MIW06-24S15M [MINMAX]
DC-DC CONVERTER 6W;
| 型号： | MIW06-24S15M |
| 厂家： | 
MINMAX TECHNOLOGY CO., LTD. |
| 描述： | DC-DC CONVERTER 6W DC-DC转换器 |
| 文件： | 总5页 (文件大小：941K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
MIW06M SERIES
DC-DC CONVERTER 6W, DIP-Package
FEATURES
►Industrial Standard DIP-24 Package
►Wide 2:1 Input Voltage Range
►Fully Regulated Output Voltage
►I/O Isolation 5000VAC with Reinforced Insulation, rated for 250Vrms
Working Voltage
►Creepage & Clearance Distance meet 8mm
►Low Leakage Current < 2μA
►Operating Ambient Temp. Range -40°C to 95°C
►No Min. Load Requirement
►Under-Voltage, Overload/Voltage and Short Circuit Protection
►Conducted EMI EN 55011 Class A & FCC Level A Approved
►Medical EMC Standard with 4th Edition of EMI EN 55011 and EMS
EN 60601-1-2 Approved
►Medical Safety with 2xMOPP per 3rd Edition of IEC/EN 60601-1 &
ANSI/AAMI ES60601-1 Approved with CE Marking
PRODUCT OVERVIEW
The MINMAX MIW06M series is a new range of high performance 6W medical approved DC-DC converter within encapsulated DIP-24 package which
specifically design for medical applications. There are 15 models available for input voltage of 12, 24, 48VDC with wide 2:1 input range and tight output
voltage. The I/O isolation is specified for 5000VAC with reinforced insulation, which rated for 250Vrms working voltage. Further features include
under-voltage, overload, short circuit protection, no min. load requirement,conducted EMI EN 55011 class A approved, low leakage current 2μA max. and
operating ambient temp. range by -40°C to 95°C without derating by high efficiency up to 89%. MIW06M series conform to 4th edition medical EMC
standard, medical safety with 2xMOPP (Means Of Patient Protection) per 3rd edition of IEC/EN 60601-1 & ANSI/AAMI ES 60601-1 approved and 8mm
creepage and clearance.
The MIW06M series offer a superior solution for demanding application in medical instrument requesting a certified supplementary and reinforced insulation
system to comply with latest medical safety approval for 2xMOPP requirement.
Model Selection Guide
Over
Voltage
Max. capacitive
Load
Model
Input
Voltage
(Range)
VDC
Output
Output
Current
Max.
mA
Input Current
Efficiency
Number
Voltage
(typ.)
Protection
@Max. Load
@No Load
mA(typ.)
@Max. Load
VDC
5
mA(typ.)
595
575
581
575
575
298
287
287
291
287
149
144
140
144
142
VDC
6.2
15
μF
1500
%
MIW06-12S05M
MIW06-12S12M
MIW06-12S15M
MIW06-12D12M
MIW06-12D15M
MIW06-24S05M
MIW06-24S12M
MIW06-24S15M
MIW06-24D12M
MIW06-24D15M
MIW06-48S05M
MIW06-48S12M
MIW06-48S15M
MIW06-48D12M
MIW06-48D15M
1200
500
84
87
86
87
87
84
87
87
86
87
84
87
89
87
88
12
260
12
18
15
400
10
210
(9 ~ 18)
±15
±18
6.2
15
±12
±15
5
±250
±200
1200
500
150#
110#
1500
12
260
24
18
15
400
8
210
(18 ~ 36)
±15
±18
6.2
15
±12
±15
5
±250
±200
1200
500
150#
110#
1500
12
260
48
18
15
400
5
210
(36 ~75)
±15
±18
±12
±15
±250
±200
150#
110#
# For each output
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2018/04/20 REV:4 Page 1 of 5
®
MIW06M SERIES
DC-DC CONVERTER 6W, DIP-Package
Input Specifications
Parameter
Model
12V Input Models
Min.
-0.7
-0.7
-0.7
---
Typ.
---
---
---
---
---
---
8
Max.
25
50
100
9
Unit
VDC
ms
Input Surge Voltage (1 sec. max.)
Start-Up Threshold Voltage
Under Voltage Shutdown
24V Input Models
48V Input Models
12V Input Models
24V Input Models
---
18
36
---
48V Input Models
---
12V Input Models
---
24V Input Models
---
16
34
---
---
48V Input Models
---
---
Start Up Time (Power On)
Input Filter
Nominal Vin and Constant Resistive Load
All Models
---
30
Internal Pi Type
Output Specifications
Parameter
Conditions
Min.
---
Typ.
---
Max.
Unit
Output Voltage Setting Accuracy
Output Voltage Balance
Line Regulation
±1.0
±2.0
±0.5
±0.5
±1.0
±5.0
%Vnom.
Dual Output, Balanced Loads
Vin=Min. to Max. @Full Load
Single Output
---
±0.5
---
%
%
%
%
%
---
---
---
Load Regulation
Io=0% to 100%
Dual Output
---
---
Load Cross Regulation (Dual Output)
Minimum Load
Asymmetrical Load 25%/100% Full Load
---
---
No minimum Load Requirement
Ripple & Noise
0-20 MHz Bandwidth
Measured with a 1μF/25V MLCC
---
---
---
---
---
---
300
±3
70
---
±5
---
---
mV P-P
μsec
%
Transient Recovery Time
Transient Response Deviation
Temperature Coefficient
Over Load Protection
25% Load Step Change
±0.01
150
%/℃
%
Short Circuit Protection
Hiccup Mode 0.5Hz typ., Automatic Recovery
Isolation, Safety Standards
Parameter
Conditions
60 Seconds
Min.
Typ.
---
Max.
---
Unit
I/O Isolation Voltage
5000
VACrms
Reinforced insulation, rated for 250Vrms working voltage
Leakage Current
240VAC, 60Hz
500 VDC
---
10
---
---
---
---
2
μA
GΩ
pF
I/O Isolation Resistance
I/O Isolation Capacitance
---
40
100KHz, 1V
ANSI/AAMI ES 60601-1, CAN/CSA-C22.2 No. 60601-1
IEC/EN 60601-1 3rd Edition 2xMOPP
ANSI/AAMI ES 60601-1 2xMOPP recognition (UL certificate), IEC/EN 60601-1 3rd Edition (CB-report)
Safety Standards
Safety Approvals
General Specifications
Parameter
Switching Frequency
MTBF(calculated)
Conditions
Min.
---
Typ.
330
---
Max.
---
Unit
kHz
MIL-HDBK-217F@25℃, Ground Benign
4,667,952
---
Hours
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2018/04/20 REV:4 Page 2 of 5
®
MIW06M SERIES
DC-DC CONVERTER 6W, DIP-Package
Environmental Specifications
Parameter
Conditions
Min.
-40
Max.
+95
Unit
Operating Ambient Temperature Range
(See Power Derating Curve)
Case Temperature
Natural Convection
℃
---
-50
---
+105
+125
95
℃
℃
Storage Temperature Range
Humidity (non condensing)
Cooling
% rel. H
Natural Convection
Lead Temperature (1.5mm from case for 10Sec.)
---
260
℃
EMC Specifications
Parameter
Standards & Level
Performance
Conduction
EN 55011, FCC part 15
Class A
EMI
EN 60601-1-2 4th
ESD
EN 61000-4-2 Air ± 15kV, Contact ± 8kV
EN 61000-4-3 10V/m
A
A
A
A
A
A
Radiated immunity
Fast transient (5)
Surge (5)
EN 61000-4-4 ±2kV
EMS
EN 61000-4-5 ±2kV
EN 61000-4-6 10Vrms
EN 61000-4-8 30A/m
Conducted immunity
PFMF
Power Derating Curve
Notes
1
2
3
4
5
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
We recommend to protect the converter by a slow blow fuse in the input supply line.
Other input and output voltage may be available, please contact factory.
To meet EN 61000-4-4 & EN61000-4-5 an external capacitor across the input pins is required.
Suggested capacitor: 12XXX: CHEMI-CON KY Series 560μF/50V
24XXX: CHEMI-CON KY Series 470μF/50V
48XXX: CHEMI-CON KY Series 330μF/100V
6
7
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2018/04/20 REV:4 Page 3 of 5
®
MIW06M SERIES
DC-DC CONVERTER 6W, DIP-Package
Package Specifications
Mechanical Dimensions
Pin Connections
Pin
1
Single Output
+Vin
Dual Output
+Vin
11
12
13
15
23
24
No Pin
-Vout
Common
No Pin
-Vout
+Vout
No Pin
-Vin
+Vout
-Vin
0.60 [0.024]
-Vin
-Vin
1
11 12
Bottom View
24 23
15
13
►All dimensions in mm (inches)
►Tolerance: X.X±0.5 (X.XX±0.02)
20.32 [0.80]
31.8 [1.25]
5.08
[0.20]
2.54
[0.10]
2.0
[0.08]
X.XX±0.25 ( X.XXX±0.01)
►Pin diameter 0.5 ±0.05 (0.02±0.002)
Physical Characteristics
Case Size
Case Material
Pin Material
Weight
:
:
:
:
31.8x20.3x12.0mm (1.25x0.80x0.47 inches)
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Tinned Copper
15.5g
E-mail:sales@minmax.com.tw Tel:886-6-2923150
2018/04/20 REV:4 Page 4 of 5
®
MIW06M SERIES
DC-DC CONVERTER 6W, DIP-Package
Test Setup
Peak-to-Peak Output Noise Measurement Test
Refer to the output specifications or add 4.7μF capacitor if the output specifications undefine Cout. Scope measurement should be made by using a BNC socket,
measurement bandwidth is 0-20 MHz. Position the load between 50 mm and 75 mm from the DC-DC Converter.
Copper Strip
+Vin
+Out
Copper Strip
Cout
+Vin
+Out
Com.
-Out
Scope
Scope
Cout
Single Output
DC / DC
Converter
Dual Output
DC / DC
Converter
Resistive
Load
Resistive
Load
Scope
Copper Strip
Cout
-Vin
-Out
Copper Strip
-Vin
Copper Strip
Technical Notes
Overload Protection
To provide hiccup mode protection in a fault (output overload) condition, the unit is equipped with internal current limiting circuitry and can endure overload for an
unlimited duration.
Overvoltage Protection
The output overvoltage clamp consists of control circuitry, which is independent of the primary regulation loop, that monitors the voltage on the output terminals.
The control loop of the clamp has a higher voltage set point than the primary loop. This provides a redundant voltage control that reduces the risk of output
overvoltage. The OVP level can be found in the output data.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In
applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor on the input to insure startup. By using a good
quality low Equivalent Series Resistance (ESR < 1.0Ω at 100 kHz) capacitor of a 10μF for the 12V input devices and a 4.7μF for the 24V input devices and a 2.2μF
for the 48V devices, capacitor mounted close to the power module helps ensure stability of the unit.
+
+Vin
+Out
+
DC / DC
Converter
DC Power
Source
Load
Cin
-
-Vin
-Out
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple, it is
recommended to use 4.7μF capacitors at the output.
+
+Vin
-Vin
+Out
+
+Vin
-Vin
+Out
Single Output
DC / DC
Converter
Load
Load
Dual Output
DC Power
Source
Cout
Cout
DC Power
Source
DC / DC Com.
Converter
Cout
Load
-
-Out
-
-Out
Maximum Capacitive Load
The MIW06M series has limitation of maximum connected capacitance on the output. The power module may operate in current limiting mode during start-up,
affecting the ramp-up and the startup time. Connect capacitors at the point of load for best performance. The maximum capacitance can be found in the data sheet.
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the
maximum temperature rating of the components inside the power module, the case temperature must be kept below 105℃. The derating curves are determined from
measurements obtained in a test setup.
Position of air velocity
probe and thermocouple
Air Flow
50mm / 2in
15mm / 0.6in
DUT
Minmax Technology Co., Ltd.
18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan
Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: sales@minmax.com.tw
2018/04/20 REV:4 Page 5 of 5
相关型号：
©2020 ICPDF网 联系我们和版权申明