MF-2500STA-009VA [MITSUBISHI]
Transmitter, 1-Func;
| 型号： | MF-2500STA-009VA |
| 厂家： | 
Mitsubishi Group |
| 描述： | Transmitter, 1-Func ATM 异步传输模式 电信 电信集成电路 |
| 文件： | 总12页 (文件大小：342K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
DESCRIPTION
This product is designed to provide high optical
performance for SDH STM-16/SONET OC-48.
Transmitter uses uncooled laser module with
drivered by specific integrated circuit.
Receiver uses PD or APD pre-amp module and
integrated circuits for re-shaping, re-timing and
re-generating optical signal.
FEATURES
Full SONET/SDH line up
Low cost
Compact, low power
+5V single power supply
DC/DC converter built in for Rx
Case Temperature Range:
Class 1;-5 to +75deg.C
Class 2;-40 to +85deg.C
Clock recovery
l
l
l
l
l
l
l
l
l
Multi Source Agreement
FEC Rate 2.666Gb/s optional
APPLICATION
Short haul and long haul digital optical communication
systems for SDH STM-16 / SONET OC-48.
STM-16 : S-16.1, L-16.1, L-16.2, V-16.2
SONET : IR-1, LR-1, LR-2
Absolute Maximum Ratings
Stress below listed absolute maximum rating may cause permanent damage to the module.
This is a stress only and functional operation of the module at these or any other conditions in excess of
those given in the operational sections of this data sheet .
Exposure to Absolute Maximum Rating for extended periods may affect module reliability.
Tc=25deg.C.
Parameters
Symbol
Vcc
Vee
-
Ratings
+6.0
Unit
V
Supply voltage
-6.0
V
High output current
Input voltage
+/- 20
Vcc
mA
V
0
Storage temperature
Tstg
-40 to +85
deg.C.
class 1 : -5 to +75
class 2 : -40 to +85
Operating case temperature
Tc
deg.C.
Soldering Temperature
Soldering Time
-
-
-
-
+260
10
deg.C.
sec
Relative humidity(non condensation)
Fiber bend radius
10 to 80
32
%
mm
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
Block diagram
LD Module
:integrated device
VCC
VCC
LD
OPT.OUT
PD
Driver IC
SELC
DATAin
Monitoring for
back face current
DATAin
CLOCKin
CLOCKin
Driver IC
Monitoring
for LD current
APC IC
Laser Degrade
Alarm
APC
Modulation
Control
SDC
Transmitter
OILV
Monitor
DATAout
PD
DATAout
CLKout
CLKout
OPT.IN
Decider
Preamp
Alarm
PLL
Clock recovery IC
PD-Preamp Module
Signal Detect
S-16.1 / IR-1 Receiver
OILV
Monitor
DC/DC
APD Control
Amp
DATAout
APD
DATAout
CLKout
OPT.IN
Decider
Preamp
CLKout
Alarm
PLL
Clock recovery IC
AGC amp
APD-Preamp Module
Signal Detect
DTV
L16.1 / LR-1, L16.2 / LR-2,V-16.2 Receiver
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
Electrical characteristics
All parameters are specified over the operating case temperature.
Measurement conditions are at 2488.32Mb/s +/-20ppm, NRZ PN223-1 and 50% duty cycle data signal.
Vcc=+5.0V+/-5%.
2666.057 Mb/s is optional. The parameters with * mark should be specified separately.
Temperature range : class1 : -5deg.C. to +75deg.C, class2 : -40deg.C. to +85deg.C.
l Transmitter
Parameters
Condition
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
note 1
total
-
+4.75
-
+5.0
0.8
0.8
-
+5.25
1.6
V
W
Power consumption
-
*Input sensitivity data and clock voltage
note 2,3
NOTE7
SV
Tdi
0.5
1.0
Vpp
ps
Input data and clock phase
Shut Down Command (SDC)
activation time
-125
+125
-
-
-
1
ms
SDC de-activation time
-
-
-
-
-
-
-
-
150
-
+10
-
+10
Vcc
0.8
ms
mV
%
mV/mA
Normalized back face voltage
Back face voltage accuracy
Monitor bias voltage
Monitor bias voltage accuracy
Logic input High level
note 5
-
note 5
-
note 4
note 4
500
-10
-
-10
2.0
0
-
20
-
-
-
%
-
-
Vih
Vil
Logic input Low level
Logic output High level
(LDA de-activate)
Logic output Low level (LDA activate)
note 4
Voh
Vol
2.7
0
-
-
Vcc
0.5
-
-
note 4
note : Vcc-Vee ; with Vcc at +5V Vee must be at 0V
note : Internally AC coupled with 50ohm internal termination
note1 : Vcc-Vee ; with Vcc at +5V Vee must be at 0V
If customer need to operate under –5.2V power supply ,please contact MITSUBISHI .
note2 : Internally AC coupled with 50ohm internal termination
* note3 : This sensitivity is achieved by applying at minimum either a 0.5Vpp signal on one input while
the other input is tied to ground or by applying two complementary 0.25Vpp signal on both inputs.
note4 : when Vcc at +5V and Vee at 0V
note5 : This voltage is measured taking Vee as reference.
l Receiver
Parameters
Condition
Symbol
Min.
Typ.
Max.
Unit
Positive supply voltage
note 6
total
total
-
-
-
+4.75
-
-
0.3
0.6
-75
-
+5.0
1.5
2.4
0.4
0.8
-
+5.25
2.5
3
1
2
V
W
W
Vpp
Vpp
ps
Power consumption ( S-16.1 )
Power consumption ( Others )
*Output data and clock voltage single ended
*Output data and clock voltage differential
Output data and clock phase
Output data and clock rise and fall time
*Jitter generation
SV
DV
Tdo
Tr / Tf
NOTE8
NOTE9
75
150
-
ps
GR-253/ITU-T G783
GR-253/ITU-T G783
GR-253/ITU-T G783
Ulrms
Ulpp
dB
*Jitter tolerance
*Jitter transfer peaking
Loss of Power Alarm (LPA)
activation BER
LPA de-activation BER
LPA hysteresis
LPA activation time
LPA de-activation time
Logic output High level (LPA activate)
Logic output Low level (LPA de-activate)
-
-
10-3
10-4
-
-
-
-
-
-
-
-
-
-
No chattering
-
-
-
-
-
-
1
5
Vcc
0.5
ms
ms
-
-
note 4
note 4
Voh
Vol
2.7
0
-
note 6 : If customer need to operate under -5.2V power supply, please contact MITSUBISHI .
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
Optical characteristics
2666.057 Mb/s is optional. The parameters with * mark should be specified separately.
cond.
symb.
Min.
Typ.
Max.
Min
Typ.
Max
24
ITU-T/SONET
Optical budget
-
-
-
S-16.1/IR-1
-
L-16.1/LR-1
-
-
dB
note8
0
12
10
Transmitter
Center wavelength
Optical source
Optical output power
Shutdown optical power
Spectral width
SMSR
Extinction ratio
Eye Opening
Dispersion
-
-
-
-
1270
1310
SLM
-2
-50
0.3
-
1360
1280
1310
SLM
0
-50
0.3
-
1335
nm
-
dBm
dBm
nm
dB
dB
-
ps/nm
note9
-
note10
Snom
Sidle
-
-
ER
-
-
-4.5
-
-
30
8.2
0
-40
1
-
-
-1.5
-
-
30
8.2
+3
-40
1
-
-
-
note11
-
-
-
-
ITU-T G.957 STM16
100
ITU-T G.957 STM16
-
-
-
250
-
-
Output Jitter
(12 kHz to 20 MHz)
-
-
-
-
0.007
-
0.007
UIrms
Output Jitter
(5 kHz to 20 MHz)
maximum return loss
-
-
-
-
-
-
-
-
0.15
24
-
-
-
-
0.15
24
UIpp
dB
Receiver
note12
note13
note14
*Receiver sensitivity
Rsen
-
-20.5
-18.5
-
-29.5
-27.5
dBm
*Receiver overload
Path penalty
Maximum reflectance
Rovr
-
-
0
-
-
+1
0.2
-
-
1
-27
-8
-
-
-7
0.2
-
-
1
-27
dBm
dB
dB
-
-
cond.
-
note8
Symb.
-
-
Min.
10
Typ.
L-16.2/LR-2
-
Max.
24
Min
22
Typ.
V-16.2
-
Max
33
ITU-T/SONET
Optical budget
-
dB
Transmitter
Center wavelength
Optical source
Optical output power
Shutdown optical power
Spectral width
SMSR
Extinction ratio
Eye Opening
Dispersion
-
-
-
-
1500
1530
SLM
0
-50
0.3
-
1580
1530
1545
SLM
0
-50
0.3
-
1565
nm
-
dBm
dBm
nm
dB
dB
-
ps/nm
note9
-
note10
Snom
Sidle
-
-
ER
-
-
-1.5
-
-
30
8.2
+3
-40
1
-
-
-4.5
-
-
30
8.2
+3
-40
0.8
-
-
note11
-
-
-
-
-
ITU-T G.957 STM16
1600
ITU-T G.957 STM16
2400
-
-
-
-
Output Jitter
(12 kHz to 20 MHz)
-
-
-
-
0.007
-
-
0.007
UIrms
Output Jitter
(5 kHz to 20 MHz)
maximum return loss
-
-
-
-
-
-
-
-
0.15
24
-
-
-
-
0.15
24
UIpp
dB
Receiver
note12
note13
note14
Receiver sensitivity
Rsen
-
-30.5
-28.5
-
-27.5
-25.5
dBm
Receiver overload
Path penalty
Maximum reflectance
Rovr
-
-
-8
-
-
-7
1.3
-
-
2
-27
-9
-
-
-8
1.5
-
-
2
-27
dBm
dB
dB
-
-
note8 : The V-16.2 version is adapted to standard 10dBm to 13dBm EDFA optical bandwidth.
note9 : Measured at the connector interface. Provision of 0.5dB is taken for S point measurement.
note10 : The maximum full width of the central wavelength peak, measured 20dB down from maximum amplitude
under modulation condition PRBS 223-1.
note11 : Measured at the connector interface under modulation condition PRBS 223-1.
note12 : Measured at BER 10-10
.
note13 : Provision of 0.5dB is taken for R point measurement if SMF fiber is used.
note14 : The device must not be damaged when this optical power is applied to the optical input.
The device is not meant to operate at such an optical input power.
All min and max. parameters are specified End-of-Life within the overall relevant operating temperature range.
The typical values are referenced to +25deg.C ,nominal power supply, beginning of life.
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
Ordering information
Transmitter : MF-2500STA-XXXXX(*1)
Receiver (PD) : MF-2500SRA-XXXXX(*2)
(APD) : MF-2500SRB-XXXXX(*3)
XXXXX(*1)
XXXXX(*2)
XXXXX(*3)
ITU code
Optical connector type
Optical connector type
Optical connector type
FC
SC
FC
SC
FC
SC
S-16.1 / IR-1 class1
002VA
002WA
002VA
002WA
S-16.1 / IR-1 class2
L-16.1 / LR-1 class1
L-16.1 / LR-1 class2
L-16.2 / LR-2 class1
L-16.2 / LR-2 class2
TBD
003VA
TBD
TBD
003WA
TBD
TBD
TBD
002VA
TBD
002WA
TBD
004VA
TBD
004WA
TBD
003VA
TBD
003WA
TBD
V-16.2
V-16.2
class1
class2
009VA
TBD
009WA
TBD
TBD
TBD
TBD
TBD
Note : 2666.057 Mb/s is optional.
Note : The parts number should be specified separately.
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
Pin Allocation
l Transmitter pin allocation
No.
Symbol
Description
No.
Symbol
Description
1
VEE
Negative power supply 4)
Monitoring for back facet PD
current
24
VCC
Positive power supply 4)
2
BACK(+)
23
GND
Ground
3
4
5
6
BIAS(+)
SDC
SELC
GND
Monitoring for LD bias current
22
21
20
19
Cki-
GND
Cki+
GND
False clock input
Ground
Shut Down Command 3)
Clock mode select 2)
True clock input 1)
Ground
Ground
Temperature Deviation
Error Monitor /
TDEM 6)
/NIC
7
18
Di-
False data input
No Internal Connection
8
9
LDA
NUC
WSC 7)
/ NIC
Laser Degrade Alarm 5)
17
16
GND
Di+
Ground
True data input
No user connection
Wavelength Selection
Command /
10
15
GND
Ground
No Internal Connection
VTEC 6)
/NIC
VCC
TEC supply voltage /
No Internal Connection
Positive power supply 4)
11
12
GND
VEE
Ground
Negative power supply 4)
14
13
1) : The falling edge of Cki+ clock input signal is at the Di+ data eye pattern crossing point.
2) : When open (or low) the module is in the operating mode. When high the module operates in non
clocked mode.
3) : When open (or low) the module is in the operating mode.
When high the module is in the shut down mode (no optical output power).
4) : Vcc-Vee; with Vcc at +5V Vee must be at 0V.
5) : When provided a digital alarm indicates that the laser is degraded.
The active level is a low level.
This pin must be teidto Vcc through a 100k ohm resistor when the digital alarm is not proved.
6) : Module with cooled LD and module for WDM only.
7) : Module for WDM only.
l Receiver pin allocation
No.
Symbol
HV / NIC
NUC
LPA
GND
Cko-
Cko+
GND
VCC
GND
Do+
Description
No.
24
23
22
21
20
19
18
17
16
15
14
13
Symbol
NUC
OILV / NIC
VCC
NUC
GND
GND
NIC/VEE
GND
Description
No user connection
1
2
3
4
5
6
7
8
High Voltage 1)
No user connection
Loss of Power Alarm 3)
Ground 2)
False clock output
True clock output 6)
Ground 2)
Positive power supply
Ground
True data output
False data output
Ground 2)
Optical Input Light Voltage 5)
Positive power supply
No user connection
Ground 2)
Ground 2)
Negative power supply7)
Ground 2)
9
GND
GND
GND
Ground 2)
10
11
12
Ground 2)
Do-
GND
Ground 2)
DTV / NIC
Decision Threshold Voltage 4)
1) : S-16.1 / IR-1 : NIC, L-16.1 / LR-1, L-16.2 / LR-2, V-16.2 : NIC
2) : Package is at same potential as GND .
3) : LPA output is a logic level that indicates the presence or absence of a sufficient optical input level.
A logical high level indicates an input optical level too low.
4) : This pin is not internally connected if the amplitude decision threshold is not made adjustable.
S-16.1 :NIC , L-16.1 /L-16.2/V-16.2 : TBD
5) : OILV function is optional. If customer requires OILV, please contact MITSUBISHI.
This pin is not internally connected if the Optical Input Light Voltage functionality is not provided.
6) : The falling edge of Cko+ clock output signal is in the middle of Do+ data pattern .
7) : This pin is Not Internally Connected(NIC) as standard.
This pin is reserved for in case of V= -5.2 V operation or future application.
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
General Outline Drawing
NOTE : DIMENSIONS ARE IN MILLIMETERS
NOTE : TOLERANCES UNLESS NOTED +/- 0.5 mm
l Transmitter
Note : This hole is used for testing by MITSUBISHI.
Recommendation is that the pattern that is faced with this hole on
customer board should be ground or no pattern .
Note : This drawing is in case of FC connector.
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
l Receiver (S-16.1/IR-1)
Note : This drawing is in case of FC connector.
l Receiver (L-16.1/LR-1,L-16.2/LR-2,V-16.2)
Note This hole is used for testing by MITSUBISHI. Recommendation is that the pattern that is
faced with this hole on customer board should be ground or no pattern .
Note : This drawing is in case of FC connector.
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
APPLICATION NOTES
l NOTE1 : Data / Clock Input interface
Transmitter
Di+
Di-
50W
VBB
AC Coupled Interface
l NOTE2 : Shut Down Command (SDC) interface
Shut Down Command
Optical output
ON
OFF
Transmitter
TTL
SDC
100kW
comparator
l NOTE3
Clock Select (SELC) interface
SELC
Clock mode
Clocked
Non-Clocked
Transmitter
TTL
SELC
100kW
comparator
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
l NOTE4 : Laser bias / Laser back facet monitor interface
LD Module
Laser back facet
current monitor
Laser bias
current monitor
APC
l NOTE5 : Data / Clock Output interface
Output stage
Customer logic
reference
l NOTE6 : Signal detect interface
OFF
ON
Optical Input
Signal detect
Receiver
Signal detect
TTL
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
l NOTE7 : Transmitter Data / Clock Input Phase
Cki+
Tdi
-
+
Di+
l NOTE8 : Receiver Data / Clock Output Phase
Cko+
Tdo
-
+
Do+
T / 2
T
l NOTE9 : Receiver Data / Clock Output Rise / Fall Time
80%
20%
Cko+ / -
Tr
Tf
Tf
80%
20%
Do+ / -
Tr
MITSUBISHI (OPTICAL DEVICES)
MF-2500STA-xxxxx
MF-2500SRA-xxxxx
MF-2500SRB-xxxxx
SONET / SDH TRANSMITTER / RECEIVER MODULE
Typical performance
l S-16.1 Optical eye pattern
(wide band)
(Mask)
l S-16.1 Receiver sensitivity
(back to back)
Note
MITSUBISHI ELECTRIC. reserves the right to make changes to the products or information
contained herein without notice.
Customer versions are available for large quantities.
The end of document
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明