MM3376A35NRE [MITSUMI]

150mA CMOS Voltage Regulator IC;
MM3376A35NRE
型号: MM3376A35NRE
厂家: MITSUMI ELECTRONICS, CORP.    MITSUMI ELECTRONICS, CORP.
描述:

150mA CMOS Voltage Regulator IC

文件: 总11页 (文件大小:83K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
150mA CMOS Voltage Regulator IC  
Monolithic IC MM3376AX Series  
Outline  
This IC is a regulator IC providing low supply current (1.7µA) and low input voltage (1.2~6V), developed using  
the CMOS process, and supports longer battery life with a chip enable function. In addition, it is ideal to  
be used for a constant voltage power supply for backup as it includes a reverse current protection function  
to automatically prevent a current (0.1µA max.) from reversely flowing to the input terminal side if a voltage  
exceeding the input terminal voltage (VDD) is applied to the output terminal (VOUT) by monitoring the voltages  
of the output terminal (VOUT) and input terminal (VDD).  
Features  
1. Input voltage range  
2. Output voltage range  
3. Output voltage accuracy  
4. Maximum output current  
5. Supply current  
1.2~6V  
0.8~5.0V  
OUT  
V
2%  
150mA  
1.7µA typ.(No-Load Input Current)  
0.6µA typ.(OFF)  
6. Reverse current  
0.1µA max.  
7. Output capacitor  
8. Dropout voltage  
9. Output short-circuit current  
10. Line regulation  
0.1µF  
30mV typ. / 50mV max. (Io=10mA 3.3V VOUT 5.0V)  
60mA typ.  
0.05%V typ. (Io=1mA)  
30mV typ. / 90mV max. (Io=1~150mA)  
11. Load regulation  
Package  
SOT-25A  
SSON-4  
SC-82  
Applications  
1. Cellular Phones  
2. Portable Games  
3. PDAs  
4. Digital still Cameras  
5. Note PCs  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
Block Diagram  
VDD  
VOUT  
Reverse  
Current  
CE  
Bias  
Protection  
Current  
Limit  
Voltage  
Comparator  
Vref  
GND  
Pin Assignment  
4
1
3
2
5
1
4
3
4
1
3
2
2
SSON-4  
(TOP VIEW)  
-
SC-82  
SOT 25A  
(TOP VIEW)  
(TOP VIEW)  
1
2
3
4
5
VDD  
GND  
CE  
NC  
VOUT  
1
2
3
4
GND  
CE  
VDD  
1
2
3
4
CE  
GND  
VOUT  
VDD  
VOUT  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
Pin Description  
SOT-25A  
SSON-4  
Pin No. Pin name  
Functions  
Pin No. Pin name  
Functions  
Ground pin  
1
2
VDD  
GND  
Voltage  
-
supply pin  
Ground pin  
1
GND  
ON/OFF  
-
Control pin  
OUTPUT  
OFF  
ON/OFF  
-
Control pin  
OUTPUT  
OFF  
CE  
Low  
CE  
Low  
High  
2
CE  
High  
ON  
3
CE  
ON  
Connect CE pin with VDD pin,  
when it is not used.  
Connect CE pin with VDD pin,  
when it is not used.  
3
4
VDD  
VOUT  
Voltage-supply pin  
4
5
NC  
VOUT  
No connection  
Output pin  
Output pin  
SC-82  
Pin No. Pin name  
Functions  
ON/OFF  
-
Control pin  
OUTPUT  
OFF  
CE  
Low  
1
CE  
High  
ON  
Connect CE pin with VDD pin,  
when it is not used.  
2
3
4
GND  
VOUT  
VDD  
Ground pin  
Output pin  
Voltage-supply pin  
(Except where noted otherwise Ta=25°C)  
Absolute Maximum Ratings  
Item  
Symbol  
TSTG  
VDD  
VCE  
VOUT  
IOUT  
Ratings  
−55~+150  
6.5  
−0.3~6.5  
−0.3~6.5  
200  
Units  
°C  
V
V
V
Storage temperature  
Supply voltage  
CE input voltage  
Output voltage  
Output current  
mA  
350(Note1)(SOT  
330(Note2)(SSON  
-
25A)  
4B)  
82ABB)  
Power dissipation  
Pd  
-
mW  
240(Note3)(SC  
-
Note1 : With PC Board of glass epoxy.  
Note2 : With PC Board of glass epoxy 110 40 0.8tmm  
Note3 : With PC Boad of glass epoxy (The tab pin is not connected with PC Boad.) 100 100 1.6tmm  
(Except where noted otherwise Ta=25°C)  
Recommended Operating Conditions  
Item  
Symbol  
TJOP  
VOP  
Ratings  
40~85  
Vo+0.3~6  
0~150  
Units  
°C  
V
Operating ambient temperature  
Operating voltage  
Output current  
-
IOUT  
mA  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
(Except where noted otherwise VDD=VO(typ.)+1V, VCE=VDD, Ta=25°C)  
Electrical Characteristics 1  
Item  
Symbol  
Measurement conditions  
VCE=0V  
Min. Typ. Max. Units  
Input current (OFF)  
No-load input current  
Output voltage  
IDDoff  
IDD  
0.6  
1.7  
1.2  
μA  
μA  
V
IOUT=0mA  
3.5  
VOUT  
IOUT=1mA  
0.98  
1.02  
IOUT=1mA  
VOUT(typ.)+1V VDD 6V  
Line regulation  
VLINE  
0.05 0.20 %/V  
Load regulation  
Dropout voltage  
VLOAD  
Vio  
1mA IOUT 150mA  
30  
90  
mV  
V
Please refer to another page  
Output short-circuit current  
(Note4)  
Ilim  
VOUT=0V  
60  
mA  
VOUT temperature coefficient  
(Note4)  
IOUT=30mA  
40 TOP 85°C  
V
OUT  
/
T
OP  
100  
0.5  
ppm/°C  
-
CE pin current  
CE H threshold voltage  
CE L threshold voltage  
Reverse current  
ICE  
μA  
V
VCEH  
VCEL  
IREV  
1.0  
0
VDD  
0.3  
V
VOUT>0.5V, 0V VDD 6V  
0.1  
μA  
Note4 : The item is guaranteed by design.  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
(Except where noted otherwise VDD=VOUT(typ.)+1V, VCE=VDD, Ta=25°C)  
Item  
Electrical Characteristics 2  
Output voltage  
Dropout voltage  
Vio (V)  
Model No.  
V
OUT (V)  
Min.  
Measurement conditions  
Typ.  
0.8  
0.9  
1.0  
1.1  
1.2  
1.3  
1.4  
1.5  
1.6  
1.7  
1.8  
1.9  
2.0  
2.1  
2.2  
2.3  
2.4  
2.5  
2.6  
2.7  
2.8  
2.9  
3.0  
3.1  
3.2  
3.3  
3.4  
3.5  
3.6  
3.7  
3.8  
3.9  
4.0  
4.1  
4.2  
4.3  
4.4  
4.5  
4.6  
4.7  
4.8  
4.9  
5.0  
Max. Measurement conditions Min.  
Typ.  
Max.  
MM3376A08NRE  
MM3376A09NRE  
MM3376A10NRE  
MM3376A11NRE  
MM3376A12NRE  
MM3376A13NRE  
MM3376A14NRE  
MM3376A15NRE  
MM3376A16NRE  
MM3376A17NRE  
MM3376A18NRE  
MM3376A19NRE  
MM3376A20NRE  
MM3376A21NRE  
MM3376A22NRE  
MM3376A23NRE  
MM3376A24NRE  
MM3376A25NRE  
MM3376A26NRE  
MM3376A27NRE  
MM3376A28NRE  
MM3376A29NRE  
MM3376A30NRE  
MM3376A31NRE  
MM3376A32NRE  
MM3376A33NRE  
MM3376A34NRE  
MM3376A35NRE  
MM3376A36NRE  
MM3376A37NRE  
MM3376A38NRE  
MM3376A39NRE  
MM3376A40NRE  
MM3376A41NRE  
MM3376A42NRE  
MM3376A43NRE  
MM3376A44NRE  
MM3376A45NRE  
MM3376A46NRE  
MM3376A47NRE  
MM3376A48NRE  
MM3376A49NRE  
MM3376A50NRE  
0.770  
0.870  
0.970  
1.070  
1.170  
1.270  
1.370  
1.470  
1.568  
1.666  
1.764  
1.862  
1.960  
2.058  
2.156  
2.254  
2.352  
2.450  
2.548  
2.646  
2.744  
2.842  
2.940  
3.038  
3.136  
3.234  
3.332  
3.430  
3.528  
3.626  
3.724  
3.822  
3.920  
4.018  
4.116  
4.214  
4.312  
4.410  
4.508  
4.606  
4.704  
4.802  
4.900  
0.830  
0.930  
1.030  
1.130  
1.230  
1.330  
1.430  
1.530  
1.632  
1.734  
1.836  
1.938  
2.040  
2.142  
(Note5)  
IOUT=10mA  
0.12  
0.08  
0.15  
0.12  
1.5V VOUT 1.9V  
IOUT=10mA  
2.244 2.0V VOUT 2.4V  
2.346  
2.448  
2.550  
2.652  
2.754 2.5V VOUT 2.9V  
2.856  
2.958  
3.060  
VDD=VOUT-0.2V  
IOUT=10mA  
0.06  
0.05  
0.08  
0.07  
VDD=VOUT-0.2V  
IOUT=1mA  
IOUT=10mA  
3.162 3.0V VOUT 3.2V  
VDD=VOUT 0.2V  
3.264  
3.366  
3.468  
3.570  
3.672  
3.774  
3.876  
3.978  
4.080  
4.182  
4.284  
4.386  
4.488  
4.590  
4.692  
4.794  
4.896  
4.998  
5.100  
-
IOUT=10mA  
3.3V VOUT 5.0V  
0.03  
0.05  
VDD=VOUT-0.2V  
Note5 : The item is not guaranteed in the model less than VOUT=1.4V .  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
Measuring Circuit  
A
Ceramic  
0.1µF  
VDD  
A
CE  
VOUT  
A
Ceramic  
0.1µF  
GND  
V
Basic Measuring Circuit  
Ceramic  
0.1µF  
VDD  
CE  
VOUT  
A
GND  
Reverse Current Measuring Circuit  
Application Circuit  
Ceramic  
0.1µF  
VDD  
CE  
VOUT  
Ceramic  
0.1µF  
GND  
· Note  
1. The output capacitor is required between output and GND to prevent oscillation.  
2. The ESR of capacitor must be defined in ESR stability area.  
It is possible to use a ceramic capacitor without ESR resistance for output.  
The ceramic capacitor must be used more than 0.1μF and B temperature characteristics.  
3. The wire of VCC and GND is required to print full ground plane for noise and stability.  
4. The input capacitor must be connected a distance of less than 1cm from input pin.  
5. Be careful because it becomes easy to overshoot output voltage at the time of input voltage starting when an  
output capacitance is smaller than 0.47μF.  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
Timing Chart  
1) Reverse current mode  
When VDD (from battery, AC adaptor  
or other sources) is opened,  
the current is discharged from  
the loads (Rin and Cin) in the input side.  
V
VDD  
VOUT  
t
REG mode  
Reverse current mode  
V
VCE  
t
2) During the input voltage build-up  
When VCE terminal is shorted to VDD.  
V
VDD=VCE  
VOUT  
t
REG mode  
Reverse current mode  
While voltage is building up in the input side,  
this IC operates in the reverse current mode when  
V (Difference between input and output voltages)  
is 30mV (Reverse current mode threshold voltage) or less.  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
(Except where noted otherwise Ta=25°C, VDD=VOUT (typ.) +1V, VCE=VDD, Cin=0.1µF, Co=0.1µF)  
Characteristics (Vo=1.1V)  
Input voltage - Output voltage  
Input current - Input voltage  
RL=  
2.0  
2.0  
1.5  
1.5  
1.0  
0.5  
0.0  
RL=1.1k  
RL=11  
1.0  
0.5  
RL=7.3  
0.0  
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input voltage (V)  
Input voltage (V)  
Load regulation  
Line regulation  
VDD=2.6V  
RL=1.1k  
60  
40  
2
1
0
20  
0
−20  
−1  
−2  
−40  
−60  
0
50  
100  
150  
200  
1
2
3
4
5
6
Output current (mA)  
Input voltage (V)  
Temperature - output voltage  
Ripple rejection  
RL=1.1k  
1.20  
0
−20  
1.15  
1.10  
1.05  
1.00  
RL=7.3  
−40  
−60  
RL=33  
−80  
RL=1.1k  
−100  
−50 −25  
0
25 50 75 100 125 150  
0.01  
0.1  
1
10  
100  
1000  
Temperature(ºC)  
Frequency (kHz)  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
(Except where noted otherwise Ta=25°C, VDD=VOUT (typ.) +1V, VCE=VDD, Cin=0.1µF, Co=0.1µF)  
Characteristics (Vo=3.3V)  
Input voltage - Output voltage  
Input current - Input voltage  
RL=  
3.5  
3
50  
40  
30  
20  
10  
0
2.5  
RL=3.3k  
2
RL=33  
1.5  
1
RL=22  
0.5  
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input voltage (V)  
Input voltage (V)  
Load regulation  
Line regulation  
RL=3.3k  
60  
40  
2
1
0
20  
0
−20  
−40  
−60  
−1  
−2  
0
50  
100  
150  
200  
3.5  
4
4.5  
5
5.5  
6
Output current (mA)  
Input voltage (V)  
Temperature - output voltage  
Ripple rejection  
RL=3.3k  
3.5  
0
RL=110  
−20  
−40  
−60  
3.4  
3.3  
3.2  
3.1  
RL=22  
−80  
RL=3.3k  
−100  
−50 −25  
0
25 50 75 100 125 150  
0.01  
0.1  
1
10  
100  
1000  
Temperature(ºC)  
Frequency (kHz)  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
(Except where noted otherwise Ta=25°C, VDD=VOUT (typ.) +1V, VCE=VDD, Cin=0.1µF, Co=0.1µF)  
Characteristics (Vo=3.3V)  
Dropout voltage  
Current limit  
VDD=3.1V  
600  
500  
4
3.5  
3
400  
300  
200  
2.5  
2
1.5  
1
100  
0
0.5  
0
0
50  
100  
150  
200  
0
100 200 300 400 500 600  
Output current (mA)  
Output current (mA)  
GND pin current  
ESR stable area  
COUT=0.1µF  
8
7
6
5
4
3
2
1
0
1000  
Instable area  
Stable area  
100  
10  
1
0.1  
0.01  
0
50  
100  
150  
200  
0
50  
100  
150  
200  
Output current (mA)  
Output current (mA)  
Reverse current characteristics  
VDD=VCE=3.1V  
200  
150  
100  
50  
0
3
4
5
6
Output voltage (V)  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  
MITSUMI  
150mA CMOS Voltage Regulator IC MM3376AX Series  
(Except where noted otherwise Ta=25°C, VDD=VOUT (typ.) +1V, VCE=VDD, Cin=0.1µF, Co=0.1µF)  
Characteristics (Vo=5.0V)  
Input voltage - Output voltage  
Input current - Input voltage  
RL=  
6
5
20  
15  
10  
5
RL=5k  
4
RL=50  
3
2
RL=33k  
1
0
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Input voltage (V)  
Input voltage (V)  
Load regulation  
Line regulation  
RL=5k  
60  
40  
2
1
0
20  
0
−20  
−1  
−2  
−40  
−60  
0
50  
100  
150  
200  
5
5.5  
6
6.5  
7
Output current (mA)  
Input voltage (V)  
Temperature - output voltage  
Ripple rejection  
RL=5k  
5.2  
0
RL=33  
−20  
5.1  
5.0  
4.9  
4.8  
−40  
−60  
RL=50  
RL=5k  
−80  
−100  
−50 −25  
0
25 50 75 100 125 150  
0.01  
0.1  
1
10  
100  
1000  
Temperature(ºC)  
Frequency (kHz)  
• Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification.  
• The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY