ANSGA1-16.000MHZ-T [MMD]

Series - Fundamental Quartz Crystal, 16MHz Nom, ROHS COMPLIANT, MICRO MINIATURE PACKAGE-2;


型号：	ANSGA1-16.000MHZ-T
厂家：	MMD COMPONENTS
描述：	Series - Fundamental Quartz Crystal, 16MHz Nom, ROHS COMPLIANT, MICRO MINIATURE PACKAGE-2 驱动晶体谐振器
文件：	总2页 (文件大小：164K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AN Series Crystal



Micro Miniature Through Hole Crystal

Frequency Range 12.000MHz to 40.000MHz

RoHS Compliant

ELECTRICAL CHARACTERISTICS

Parameter

Value

12.000MHz to 40.000MHz

(See Part Number Guide for Option)

-40°C to +85°C

Frequency Range

Frequency Tolerance / Stability

Operating Temperature Range

Storage Temperature Range

Aging at +25°C

±3 ppm / year max

Shunt Capacitance

Less than 5pF

Load Capacitance

Equivalent Series Resistance (ESR)

Mode of Operation

(See Part Number Guide for Option)

(See ESR Chart)

Drive Level

1µW to 100µW

ENVIRONMENTAL & MECHANICAL

SPEC

Shock

Solderability

MIL-STD-883, Method 2002 Cond B

MIL-STD-883, Method 2003

EQUIVALENT SERIES RESISTANCE

CHART

Solvent

Resistance

Vibration

Gross Leak Test

Fine Leak Test

MSL

MIL-STD-202, Method 215

Frequency Range

12.000MHz to 16.000MHz

16.000MHz to 30.000MHZ

30.000MHz to 40.000MHz

ESR

Mode / Cut

Fund / AT

MIL-STD-883, Method 2007, Cond A

MIL-STD-883, Method 1014, Cond C

MIL-STD-883, Method 1014, Cond A2

Level 1 per IPC/JEDEC J-STD 20

60Ω max

50Ω max

40Ω max

Reflow

Conditions

260°C max 10 sec per

IPC/JEDEC J-STD 20

PART NUMBER GUIDE

MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688

Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com

Sales@mmdcomp.com

Pb RoHS

Compliant

Free

Revision: AN121113A

Specifications subject to change without notice

Page 1 of 2

AN Series Crystal

1. APPLICABLE STANDARDS / SPECIFICATIONS: ANSI Y14.5M, DIMENSIONS

AND TOLERANCES.

2. DIMENSIONS ARE MILLIMETERS [INCHES]. MILLIMETERS ARE THE

CONTROLLING DIMENSIONS, INCHES ARE FOR REFERENCE ONLY.

3. TOLERANCES ARE ±0.25 [.010] FOR TWO PLACE DECIMALS AND ±0.5

[.02] FOR ONE PLACE DECIMALS.

DO NOT SCALE DRAWING

Mechanical Dimensions

Revision: AN121113A

Specifications subject to change without notice

Page 2 of 2

相关型号：