0479502011_16 [MOLEX]

2.4GHz / 5GHz Wi-Fi Stand Alone Antenna, 16.00mm Width, Cable Length 200.00mm;


型号：	0479502011_16
厂家：	Molex
描述：	2.4GHz / 5GHz Wi-Fi Stand Alone Antenna, 16.00mm Width, Cable Length 200.00mm
文件：	总6页 (文件大小：109K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PRODUCT SPECIFICATION

TITLE

2.4/ 5GHz Stand Alone Antenna (34.9mm*9mm)

TABLE OF CONTENTS

1.0 SCOPE

2.0 PRODUCT DESCRIPTION

3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS

4.0 RATINGS

5.0 PERFORMANCE

6.0 TEST GROUPINGS

7.0 PACKING

REVISION: ECR/ECN INFORMATION: TITLE:

SHEET No.

EC No:

DATE:

ABU2012-0075

2012-06-19

2.4/5GHZ Stand Alone

Antenna(34.9mm*9mm)

1 of 6

DOCUMENT NUMBER:

CREATED / REVISED BY:

CHECKED BY:

APPROVED BY:

Serena Zhang2011-05-23 Amos Cheah2011-05-23 Welson Tan2011-05-23

PS-47950-001

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC

PRODUCT SPECIFICATION

2.4/5GHZ Stand Antenna

1.0 SCOPE

This Product Specification covers the mechanical, electrical and environmental performances

requirements and test methods for 2.4/5GHz stand alone antenna.

2.0 PRODUCT DESCRIPTION

2.1 PRODUCT NAME AND SERIES NUMBER (S)

Product name: 2.4/5 GHZ Stand Alone Antenna 47950-****

2.2 Design and Construction

Antenna shall be of the design, construction and physical dimensions specified on the

applicable sales drawing.

2.3 Materials

a) Flex:

b) Plating:

Refer to respective Molex sales or engineering drawings

c) Cable Line: Refer to respective Molex sales or engineering drawings

d) Connector: Refer to respective Molex sales or engineering drawings

3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS

See drawings and other sections of this specification for the relevant reference documents. In

cases where the specification differs from the drawings, the drawings take precedence.

4.0 RATINGS

4.1 RF POWER

2 WATTS

4.2 TEMPERATU

Operating:

Storage :

- 30°C to + 75°C

4.3 HUMIDITY

Storage

Test

+15~70% RH

+80~95% RH

REVISION: ECR/ECN INFORMATION: TITLE:

SHEET No.

EC No:

DATE:

ABU2012-0075

2012-06-19

2.4/5GHZ Stand Alone

Antenna(34.9mm*9mm)

2 of 6

DOCUMENT NUMBER:

CREATED / REVISED BY:

CHECKED BY:

APPROVED BY:

Serena Zhang2011-05-23 Amos Cheah2011-05-23 Welson Tan2011-05-23

PS-47950-001

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC

PRODUCT SPECIFICATION

5.0 PERFORMANCE

5.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 100mm (47950-0001)

ITEM

DESCRIPTION

TEST CONDITION

REQUIREMENT

Frequency Range

2.3GHz~5.85GHz

2.4GHz~2.5GHz 4.8GHz~6.0GHz

5.1.1

Antenna loads on PC/ABS housing with

100mm; 1.13mm diameter micro coax

cable. Measured by VNA5071C

Return Loss

< -10 dB

5.1.2

Measure antenna on recommended

PC/ABS housing through OTA chamber

Peak Gain

Total Efficiency

Polarization

3.0 dBi

>75%

4.6 dBi

>70%

5.1.3

5.1.4

5.1.5

5.1.6

Measure antenna on recommended

PC/ABS housing through OTA chamber

Measure antenna through the OTA

chamber

Liner

Measure antenna on recommended PCB

through VNA E5071C

Input Impedance

50Ohms

5.2 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 150mm (47950-1001)

ITEM

DESCRIPTION

TEST CONDITION

REQUIREMENT

2.4GHz~2.5 4.8GHz~5.0 5.0GHZ~5.

Frequency Range

2.3GHz~5.85GHz

5.2.1

GHz

85GHz

Antenna loads on PC/ABS housing with

100mm; 1.13mm diameter micro coax

cable. Measured by VNA5071C

Return Loss

< -10 dB

< -6 dB

< -10 dB

5.2.2

Measure antenna on recommended

PC/ABS housing through OTA chamber

Peak Gain

Total Efficiency

Polarization

3.0 dBi

>75%

2.7 dBi

>60%

3.7 dBi

>70%

5.2.3

5.2.4

5.2.5

5.2.6

Measure antenna on recommended

PC/ABS housing through OTA chamber

Measure antenna through the OTA

chamber

Liner

Measure antenna on recommended PCB

through VNA E5071C

Input Impedance

50Ohms

REVISION: ECR/ECN INFORMATION: TITLE:

SHEET No.

EC No:

DATE:

ABU2012-0075

2012-06-19

2.4/5GHZ Stand Alone

3 of 6

Antenna(34.9mm*9mm)

DOCUMENT NUMBER:

CREATED / REVISED BY:

CHECKED BY:

APPROVED BY:

Serena Zhang2011-05-23 Amos Cheah2011-05-23 Welson Tan2011-05-23

PS-47950-001

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC

PRODUCT SPECIFICATION

5.3 ELECTRICAL REQUIREMENTS FOR CABLE LENGTH 200mm (47950-2001)

ITEM

DESCRIPTION

TEST CONDITION

REQUIREMENT

Frequency Range

2.3GHz~5.85GHz

2.4GHz~2.5GHz 4.8GHz~6.0GHz

5.3.1

Antenna loads on PC/ABS housing with

100mm; 1.13mm diameter micro coax

cable. Measured by VNA5071C

Return Loss

< -10 dB

5.3.2

Measure antenna on recommended

PC/ABS housing through OTA chamber

Peak Gain

Total Efficiency

Polarization

2.9 dBi

>75%

5.0 dBi

>70%

5.3.3

5.3.4

5.3.5

5.3.6

Measure antenna on recommended

PC/ABS housing through OTA chamber

Measure antenna through the OTA

chamber

Liner

Measure antenna on recommended PCB

through VNA E5071C

Input Impedance

50Ohms

5.4 MECHANICAL REQUIREMENTS

ITEM

DESCRIPTION

TEST CONDITION

REQUIREMENT

Test machine :Max intelligent load tester

Stick the flex antenna in a PC block, pull

cable in horizontal direction

Pull test

Pull force >4.5N

5.5 RELIABILITY REQUIREMENTS

DESCRIPTION

Cross section

TEST CONDITION

REQUIREMENT

ITEM

5.5.1

Cross section on pad soldering area.

Check under microscope

No soldering problem

REVISION: ECR/ECN INFORMATION: TITLE:

SHEET No.

EC No:

DATE:

ABU2012-0075

2012-06-19

2.4/5GHZ Stand Alone

Antenna(34.9mm*9mm)

4 of 6

DOCUMENT NUMBER:

CREATED / REVISED BY:

CHECKED BY:

APPROVED BY:

Serena Zhang2011-05-23 Amos Cheah2011-05-23 Welson Tan2011-05-23

PS-47950-001

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC

PRODUCT SPECIFICATION

5.6 ENVIRONMENTAL REQUIREMENTS

ITEM

DESCRIPTION

TEST CONDITION

REQUIREMENT

1.Test condition:

The device under test is kept for 12 hours in

an environment with a temperature of 55

degrees and a relating humidity of 95%.

Thereafter for 12 Hours in an environment with

a temperature of 25 degrees and a relative

humidity of 95%. The cycle is repeated until a

total of 6 cycles have been completed.

Hereafter the conditions are stabilized at room

temperature.

1) Parts should meet RF

spec before and after test.

2） No cosmetic problem

Humidity Test

5.6.1

1.Test condition:

The product temperature is decreased from

room temperature to -40 degrees during 2

Hours and kept there for 2 hours. Then

temperature is increased to 85 degree during 2 1) Parts should meet RF

hours and kept for 2 hours. The temperature is spec before and after test.

then again decreased to -40 degrees during a 2） No cosmetic problem

2-hours period. The cycle is repeated until a

total of 6 cycles have been completed.

Temperature

cycling test

5.6.2

Hereafter the conditions are stabilized at room

temperature.

1.Test condition:

The device under test is exposed to a spray of

1) Parts should meet RF

spec before and after test.

a 5% (by volume) resolution of Nacl in water

for 2 hours. Thereafter the device under test is

left for 1 week in room temperature at a

relative humidity of 95%. The cycle is repeated

until a total of 2 cycles have been completed.

Here after the conditions are stabilized at room

temperature.

Salt mist test

5.6.3

2) No visible corrosion.

Discoloration accept.

The meaning of text “No Cosmetic Problem” in the table above is:

a. no soldering problem

b. no adhesion problem of glue

c. no peel off of plating

REVISION: ECR/ECN INFORMATION: TITLE:

SHEET No.

EC No:

DATE:

ABU2012-0075

2012-06-19

2.4/5GHZ Stand Alone

Antenna(34.9mm*9mm)

5 of 6

DOCUMENT NUMBER:

CREATED / REVISED BY:

CHECKED BY:

APPROVED BY:

Serena Zhang2011-05-23 Amos Cheah2011-05-23 Welson Tan2011-05-23

PS-47950-001

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC

PRODUCT SPECIFICATION

6.0 TEST GROUPINGS

Test

Item

Description

Group1 Group2 Group3 Group4

Cross section

Humidity Test

5.5.1

5.6.1

Temperature

cycling test

5.6.2

5.6.3

Salt mist test

Sample Quantity

7.0 PACKAGING

Refer to the Molex related packaging drawings.

REVISION: ECR/ECN INFORMATION: TITLE:

SHEET No.

EC No:

DATE:

ABU2012-0075

2012-06-19

2.4/5GHZ Stand Alone

Antenna(34.9mm*9mm)

6 of 6

DOCUMENT NUMBER:

CREATED / REVISED BY:

CHECKED BY:

APPROVED BY:

Serena Zhang2011-05-23 Amos Cheah2011-05-23 Welson Tan2011-05-23

PS-47950-001

TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC

相关型号：