FWDR37-62S1-K1444 [MOLEX]
D Subminiature Connector, 62 Contact(s), Female, Solder Terminal,;型号: | FWDR37-62S1-K1444 |
厂家: | Molex |
描述: | D Subminiature Connector, 62 Contact(s), Female, Solder Terminal, 连接器 |
文件: | 总5页 (文件大小:686K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Waterproof Connector Systems
Wasserdichte Steckverbindersysteme
Ordering Code for Waterproof Connectors
Bestellschlüssel für wasserdichte Steckverbinder
UL Recognized File No. E168813
The waterproofness of the end appliance is not
content of the UL-inspection
Die Wasserdichtheit des Endsystems ist nicht Inhalt
der UL-Prüfung..
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
30
DS 10/2007
Technical Data
Technische Daten
Mechanical Data
Mechanische Daten
Mechanical Data
Mechanische Daten
Protection standard / Schutzart
Operating temperature range
Betriebstemperaturbereich
DIN EN 60529 - IP 67
-25 °C bis +70 °C (-13 °F to +158 °F)
Electrical Data
Elektrische Daten
Electrical Data
Elektrische Daten
Current rating
Maximale Stromstärke
Test voltage between 2 contacts / shell and contact
Prüfspannung zwischen 2 Kontakten bzw. Kontakt und Gehäuse
Insulation resistance
Isolationswiderstand
Contact resistance
Durchgangswiderstand
3 A
1000 V
000 M
≤ 15 m
Materials and Platings
Materialien und Oberflächen
Materials and Platings
Materialien und Oberflächen
Shell
Brass, tin plated over nickel
Gehäuse
Insulator
Messing, verzinnt über Nickel
Thermoplastic, glass filled (UL94V-0)
Thermoplast, glasfaserverstärkt (UL94V-0)
nickel plated zinc die-cast
Zinkdruckguss, vernickelt
Isolierkörper
Metal watertight frame
Metalldichtrahmen
Contact material
Kontaktmaterial
Copper alloy
Kupfer-Legierung
Machined, copper alloy, 0.3 µm (11 microinches) Au over Ni,
termination area tin plated
Contacts
gedreht, Kupferlegierung, 0,3 µm Au über Nickel,
Kontakte
Anschlussbereich verzinnt
Waterproofing elements
Silicone
Dichtelement
Silikon
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
31
DS 10/2007
Waterproof Connectors with Metal Watertight Frame
Wasserdichte Steckverbinder mit Metalldichtrahmen
Connectors with Solder Pot Termination, Front Mounting
Steckverbinder mit Löttopfanschluss, frontseitige Montage
Watertight frame for fixing on the front side of the mounting plate
Dichtrahmen zur Befestigung auf der Frontseite der Montageplatte
Front panel
Frontplatte
O-ring
O-Ring
B
Inner thread 4-40 UNC or M3, ca. 3.5mm (0.138") deep
Innengewinde 4-40 UNC oder M3, ca. 3.5mm tief
A
Connectors with Solder Pot Termination, max. AWG 22
Steckverbinder mit Löttopfanschluss, max. AWG 22
Number of Contacts
A
±0,2
B
±0,1
C
±0,2
Order number pin
Bestellnummer Stift
Order Number Socket
Bestellnummer Buchse
Inner Thread
Innengewinde
4-40 UNC
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Polzahl
(±0.008) (±0.004) (±0.008)
M3
*
40,0
(1.575)
48,3
(1.902)
62,0
(2.441)
78,5
(3.091)
76,1
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
21,0
(0.827)
21,0
(0.827)
21,00
(0.827)
21,0
(0.827)
23,2
(0.913)
9-15
FWDFM09-15P-K1444*
FWDFM09-15S-K1444
15-26
25-44
37-62
50-78
FWDFM15-26P-K1444* FWDFM15-26S-K1444*
FWDFM25-44P-K1444* FWDFM25-44S-K1444*
FWDFM37-62P-K1444* FWDFM37-62S-K1444*
FWDFM50-78P-K1444* FWDFM50-78S-K1444*
*
*
*
*
Standard
Standard
Standard
(2.996)
* and Modification K1444 on request
* und Modifikation K1444 auf Anfrage
Connectors with Solder Pot Termination, Rear Mounting
Steckverbinder mit Löttopfanschluss, rückseitige Montage
Waterlight frame for fixing on the rear side of the mounting plate
Dichtrahmen zur Befestigung auf Rückseite der Montageplatte
Front panel
Frontplatte
O-ring
O-Ring
B
A
Inner thread 4-40 UNC or M3, ca. 3.5mm (0.138") deep
Innengewinde 4-40 UNC oder M3, ca. 3.5mm tief
Connectors with Solder Pot Termination, max. AWG 22
Steckverbinder mit Löttopfanschluss, max. AWG 22
Number of Contacts
A
±0,2
B
±0,1
C
±0,2
Order Number Pin
Bestellnummer Stift
Order Number Socket
Bestellnummer Buchse
Inner Thread
Innengewinde
4-40 UNC
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Polzahl
(±0.008) (±0.004) (±0.008)
M3
*
40,0
(1.575)
48,3
(1.902)
62,0
(2.441)
78,5
(3.091)
76,1
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
21,0
(0.827)
21,0
(0.827)
21,00
(0.827)
21,0
(0.827)
23,2
(0.913)
9-15
FWDRM9-15P-K1444*
FWDRM9-15S-K1444
15-26
25-44
37-62
50-78
FWDRM15-26P-K1444* FWDRM15-26S-K1444*
FWDRM25-44P-K1444* FWDRM25-44S-K1444*
FWDRM37-62P-K1444* FWDRM37-62S-K1444*
FWDRM50-78P-K1444* FWDRM50-78S-K1444*
*
*
*
*
Standard
Standard
Standard
(2.996)
* and Modification K1444 on request
* und Modifikation K1444 auf Anfrage
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
32
DS 10/2007
Waterproof Connectors with Metal Watertight Frame
Wasserdichte Steckverbinder mit Metalldichtrahmen
Connectors with Straight PCB Termination
Steckverbinder mit geradem Leiterplattenanschluss
Watertight frame for fixing on the rear side of the mounting plate
Dichtrahmen zur Befestigung auf der Rückseite der Montageplatte
Snap-in bolts to fit PCB 1.6mm (0.063"); PCB drilling ø3.0mm ±0.1 (ø0.118" ±0.04")
Schnappbolzen, für PCB 1.6mm; Leiterplattenbohrung ø3.0mm ±0.1
Front panel
Frontplatte
O-ring
O-Ring
B
Inner thread 4-40 UNC or M3, ca. 3.5mm (0.138") deep
A
Innengewinde 4-40 UNC oder M3, ca. 3.5mm tief
Connectors with Straight PCB Termination, Ø 0.6 mm (Ø 0.024"), Pre-tinned
Steckverbinder mit geradem Einlötanschluss, Ø 0,6 mm, vorverzinnt
Number of Contacts
A
±0,2
B
±0,1
C
±0,2
Order Number Pin
Bestellnummer Stift Bestellnummer Buchse
Order Number Socket
Inner Thread
Innengewinde
4-40 UNC
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Polzahl
(±0.008) (±0.004) (±0.008)
M3
*
40,0
(1.575)
48,3
(1.902)
62,0
(2.441)
78,5
(3.091)
76,1
25,0
(0.984)
33,3
(1.311)
47,04
(1.852)
63,5
(2.500)
61,1
(2.406)
21,0
(0.827)
21,0
(0.827)
21,00
(0.827)
21,0
(0.827)
23,2
(0.913)
9-15
FWDRM9-15P1-K1676* FWDRM9-15S1-K1676*
FWDRM15-26P1-K1676*FWDRM15-26S1-K1676*
FWDRM25-44P1-K1676*FWDRM25-44S1-K1676*
FWDRM37-62P1-K1676*FWDRM37-62S1-K1676*
FWDRM50-78P1-K1676*FWDRM50-78S1-K1676*
15-26
25-44
37-62
50-78
*
*
*
*
Standard
Standard
Standard
(2.996)
* and Modification K1676 on request
* und Modifikation K1676 auf Anfrage
PCB hole pattern:
see page 10-11
Leiterplattenlochbilder: siehe Seite 10-11
Ordering Data (Waterproof D-Sub Connectors for FWH Hoods)
Bestelldaten (wasserdichte D-Sub Steckverbinder für Hauben FWH)
Pin Connector
Socket Connector
Stiftsteckverbinder
Buchsensteckverbinder
Order Number
Shell Size
Number of Contacts
Order Number
Shell Size
Number of Contacts
Bestellnummer Gehäusegröße
Polzahl
Bestellnummer Gehäusegröße
Polzahl
CT09-15P-2429
CT15-26P-2429
CT25-44P-2429
CT37-62P-2429
CT50-78P-2429
1
2
3
4
5
9-15
15-26
25-44
37-62
50-78
CT09-15S-2429
CT15-26S-2429
CT25-44S-2429
CT37-62S-2429
CT50-78S-2429
1
2
3
4
5
9-15
15-26
25-44
37-62
50-78
Packing Unit
Verpackungseinheit
Information / Information:
For information on FWH hoods, please
refer to our hoods catalogue.
Informationen zur Haube FWH entneh-
men Sie bitte unserem Haubenkatalog.
D-Sub pin and socket connectors for
waterproof hoods are only available
for solder pot terminations.
Die D-Sub Stift- und Buchsensteckver-
binder für wasserdichte Hauben sind
nur mit Löttopfanschluss verfügbar.
Modification on request
Modifikation auf Anfrage
2 locking screws
2 St. Verriegelungsschrauben
2 washers
1 front seal
2 St. Unterlegscheiben
1 St. Frontdichtung
2 distance bolts
2 St. Abstandsbolzen
ALL DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE
33
DS 10/2007
Front Mounting
Frontseitige Montage
Illustration:
Mounting on the outer side of a machine with type
FWDFM09-15P (please also see page 14).
Abbildung:
Montage auf der Geräteaußenseite bei Typ
FWDFM09-15P (siehe auch Seite 14).
O-ring glued to frame
O-Ring mit Dichtrahmen verklebt
Metal watertight frame FWDFM
Metalldichtrahmen FWDFM
Rear Mounting
Rückseitige Montage
Illustration and drawing:
Metal watertight frame FWDRM
Metalldichtrahmen FWDRM
Mounting on the inside of a machine with type
FWDRM09-15P (please also see page 14).
Abbildung und Zeichnung:
Montage auf der Geräteinnenseite bei Typ
FWDRM09-15P (siehe auch Seite 14).
O-ring glued onto frame
O-Ring am Dichtrahmen verklebt
Distance Bolts Available
Lieferbare Abstandsbolzen
Front panel
Frontplatte
Inner and Outer Thread
Order Number
Bestellnummer
F-GSCH1/5-K834
F-GSCH1/5-K835
Innen- und Außengewinde
Spacer
(for shell thickness 1.5 mm (0.059“) with thinner
front panel, washers are required, which are
included in the delivery.)
M3
4-40 UNC
Abstandsbolzen (für Gehäusewandstärke 1,5 mm, bei geringerer
Stärke sind Unterlegscheiben notwendig, die im
Lieferumfang enthalten sind.)
Accessories for Pin Connectors
Zubehör für Stiftsteckverbinder
Front Seal
Frontdichtung
Order Number
Shell Size
Number of Contacts
Bestellnummer Gehäusegröße
Polzahl
F1043-1F
F1043-2F
F1043-3F
F1043-4F
F1043-5F
1
2
3
4
5
9-15
15-26
25-44
37-62
50-78
Material Specification
Materialbeschreibung
Material
Material
Thickness
Dicke
Silicone
Silikon
1,1
(0.04)
Front seals are used to seal off the connection area of the signal contacts (combination FWD... with High Density D-Sub connectors ...-2429) and are
mounted in male connectors (see drawing). They can also be used with standard D-Sub connectors.
Frontdichtungen dienen zur Abdichtung des Steckbereiches der Signalkontakte (Kombination FWD... mit High Density D-Sub Steckverbindern ...-2429) und
werden im Stiftstecker montiert (siehe Zeichnung). Sie sind auch mit Standard D-Sub Steckverbindern verwendbar.
TECHNISCHE ÄNDERUNGEN VORBEHALTEN – MAßE IN MILLIMETER (INCHES IN KLAMMERN)
34
DS 10/2007
相关型号:
©2020 ICPDF网 联系我们和版权申明