T1100S [MORNSUN]

PASSIVE SIGNAL AMPLIFIER; 无源信号放大器


型号：	T1100S
厂家：	MORNSUN SCIENCE& TECHNOLOGY LTD.
描述：	PASSIVE SIGNAL AMPLIFIER 无源信号放大器放大器
文件：	总2页 (文件大小：80K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PASSIVE SIGNAL AMPLIFIER Iin&Iout

T1100RN/RS/N/S

DESCRIPTION

PRODUCT PROGRAM

T1100 series, a standard analog amplifier,

with anterior circuit 4-20mA current signal input

and posterior 4-20mA current signal output ,is a

passive signal isolation module .the series

adopt magneto design and high efficiency loop

electric-larceny technology ,efficiently reducing

the reliance of current signal isolation on the

power ,realize 4-20mA standard signal isolation

with high accuracy and line regulation. Besides,

the modules have extremely low temperature

drift (no more than 35ppm/℃ under -25°C to

+71 °C) .The isolation voltage between the input

and output can up to 3KVDC.

Part

Number

Power

Supply

Isolation

Power Output

Input

Output

Channels

Package

T1100RN

T1100RS

T1100N

T1100S

None

4-20mA

None

DIP16

SOIC16

DIP16

SOIC16

ELECTRICAL CHARACTERISTICS

Power Supply

None

Power Supply Data

Power Dissipation None

Power Protection

Input Signal

Input Impedance

Overload

None

4 -20mA

Voltage Drop≤250mV(At input signal=20mA)

≤300mA

FEATURES

● Two-port isolation（Between input and output）

Input Data

● High accuracy (0.1% F.S.)

Voltage Drop

Output Signal

Load

<3V(20mA)

● High linearity (0.1% F.S.)

4 -20mA

● Isolation voltage(3000VDC/60S)

● Low voltage-drop(At 20mA<3V)

● High frequency response(15KHz)

● Extremely low temperature(35PPM/°C)

● Industry standard(Operating Temperature

Range:-25°C to 71°C)

Output Data

≤300Ω（At output Signal=20mA）

＜0.05% meas.val./100Ω

Load Regulation

TRANSMISSION CHARACTERISTICS

Offset

0.1%F.S.

● High reliability(MTBF＞500,000 hours)

Gain Error

Temperature Drift

0.1%F.S.

0.0035%F.S./°C(-25°C to +71°C)

ISOLATION CHARACTERISTICS

Galvanic Isolation

Two-port isolation（Between input and output）

3KVDC (Tested for 1minute and 1mA max, humidity < 70%)

1000MΩ,500VDC（Between input and output）

MODEL SELECTION

Isolation Voltage

Insulation Resistance

OTHER CHARACTERISTICS

Operation temperature:-25 to +71°C

Ambient

temperature

Transport and Storage temperature:-50 to +105°C

Package

Weight

DIP16/SOIC16

About 8g

Application

Environment

No dusts, gases of fiercely vibration, impulsion or gases that may

erode to the components surrounded

MORNSUN Science & Technology co.,Ltd.

Address: 2th floor 6th building, Huangzhou Industrial

District, Guangzhou, China

Tel: 86-20-38601850

Fax:86-20-38601272

Note:

1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load

unless otherwise specified.

2. Only typical models listed, specifications of custom product may be different. Please contact our

service people directly for certain conditions.

Http://www.mornsun-power.com

The copyright and authority for the interpretation of the products are reserved by Mornsun

Specifications subject to change without notice.

T1100RN/RS/N/S A/3-2008 Page 1 of 2

SCHEMATIC DIAGRAM

APPLICATION NOTE

1. Please read instruction book carefully before

using the product. If you have any question,

please contact with our technical support.

2. Please don’t install in the dangerous zone.

3. Don’t divide the product privately in case the

equipments ineffective or go wrong.

Iout+

Iout-

Iin-

Signal input

Signal output

Iin+

AFTER SERVICE

1. Products are carefully inspected and controlled

before going out from our factory. If they

operated abnormally or there were anything

wrong in the inner parts, please contact with our

agents near you or technical support in our

company as soon as possible.

APPLICATION CIRCUIT DIAGRAM

2. 3 years warranty since the delivery date. During

the period of quality guarantee，our company

will repair or change free of charge if product

has any quality problem in the process of

normally using.

APPLICATION CIRCUITS

See

GUIDE

INSTRUMENTATION

OUTPUT

ISOLATION AMPLIFIERS for more detail.

PACKAGING SIZE AND TERMINAL DESCRIPTION

First Angle Projection

T1100RN/N DIP16 Package

23.80(0.937)

T1100RS/S SOIC16 Package

23.80(0.937)

7.50(0.295)

4.0

0.70(0.028)

2.54

0.50

0.020

(0.100)

0.50

0.020

23.80(0.937)

RECOMMENDED FOOTPRINT

Top view,grid:2.54*2.54mm(0.1*0.1inch)

diameter:1.00mm(0.039inch)

0.70(0.028)

0.30

(0.012)

1.15±0.15

0.045±0.006

161514

10 9

161514

10 9

2.00

0.079

7 8

1.00

0.039

Pin Connection

FUNCTION

Output-

Output+

Input+

Note:

Unit:mm(inch)

Pin section:0.50*0.30mm(0.020*0.012inch)

Pin section tolerances:±0.10mm(±0.004inch)

General tolerances:±0.25mm(±0.010inch)

Input-

Others

NC:No Connection

The copyright and authority for the interpretation of the products are reserved by Mornsun

Specifications subject to change without notice.

T1100RN/RS/N/S A/3-2008 Page 2 of 2

相关型号：