URF2415LP-10WR3 [MORNSUN]
DC/DC Converter;型号: | URF2415LP-10WR3 |
厂家: | MORNSUN SCIENCE& TECHNOLOGY LTD. |
描述: | DC/DC Converter |
文件: | 总6页 (文件大小:2203K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converter
URF_LP-10WR3 Series
10W,Ultra wide input isolated & regulated
DC-DC converter
FEATURES
Wide range of input voltage (4:1)
Efficiency up to 87%
No-load power consumption as low as 0.12W
Isolation voltage :3K VDC
Input
under-voltage
protection,
output
over-voltage protection, short circuit protection,
output over-current protection
Operating temperature range: -40℃ to +85℃
Meet CISPR22/EN55022 CLASS A
A2S (wring mounting) and A4S (TS35 rail mounting)
products featuring anti-reverse connection for
input
IEC60950, UL60950, EN60950 Approval
International standard pin-out
CB
Patent Protection RoHS
URF_LP-10WR3 series are isolated 10W DC-DC products with 4:1 input voltage. They feature efficiency up to 87%, 1500VDC isolation,
operating temperature of -40 ℃ ~+85 ℃ , Input under-voltage protection, output short circuit protection, over-voltage protection,
over-current protection and EMI meets CISPR22/EN55022 CLASS A, which make them widely applied in industrial control, electric power,
instruments and communication fields. And extension package A2S and A4S also enable them with reverse voltage protection.
Selection Guide
Input Voltage (VDC)
Output
Output Current (mA)
Efficiency
(%,Typ.)
Max. Capacitive
Load(µF)
①
③
Part No.
Certification
Nominal
(Range)
Output Voltage
(VDC)
②
Max.
@ Full Load
77/79
80/82
83/85
84/86
85/87
85/87
77/79
80/82
84/86
85/87
85/87
(Max./Min.)
2400/0
2000/0
1111/0
833/0
URF2403LP-10WR3
URF2405LP-10WR3
URF2409LP-10WR3
URF2412LP-10WR3
URF2415LP-10WR3
URF2424LP-10WR3
URF4803LP-10WR3
URF4805LP-10WR3
URF4812LP-10WR3
URF4815LP-10WR3
URF4824LP-10WR3
3.3
5
5400
5400
680
9
24
40
(9-36)
12
15
24
3.3
5
470
667/0
330
UL/CE/CB
416/0
100
2400/0
2000/0
833/0
5400
5400
470
48
80
12
15
24
(18-75)
667/0
330
416/0
100
Notes:
①Part No. with suffix of “A2S” means chassis mounting and suffix of “A4S” means DIN-Rail mounting (e.g. URF2405LP-10WR3A2S means chassis mounting;
URF2405LP-10WR3A4S means DIN-Rail mounting);
②Absolute maximum rating without damage on the converter, but it isn't recommended;
③Efficiency is measured In nominal input voltage and rated output load;A2S (wiring) and A4S (rail) Model due to input reverse polarity protection, minimum
efficiency greater than Min.-2 is qualified.
Input Specifications
Item
Operating Conditions
24VDC input
Min.
--
Typ.
508/5
254/4
40
Max.
521/12
261/12
--
Unit
mA
Input Current (full load / no-load)
48VDC input
--
24VDC input
--
Reflected Ripple Current
Input impulse Voltage (1sec. max.)
Starting Voltage
48VDC input
--
30
--
24VDC input
-0.7
-0.7
--
--
50
48VDC input
--
100
9
VDC
24VDC input
--
48VDC input
--
--
18
2015.08.12-A/2
Page 1 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_LP-10WR3 Series
24VDC input
6.5
15.5
10
5.5
14.0
--
--
--
--
Input under-voltage Protection
VDC
ms
48VDC input
Starting Time
Input Filter
Hot Plug
Nominal input& constant resistance load
Pi filter
Unavailable
Module switch on
Ctrl suspended or connected to TTL high level (3.5-12VDC)
Ctrl pin connected to GND or low level (0-1.2VDC)
Ctrl*
Module switch off
Input current when switched off
--
5
8
mA
Note: * the voltage of Ctrl pin is relative to input pin GND.
Output Specifications
Item
Operating Conditions
Min.
--
Typ.
±1
Max.
Unit
Output Voltage Accuracy
±3
Full load, the input voltage is from low voltage to
high voltage
Line Regulation
--
±0.2
±0.5
%
Load Regulation
0%-100% load
--
--
±0.5
300
±3
±1
500
±5
Transient Recovery Time
Transient Response Deviation
Temperature Drift Coefficient
Ripple&Noise*
µs
%
25% load step change
--
Full load
--
--
±0.03
120
160
190
%/°C
mV p-p
%Vo
%Io
20MHz bandwidth, 5%-100% load
--
50
Over-voltage Protection
Over-current Protection
Short circuit Protection
110
110
130
140
Input voltage range
Continuous, self-recovery
Note: *Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation.
0%-5% load ripple&Noise is no more than 5%Vo.
General Specifications
Item
Operating Conditions
Min.
Typ.
--
Max.
--
Unit
Input-output, with the test time of 1 minute and the
leak current lower than 1mA
Insulation Voltage
3000
VDC
Insulation Resistance
Isolation Capacitance
Operating Temperature
Storage Temperature
Storage Humidity
Input-output, insulation voltage 500VDC
Input-output, 100KHz/0.1V
1000
--
--
--
--
MΩ
500
pF
Derating if the temperature is ≥71°C (see Fig. 1)
-40
-55
5
--
--
+85
+125
95
°C
Non-condensing
--
%RH
Welding spot is 1.5mm away from the casing, 10
seconds
Lead Temperature
--
--
+300
°C
Vibration
10-55Hz, 10G, 30 Min. along X, Y and Z
Switching Frequency*
MTBF
PWM mode
--
350
--
--
--
KHz
MIL-HDBK-217F@25°C
1000
K hours
Note: * This series of products using reduced frequency technology, the switching frequency is test value of full load,When the load is reduced to below 50%, the
switching frequency decreases with decreasing load.
Physical Specifications
Plastic (UL94-V0)
51.50*26.50*12.00 mm
76.00*31.50*21.20 mm
76.00*31.50*25.80 mm
24.00g/46.00g/66.00g (Typ.)
Casing Material
Horizontal package
A2S wiring package
Package Dimensions
A4S rail package
Horizontal package/A2S wiring package/A4S rail package
Weight
Free air convection
Cooling method
2015.08.12-A/2
Page 2 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_LP-10WR3 Series
EMC Specifications
CISPR22/EN55022 CLASS A (Bare component)/ CLASS B (see Fig.3-② for recommended circuit)
CISPR22/EN55022 CLASS A (Bare component)/ CLASS B (see Fig.3-② for recommended circuit)
CE
EMI
RE
ESD
RS
IEC/EN61000-4-2 Contact ±4KV
perf. Criteria B
perf. Criteria A
perf. Criteria B
perf. Criteria B
perf. Criteria A
IEC/EN61000-4-3 10V/m
IEC/EN61000-4-4 ±2KV (see Fig.3-① for recommended circuit)
IEC/EN61000-4-5 ±2KV (see Fig.3-①for recommended circuit)
IEC/EN61000-4-6 3 Vr.m.s
EFT
Surge
EMS
CS
Voltage
dips,
short
interruptions and voltage IEC/EN61000-4-29 0-70%
variations immunity
perf. Criteria B
Product Characteristic Curve
Temperature Derating Curve
Safe Operating Area
120
100
80
60
40
20
0
-40
0
40
71 85
120
Operating Temperature(℃)
Fig. 1
2015.08.12-A/2
Page 3 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_LP-10WR3 Series
Design Reference
1. Typical application
All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery.
If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product.
+Vo
Vin
Cin
Cout
10µF
Cout
Cin
DC
DC
GND
10µF ~ 47µF
0V
Fig. 2
2. EMC solution-recommended circuit
24VDC input
48VDC input
CY
1
LDM1
FUSE
CY
1
LCM1
FUSE
V in
Vin
+Vo
0V
V in
Vin
+Vo
0V
+
DC/DC
LOAD
+
C0
C1
C3
DC/DC
LOAD
C0
MOV
C1
C3
C2
MOV
GND
GND
GND
GND
①
②
①
②
CY
2
CY
2
Fig. 3
Notes: Part ① in the Fig. 3 is used for EMS test and part ② for EMI filtering; selected based on needs.
Parameter description:
Model
Vin:24V
Vin:48V
FUSE
MOV
C0
Choose according to actual input current
S14K35
330µF/50V
1µF/50V
--
S14K60
330µF/100V
1µF/100V
1µF/100V
--
C1
C2
LDM1
LCM1
C3
4.7µH
--
6.8mH
Refer to the Cout in Fig.2
CY1
CY2
1nF/3KV
1nF/3KV
EMC solution-recommended circuit PCB layout
24VDC 输入
48VDC 输入
Fig. 4
Note: the min. distance of the bonding pads between input & output isolation capacitors (CY1/CY2) shall be ≥ 2mm.
3. It is not allowed to connect modules output in parallel to enlarge the power
4. For more information please find DC-DC converter application notes on www.mornsun-power.com
2015.08.12-A/2
Page 4 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_LP-10WR3 Series
Dimensions and Recommended Layout
URF_LP-10WR3A2S Dimensions
2015.08.12-A/2
Page 5 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
URF_LP-10WR3 Series
URF_LP-10WR3A4S Dimensions
Notes:
1. Packing information please refer to Product Packing Information which can be downloaded from www.mornsun-power.com. Packing
Bag Number: 58210039(DIP), 58220022(A2S/A4S package);
2. The maximum capacitive load offered were tested at nominal input voltage and full load;
3. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75% with nominal
input voltage and rated output load;
4. All index testing methods in this datasheet are based on our Company’s corporate standards;
5. The performance parameters of the product models listed in this manual are as above, but some parameters of non-standard model
products may exceed the requirements mentioned above. Please contact our technicians directly for specific information;
6. We can provide product customization service;
7. Specifications are subject to change without prior notice.
Mornsun Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801
Fax: 86-20-38601272
E-mail: info@mornsun.cn
2015.08.12-A/2
Page 6 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
相关型号:
©2020 ICPDF网 联系我们和版权申明