WRA1212ZP-3WR2 [MORNSUN]
DC/DC Converter;型号: | WRA1212ZP-3WR2 |
厂家: | MORNSUN SCIENCE& TECHNOLOGY LTD. |
描述: | DC/DC Converter |
文件: | 总6页 (文件大小:241K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converter
WRA_ZP-3WR2 & WRB_ZP-3WR2 Series
3W,wide input isolated & regulated
DC-DC converter
FEATURES
z
z
z
z
z
z
z
z
Wide range of input voltage (2:1)
DIP package
Efficiency up to 86%
1.5KVDC isolation
Short circuit protection(automatic recovery)
Operating temperature range:-40°C ~ +85°C
Meet CISPR22/EN55022 CLASS A
Meet EN60950
Patent Protection RoHS
The WRA_ZP-3WR2 & WRB_ZP-3WR2 Series are specially designed for applications where a wide range input voltage power supplies are
isolated from the input power supply in a distributed power supply system on a circuit board. For these DC-DC converters, you can reduce
the failure points of design, and save the manpower, material and time cost in developing micro power supply, and also ensure better
quality, stability, safety protection, and reliability for the end products.
These products apply to where:
1) Input voltage range ≤2:1;
2) 1.5KVDC input and output isolation;
3) Output regulated and low ripple noise is required.
In circuits such as industrial control, electric power, communication system power supply, etc.
Selection Guide
Input Voltage
Output
Max. Capacitive
(VDC)
Efficiency (%,Typ.)
@ Full Load
②
Load
(μF)
Part No.
certification
Nominal
Output Voltage
(VDC)
Output Current (mA)
(Max./Min.)
①
Max.
(Range)
WRA0505ZP-3WR2
WRA0512ZP-3WR2
WRA0515ZP-3WR2
WRB0505ZP-3WR2
WRB0512ZP-3WR2
WRB0515ZP-3WR2
WRA1205ZP-3WR2
WRA1209ZP-3WR2
WRA1212ZP-3WR2
WRA1215ZP-3WR2
WRB1203ZP-3WR2
WRB1205ZP-3WR2
WRB1212ZP-3WR2
WRB1215ZP-3WR2
WRB1224ZP-3WR2
WRA2405ZP-3WR2
WRA2412ZP-3WR2
WRA2415ZP-3WR2
WRB2403ZP-3WR2
WRB2405ZP-3WR2
WRB2412ZP-3WR2
WRB2415ZP-3WR2
WRB2424ZP-3WR2
±5
±12
±15
5
±300/±15
±125/±6
±100/±5
600/30
250/12
200/10
±300/±15
±166/±8
±125/±6
±100/±5
909/46
600/30
250/12
200/10
125/6
76
78
78
74
77
77
81
84
84
85
74
81
83
82
83
82
84
84
78
81
86
86
85
2200
1800
1000
4700
2700
2200
2200
2000
1800
1000
4700
4700
2700
2200
1800
2200
1800
1000
4700
4700
2700
2200
1800
5
11
(4.5-9)
12
15
±5
±9
±12
±15
3.3
5
--
12
(9-18)
20
12
15
24
±5
±12
±15
3.3
5
±300/±15
±125/±6
±100/±5
909/46
600/30
250/12
200/10
125/6
24
(18-36)
40
CE
--
12
15
24
2014.04.14-A/3
Page 1 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
WRA_ZP-3WR2 & WRB_ZP-3WR2 Series
WRA4805ZP-3WR2
WRA4812ZP-3WR2
WRA4815ZP-3WR2
WRB4803ZP-3WR2
WRB4805ZP-3WR2
WRB4812ZP-3WR2
WRB4815ZP-3WR2
±5
±12
±15
3.3
5
±300/±15
±125/±6
±100/±5
909/46
82
84
85
76
82
86
86
2200
1800
1000
4700
4700
2700
2200
48
(36-75)
80
--
600/30
12
250/12
15
200/10
Note:
①. Absolute maximum rating without damage on the converter, but it isn't recommended;
②. For dual output converter, the given value is the same for each output.
Input Specifications
Item
Operating Conditions
5VDC input
Min.
--
Typ.
Max.
Unit
mA
811/40
309/30
155/15
77/5
20
12VDC input
24VDC input
48VDC input
5VDC input
Input Current (full load /no-load)
--
12VDC input
24VDC input
48VDC input
5VDC input
30
Reflected Ripple Current
--
--
30
30
--
12
25
12VDC input
24VDC input
48VDC input
--
Input impulse Voltage (1sec. max.)
-0.7
--
--
50
--
100
VDC
5VDC input
--
4.5
12VDC input
24VDC input
48VDC input
--
--
--
--
--
--
9
Starting Voltage
Input Filter
18
36
Pi filter
Output Specifications
Item
Operating Conditions
Min.
Typ.
Max.
Unit
%
Output Voltage Accuracy
--
--
--
±1
±3
±5
±1
No load output Voltage Accuracy Input voltage range
±1.5
±0.5
Balance of Output Voltage
Linear Regulation
Dual output, balanced load
Full load, the input voltage is from low voltage to
high voltage
--
±0.2
±0.5
Load Regulation
5%-100% load
--
--
--
--
--
±0.2
0.5
±0.5
2
Transient Recovery Time
Transient Response Deviation
Temperature Coefficient
Ripple&Noise*
ms
%
25% load step change
±2
±5
Full load
±0.02
50
±0.03
80
%/°C
mV p-p
20MHz bandwidth
Input voltage range
Short circuit Protection
Continuous, self-recovery
Note: * Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation.
General Specifications
Item
Operating Conditions
Min.
1500
1000
Typ.
--
Max.
Unit
VDC
MΩ
Input-output, with the test time of 1 minute and the
leak current lower than 1mA
Insulation Voltage
Insulation Resistance
--
--
Input-output, isolation voltage 500VDC
--
2014.04.14-A/3
Page 2 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
WRA_ZP-3WR2 & WRB_ZP-3WR2 Series
Isolation Capacitance
Operating Temperature
Storage Temperature
Casing Temperature Rise
Input-output, 100KHz/0.1V
--
-40
-55
--
120
--
--
85
125
--
pF
Derating if the temperature is ≥85°C (see Fig. 1)
--
℃
Ta=25℃
25
Welding spot is 1.5mm away from the casing, 10
seconds
Hand Soldering
--
--
--
--
300
95
Storage Humidity
Non-condensing
%
Switching Frequency(PFM
mode)
100% load, nominal input voltage
--
200
--
--
--
KHz
MTBF
MIL-HDBK-217F@25°C
1000
K hours
Physical Specifications
Casing Material
Dimensions
Weight
Aluminum Alloy
32.00*20.00*10.80 mm
14g(Typ.)
Cooling
Free convection
EMC Specifications
Conducted emission
EMI
CISPR22/EN55022 CLASS A(Bare component) CLASS B (see Fig.3-② for recommended circuit)
CISPR22/EN55022 CLASS A(Bare component) CLASS B (see Fig.3-
② for recommended circuit)
Radiated emission
Electrostatic discharge
Radiation immunity
EFT
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
Contact ±4KV/ Air ±8KV
10V/m
perf. Criteria B
perf. Criteria A
±2KV (see Fig.3-① for recommended circuit)
perf. Criteria B
EMS
±2KV (see Fig.3-
3 Vr.m.s
①for recommended circuit)
perf. Criteria B
Surge immunity
Conducted disturbance immunity IEC/EN61000-4-6
Immunities of voltage dip,
drop and short interruption
perf. Criteria A
IEC/EN61000-4-29 0-70%
perf. Criteria B
Product Characteristic Curve
Temperature Derating Cu rve
Safe Operation Area
120
100
80
60
40
20
0
105 120
85
-40
0
40
℃
Environment Temperature.(
)
Fig. 1
EfficiencyVs Output Load(Vin=Vin-nominal)
100
Efficiency Vs input Voltage(Full Load)
100
95
90
85
80
75
70
65
60
55
50
90
80
70
60
50
40
30
20
WRA2415ZP-
3WR2
WRA2415ZP-
3WR2
10 20 30 40 50 60 70 80 90 100
Output Current Percentage(%)
18
21
24
27
30
33
36
Input Voltage(V)
2014.04.14-A/3
Page 3 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
WRA_ZP-3WR2 & WRB_ZP-3WR2 Series
EfficiencyVs input Voltage(Full Load)
Efficiency Vs Output Load(Vin=Vin-nominal)
100
100
95
90
90
80
70
60
50
40
30
20
WRB2405ZP-
3WR2
85
80
75
70
65
60
55
50
WRB2405ZP-
3WR2
10 20 30 40 50 60 70 80 90 100
Output Current Percentage(%)
18
21
24
27
30
33
36
Input Voltage(V)
Design Reference
1. Output load requirements
To ensure that the module can work efficiently and reliably, its output min. load shall be no lower than 5% of the rated load when using, or
the output ripple may increase rapidly. Ensure that the product working load must be higher than 5% of the rated load.
2. Typical application
All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery.
If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product.
Dual
Vin
+Vo
0V
Cout
Cout
Cin
DC DC
Vin
Cin
5V&12V
24V&48V
GND
-Vo
100μF
10μF~47μF
Single
Vin
Cout
10μF
+Vo
0V
Cin
Cout
DC DC
Fig. 2
GND
3. EMC solution-recommended circuit
LDM1
FUSE
Vin
Vin
+Vo
+
DC/DC
LOAD
C1
C2
C3
MOV
GND
C0
GND
-Vo
(0V)
①
②
CY1
Fig. 3
2014.04.14-A/3
Page 4 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
WRA_ZP-3WR2 & WRB_ZP-3WR2 Series
Parameter description:
Model
FUSE
MOV
C0
Vin:5V
Vin:12V
Vin:24V
Vin:48V
Slow blown fuses according to the actual input current selections of the clients
--
S14K25
1000μF
S14K35
S14K60
1000μF
330μF/50V
330μF/100V
4.7μF/100V
C1
4.7μF/50V
LDM1
C2
12μH
4.7μF/50V
4.7μF /100V
C3
10μF
CY1
1nF/2KV
Note: ①.Part ① in the Fig. 3 is used for EMS test and part ② for EMI filtering, selected based on needs.
②.If there is no recommended parameters, the model no require the external component.
EMC solution-recommended circuit PCB layout
Dual
Single
Fig. 4
Note: Note: the min. distance of the bonding pads between input grounding and output grounding shall be ≥ 2mm.
4. Input current
When the electricity is provided by the unstable power supply, please make sure that the range of the output voltage fluctuation and the
ripple voltage of the power supply do not exceed the indicators of the modules. Input current of power supply should afford the flash startup
current of this kind of DC/DC module(see Fig. 5).
Generally: Vin=5V
Vin=12V
Iave =1400mA
Iave=620mA
Iave=310mA
Iave =150mA
Vin=24V
Vin=48V
Iave
Input Voltage
scope
Input Voltage (V)
Fig. 5
5. For more information please find DC-DC converter application notes on www.mornsun-power.com
2014.04.14-A/3
Page 5 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
DC/DC Converter
WRA_ZP-3WR2 & WRB_ZP-3WR2 Series
Dimensions and Recommended Layout
Note:
1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58210008;
2. The min. load shall be no lower than 5%, or the output ripple may increase rapidly; If the product is operated under the min. required
load, the product performance cannot be guaranteed to comply with all performance indexes in the Manual, but the reliability of the
product will not be influenced;
3. The unbalance degree of the recommended dual output module load: ≤ 5%; if the degree exceeds ±5%, then the product
performances cannot be guaranteed to comply with all the performance indicators in the manual, and please directly contact our
technicians for specific information;
4. The max. capacitive load should be tested within the input voltage range and under full load conditions;
5. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25℃, humidity<75% when inputting
nominal voltage and outputting rated load;
6. All index testing methods in this datasheet are based on our Company’s corporate standards;
7. The performance indexes of the product models listed in this datasheet are as above, but some indexes of non-standard model
products will exceed the above-mentioned requirements, and please directly contact our technicians for specific information;
8. We can provide product customization service;
9. Specifications of this product are subject to changes without prior notice.
Mornsun Guangzhou Science & Technology Co., Ltd.
Address: No. 5, Kehui St. 1, Kehui Development Center, Science Ave., Guangzhou Science City, Luogang District, Guangzhou, P. R. China
Tel: 86-20-38601850-8801
Fax: 86-20-38601272
E-mail: info@mornsun.cn
2014.04.14-A/3
Page 6 of 6
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
相关型号:
©2020 ICPDF网 联系我们和版权申明