SA16ACA [MOTOROLA]

500W, BIDIRECTIONAL, SILICON, TVS DIODE;
SA16ACA
型号: SA16ACA
厂家: MOTOROLA    MOTOROLA
描述:

500W, BIDIRECTIONAL, SILICON, TVS DIODE

电视
文件: 总4页 (文件大小:41K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MOTOROLA  
SEMICONDUCTOR  
TECHNICAL DATA  
SA5.0A  
through  
SA170A  
Zener Transient Voltage Suppressors  
Unidirectional and Bidirectional  
The SA5.0A series is designed to protect voltage sensitive components from high volt-  
age, high energy transients. They have excellent clamping capability, high surge capability,  
low zener impedance and fast response time. The SA5.0A series is supplied in Motorola’s  
exclusive, cost-effective, highly reliable Surmetic axial leaded package and is ideally-suited  
for use in communication systems, numerical controls, process controls, medical equip-  
ment, business machines, power supplies and many other industrial/consumer applications.  
MOSORB  
ZENER OVERVOLTAGE  
TRANSIENT  
SUPPRESSORS  
5–170 VOLT  
Specification Features:  
500 WATT PEAK POWER  
3 WATT STEADY STATE  
Stand-off Zener Voltage Range — 5 to 170 V  
Peak Power — 500 Watts @ 1 ms  
Maximum Clamp Voltage @ Peak Pulse Current  
Low Leakage < 1 µA Above 8.5 Volts  
Maximum Temperature Coefficient Specified  
Response Time is Typically Less than 1 ns  
Mechanical Characteristics:  
CASE: Void-free, transfer-molded, thermosetting plastic  
FINISH: All external surfaces are corrosion resistant and leads are readily solderable  
POLARITY: Cathode indicated by polarity band. When operated in zener mode, will be  
positive with respect to anode  
CASE 59-04  
PLASTIC  
MOUNTING POSITION: Any  
WAFER FAB LOCATION: Phoenix, Arizona  
ASSEMBLY/TEST LOCATION: Guadalajara, Mexico  
MAXIMUM RATINGS  
Rating  
Symbol  
Value  
Unit  
Peak Power Dissipation (1)  
P
PK  
500  
Watts  
@ T 25°C  
L
Steady State Power Dissipation  
P
3
Watts  
D
@ T 75°C, Lead Length = 3/8″  
L
Derated above T = 75°C  
30  
70  
mW/°C  
L
Forward Surge Current (2)  
I
Amps  
FSM  
@ T = 25°C  
A
Operating and Storage Temperature Range  
T , T  
J stg  
– 55 to +175  
°C  
Lead Temperature not less than 1/16from the case for 10 seconds: 230°C  
NOTES: 1. Nonrepetitive current pulse per Figure 4 and derated above T = 25°C per Figure 2.  
A
NOTES: 2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.  
Devices listed in bold, italic are Motorola preferred devices.  
Motorola TVS/Zener Device Data  
500 Watt Peak Power Data Sheet  
4-1  
ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted) V = 3.5 V Max, I * = 35 A (except bidirectional devices).  
A
F
F
Maximum  
Reverse  
Surge  
Breakdown Voltage  
Working Peak  
Reverse  
Maximum  
Reverse  
Leakage  
Maximum  
Reverse Voltage  
Maximum  
Voltage  
Temperature  
Variation  
V
BR  
(Volts)  
Voltage  
@ I  
RSM  
(Clamping Voltage)  
(Volts)  
@ I  
Current I  
V
**  
@ V  
T
RSM  
(Amps)  
RWM  
RWM  
(mA)  
Device  
Min  
Max  
(Volts)  
I
R
(µA)  
V
of V  
mV/°C  
RSM  
9.2  
BR  
SA5.0A  
SA6.0A  
SA6.5A  
SA7.0A  
6.4  
7
10  
10  
10  
10  
5
6
6.5  
7
600  
54.3  
48.5  
44.7  
41.7  
5
6.67  
7.22  
7.78  
7.37  
7.98  
8.6  
600  
400  
150  
10.3  
11.2  
12  
5
5
6
SA7.5A  
SA8.0A  
SA8.5A  
8.33  
8.89  
9.44  
9.21  
9.83  
10.4  
1
1
1
7.5  
8
8.5  
50  
25  
5
38.8  
36.7  
34.7  
12.9  
13.6  
14.4  
7
7
8
SA10A  
SA11A  
SA12A  
SA13A  
11.1  
12.2  
13.3  
14.4  
12.3  
13.5  
14.7  
15.9  
1
1
1
1
10  
11  
12  
13  
1
1
1
1
29.4  
27.4  
25.1  
23.2  
17  
10  
11  
12  
13  
18.2  
19.9  
21.5  
SA14A  
SA15A  
SA16A  
SA17A  
15.6  
16.7  
17.8  
18.9  
17.2  
18.5  
19.7  
20.9  
1
1
1
1
14  
15  
16  
17  
1
1
1
1
21.5  
20.6  
19.2  
18.1  
23.2  
24.4  
26  
14  
16  
17  
19  
27.6  
SA18A  
SA20A  
SA24A  
20  
22.2  
26.7  
22.1  
24.5  
29.5  
1
1
1
18  
20  
24  
1
1
1
17.2  
15.4  
12.8  
29.2  
32.4  
38.9  
20  
23  
28  
SA26A  
SA28A  
SA30A  
SA33A  
28.9  
31.1  
33.3  
36.7  
31.9  
34.4  
36.8  
40.6  
1
1
1
1
26  
28  
30  
33  
1
1
1
1
11.9  
11  
10.3  
9.4  
42.1  
45.4  
48.4  
53.3  
30  
31  
36  
39  
SA36A  
SA40A  
SA43A  
SA45A  
40  
44.4  
47.8  
50  
44.2  
49.1  
52.8  
55.3  
1
1
1
1
36  
40  
43  
45  
1
1
1
1
8.6  
7.8  
7.2  
6.9  
58.1  
64.5  
69.4  
72.7  
41  
46  
50  
52  
SA48A  
SA51A  
SA58A  
53.3  
56.7  
64.4  
58.9  
62.7  
71.2  
1
1
1
48  
51  
58  
1
1
1
6.5  
6.1  
5.3  
77.4  
82.4  
93.6  
56  
61  
70  
SA60A  
SA64A  
SA70A  
66.7  
71.1  
77.8  
73.7  
78.6  
86  
1
1
1
60  
64  
70  
1
1
1
5.2  
4.9  
4.4  
96.8  
103  
113  
71  
76  
85  
SA78A  
86.7  
100  
111  
133  
144  
167  
95.8  
111  
123  
147  
159  
185  
1
1
1
1
1
1
78  
90  
100  
120  
130  
150  
1
1
1
1
1
1
4
126  
146  
162  
193  
209  
243  
95  
SA90A  
SA100A  
SA120A  
SA130A  
SA150A  
3.4  
3.1  
2.5  
2.4  
2.1  
110  
123  
146  
158  
184  
SA160A  
SA170A  
178  
189  
197  
209  
1
1
160  
170  
1
1
1.9  
1.8  
259  
275  
196  
208  
** 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.  
** MOSORB transient suppressors are normally selected according to the maximum reverse stand-off voltage (V  
***operating voltage level.  
(continued)  
), which should be equal to or greater than the dc or continuous peak  
RWM  
Surge current waveform per Figure 4 and derate per Figure 2.  
V
measured at pulse test current I at an ambient temperature of 25°C.  
T
BR  
FOR BIDIRECTIONAL APPLICATIONS  
Preferred Bidirectional Devices —  
USE CA SUFFIX for SA6.0CA through SA170CA  
Electrical characteristics apply in both directions.  
SA6.5CA  
SA12CA  
SA13CA  
SA15CA  
SA18CA  
SA24CA  
Motorola TVS/Zener Device Data  
500 Watt Peak Power Data Sheet  
4-2  
100  
10  
NONREPETITIVE PULSE  
WAVEFORM SHOWN IN  
FIGURE 4  
100  
80  
60  
40  
1
20  
0
0.1  
0.1  
µs  
1
µs  
10  
µs  
100 µs  
1 ms  
10 ms  
0
25  
50  
75  
100  
125  
150 175  
C)  
200  
T , AMBIENT TEMPERATURE (  
°
A
t , PULSE WIDTH  
p
Figure 1. Pulse Rating Curve  
Figure 2. Pulse Derating Curve  
PULSE WIDTH (t ) IS DEFINED  
p
AS THAT POINT WHERE THE  
t
r
PEAK CURRENT DECAYS TO 50%  
10,000  
OF I  
.
s
RSM  
100  
PEAK VALUE — I  
RSM  
t
10  
µ
r
MEASURED @  
ZERO BIAS  
1000  
100  
10  
I
RSM  
2
HALF VALUE –  
50  
0
MEASURED @  
STAND-OFF  
t
P
VOLTAGE (V  
)
R
0.1  
1
10  
100  
1000  
0
1
2
t, TIME (ms)  
3
4
V
, BREAKDOWN VOLTAGE (VOLTS)  
BR  
Figure 3. Capacitance versus Breakdown Voltage  
Figure 4. Pulse Waveform  
5
4
3/8″  
3/8″  
3
2
1
0
0
25 50 75 100 125 150 175 200  
T , LEAD TEMPERATURE (  
°C)  
L
Figure 5. Steady State Power Derating  
Devices listed in bold, italic are Motorola preferred devices.  
Motorola TVS/Zener Device Data  
500 Watt Peak Power Data Sheet  
4-3  
Transient Voltage Suppressors — Axial Leaded  
500 Watt Peak Power  
B
NOTES:  
1. ALL RULES AND NOTES ASSOCIATED WITH JEDEC  
DO-41 OUTLINE SHALL APPLY.  
2. POLARITY DENOTED BY CATHODE BAND.  
3. LEAD DIAMETER NOT CONTROLLED WITHIN F  
DIMENSION.  
D
K
A
MILLIMETERS  
INCHES  
DIM  
A
B
D
K
MIN  
5.97  
2.79  
0.76  
27.94  
MAX  
6.60  
3.05  
0.86  
MIN  
MAX  
0.260  
0.120  
0.034  
0.235  
0.110  
0.030  
1.100  
K
CASE 59-04  
PLASTIC  
(Refer to Section 10 for Surface Mount, Thermal Data and Footprint Information.)  
MULTIPLE PACKAGE QUANTITY (MPQ)  
REQUIREMENTS  
Package Option  
Type No. Suffix  
MPQ (Units)  
Tape and Reel  
RL  
5K  
(Refer to Section 10 for more information on Packaging Specifications.)  
Motorola TVS/Zener Device Data  
500 Watt Peak Power Data Sheet  
4-4  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY