AWK-3131A-SSC-RTG-EU-T [MOXA]
Industrial IEEE 802.11a/b/g/n wireless AP/client;
| 型号： | AWK-3131A-SSC-RTG-EU-T |
| 厂家： | 
Moxa |
| 描述： | Industrial IEEE 802.11a/b/g/n wireless AP/client |
| 文件： | 总8页 (文件大小：1155K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AWK-3131A-RTG Series
Industrial IEEE 802.11a/b/g/n wireless AP/client
Features and Benefits
• IEEE 802.11a/b/g/n compliant
• M12 anti-vibration connectors
• SC optical fiber connection
• QoS (WMM) and VLAN for efficient network traffic
1
• Controller-based Turbo Roaming (less than 50 ms)
2
• Complies with all EN 50155 mandatory test items
• Wide-temperature models available for -40 to 75°C environments
Certifications
Introduction
The AWK-3131A-RTG 2-in-1 industrial AP/client devices are designed specifically for train-to-ground communication and can perform reliably even
when the trains reach a speed of 120 km/h. The AWK-3131A-RTG complies with a portion of EN 50155 specifications, covering operating
temperature, power input voltage, surge, ESD, and vibration, making the AWK-3131A-RTG suitable for a variety of industrial applications.
Installation is easy, with either DIN-rail mounting or distribution boxes, and the DIN-rail mounting capability, wide operating temperature range, and
IP30 housing with LED indicators make the AWK-3131A-RTG a convenient yet reliable solution for any rolling stock application.
Advanced Security
• 64-bit and 128-bit WEP (Wired Equivalent Privacy)
• Enable/disable SSID broadcasts
• WPA/WPA2 (Wi-Fi Protected Access) and 802.11i support
• IEEE802.1X/RADIUS support
• Powerful filters for access control
Designed for Train-to-Ground Applications
• Client-based Turbo Roaming handover time < 150 ms @ 3 channel with WPA2
• Controller-based Turbo Roaming handover time (available only when used with the WAC-1001 or WAC-2004) < 50 ms @ 3 channels with WPA2
• Multiple roaming parameters for different installation structures and antenna types
Specifications
WLAN Interface
WLAN Standards
802.11a/b/g/n
802.11i Wireless Security
Modulation Type
DSSS
OFDM
802.11b: CCK @ 11/5.5 Mbps
802.11b: DQPSK @ 2 Mbps
802.11b: DBPSK @ 1 Mbps
802.11a/g: 64QAM @ 54/48 Mbps
802.11a/g: 16QAM @ 36/24 Mbps
802.11a/g: QPSK @ 18/12 Mbps
802.11a/g: BPSK @ 9/6 Mbps
802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps
1.
2.
The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free
20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load.
Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
This product is suitable for rolling stock railway applications, as defined by the EN 50155 standard. For a more detailed statement, click here: www.moxa.com/
doc/specs/EN_50155_Compliance.pdf
1
www.moxa.com
Frequency Band for US (20 MHz operating channels)
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)3
5.500 to 5.700 GHz (8 channels) excluding 5.600 to 5.640 GHz4
5.745 to 5.825 GHz (5 channels)
Frequency Band for EU (20 MHz operating channels)
Frequency Band for JP (20 MHz operating channels)
Wireless Security
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)3
5.500 to 5.700 GHz (11 channels)4
2.412 to 2.484 GHz (14 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)3
5.500 to 5.700 GHz (11 channels)3
SSID broadcast enable/disable
WEP encryption (64-bit and 128-bit)
WPA/WPA2-Personal
WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
Transmission Rate
802.11b: 1 to 11 Mbps
802.11a/g: 6 to 54 Mbps
802.11n: 6.5 to 300 Mbps
Transmitter Power for 802.11a
23 1.5 dBm @ 6 to 24 Mbps
21 1.5 dBm @ 36 Mbps
20 1.5 dBm @ 48 Mbps
18 1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (5 GHz)
23 1.5 dBm @ MCS0 20 MHz
20 1.5 dBm @ MCS1 20 MHz
20 1.5 dBm @ MCS2 20 MHz
20 1.5 dBm @ MCS3 20 MHz
19 1.5 dBm @ MCS4 20 MHz
18 1.5 dBm @ MCS5 20 MHz
18 1.5 dBm @ MCS6 20 MHz
18 1.5 dBm @ MCS7 20 MHz
23 1.5 dBm @ MCS8 20 MHz
20 1.5 dBm @ MCS9 20 MHz
20 1.5 dBm @ MCS10 20 MHz
20 1.5 dBm @ MCS11 20 MHz
19 1.5 dBm @ MCS12 20 MHz
19 1.5 dBm @ MCS13 20 MHz
18 1.5 dBm @ MCS14 20 MHz
18 1.5 dBm @ MCS15 20 MHz
23 1.5 dBm @ MCS0 40 MHz
20 1.5 dBm @ MCS1 40 MHz
20 1.5 dBm @ MCS2 40 MHz
20 1.5 dBm @ MCS3 40 MHz
19 1.5 dBm @ MCS4 40 MHz
18 1.5 dBm @ MCS5 40 MHz
18 1.5 dBm @ MCS6 40 MHz
18 1.5 dBm @ MCS7 40 MHz
23 1.5 dBm @ MCS8 40 MHz
20 1.5 dBm @ MCS9 40 MHz
20 1.5 dBm @ MCS10 40 MHz
20 1.5 dBm @ MCS11 40 MHz
19 1.5 dBm @ MCS12 40 MHz
19 1.5 dBm @ MCS13 40 MHz
18 1.5 dBm @ MCS14 40 MHz
18 1.5 dBm @ MCS15 40 MHz
Transmitter Power for 802.11b
26 1.5 dBm @ 1 Mbps
26 1.5 dBm @ 2 Mbps
26 1.5 dBm @ 5.5 Mbps
25 1.5 dBm @ 11 Mbps
3.
4.
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.
However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.
However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
2
www.moxa.com
Transmitter Power for 802.11g
23 1.5 dBm @ 6 to 24 Mbps
21 1.5 dBm @ 36 Mbps
19 1.5 dBm @ 48 Mbps
18 1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (2.4 GHz)
23 1.5 dBm @ MCS0 20 MHz
21 1.5 dBm @ MCS1 20 MHz
21 1.5 dBm @ MCS2 20 MHz
21 1.5 dBm @ MCS3 20 MHz
20 1.5 dBm @ MCS4 20 MHz
19 1.5 dBm @ MCS5 20 MHz
18 1.5 dBm @ MCS6 20 MHz
18 1.5 dBm @ MCS7 20 MHz
23 1.5 dBm @ MCS8 20 MHz
21 1.5 dBm @ MCS9 20 MHz
21 1.5 dBm @ MCS10 20 MHz
21 1.5 dBm @ MCS11 20 MHz
20 1.5 dBm @ MCS12 20 MHz
19 1.5 dBm @ MCS13 20 MHz
18 1.5 dBm @ MCS14 20 MHz
18 1.5 dBm @ MCS15 20 MHz
23 1.5 dBm @ MCS0 40 MHz
20 1.5 dBm @ MCS1 40 MHz
20 1.5 dBm @ MCS2 40 MHz
20 1.5 dBm @ MCS3 40 MHz
19 1.5 dBm @ MCS4 40 MHz
19 1.5 dBm @ MCS5 40 MHz
18 1.5 dBm @ MCS6 40 MHz
17 1.5 dBm @ MCS7 40 MHz
23 1.5 dBm @ MCS8 40 MHz
20 1.5 dBm @ MCS9 40 MHz
20 1.5 dBm @ MCS10 40 MHz
20 1.5 dBm @ MCS11 40 MHz
20 1.5 dBm @ MCS12 40 MHz
19 1.5 dBm @ MCS13 40 MHz
18 1.5 dBm @ MCS14 40 MHz
17 1.5 dBm @ MCS15 40 MHz
Receiver Sensitivity for 802.11a (measured at 5.680
GHz)
Typ. -90 @ 6 Mbps
Typ. -88 @ 9 Mbps
Typ. -88 @ 12 Mbps
Typ. -85 @ 18 Mbps
Typ. -81 @ 24 Mbps
Typ. -78 @ 36 Mbps
Typ. -74 @ 48 Mbps
Typ. -74 @ 54 Mbps
Note5
Receiver Sensitivity for 802.11n (5 GHz; measured at
5.680 GHz)
Typ. -88 dBm @ MCS0 20 MHz
Typ. -85 dBm @ MCS1 20 MHz
Typ. -82 dBm @ MCS2 20 MHz
Typ. -79 dBm @ MCS3 20 MHz
Typ. -76 dBm @ MCS4 20 MHz
Typ. -71 dBm @ MCS5 20 MHz
Typ. -70 dBm @ MCS6 20 MHz
Typ. -69 dBm @ MCS7 20 MHz
Typ. -95 dBm @ MCS8 20 MHz
Typ. -91 dBm @ MCS9 20 MHz
Typ. -87 dBm @ MCS10 20 MHz
Typ. -80 dBm @ MCS11 20 MHz
Typ. -78 dBm @ MCS12 20 MHz
Typ. -74 dBm @ MCS13 20 MHz
Typ. -72 dBm @ MCS14 20 MHz
Typ. -71 dBm @ MCS15 20 MHz
Typ. -84 dBm @ MCS0 40 MHz
Typ. -81 dBm @ MCS1 40 MHz
Typ. -77 dBm @ MCS2 40 MHz
Typ. -75 dBm @ MCS3 40 MHz
Typ. -71 dBm @ MCS4 40 MHz
Typ. -67 dBm @ MCS5 40 MHz
Typ. -64 dBm @ MCS6 40 MHz
5.
Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
3
www.moxa.com
Typ. -63 dBm @ MCS7 40 MHz
Typ. -90 dBm @ MCS8 40 MHz
Typ. -85 dBm @ MCS9 40 MHz
Typ. -82 dBm @ MCS10 40 MHz
Typ. -81 dBm @ MCS11 40 MHz
Typ. -77 dBm @ MCS12 40 MHz
Typ. -73 dBm @ MCS13 40 MHz
Typ. -71 dBm @ MCS14 40 MHz
Note6
Typ. -68 dBm @ MCS15 40 MHz
Receiver Sensitivity for 802.11b (measured at 2.437
GHz)
Typ. -93 dBm @ 1 Mbps
Typ. -93 dBm @ 2 Mbps
Typ. -93 dBm @ 5.5 Mbps
Typ. -88 dBm @ 11 Mbps
Receiver Sensitivity for 802.11g (measured at 2.437
GHz)
Typ. -88 dBm @ 6 Mbps
Typ. -86 dBm @ 9 Mbps
Typ. -85 dBm @ 12 Mbps
Typ. -85 dBm @ 18 Mbps
Typ. -85 dBm @ 24 Mbps
Typ. -82 dBm @ 36 Mbps
Typ. -78 dBm @ 48 Mbps
Typ. -74 dBm @ 54 Mbps
Receiver Sensitivity for 802.11n (2.4 GHz; measured
at 2.437 GHz)
Typ. -89 dBm @ MCS0 20 MHz
Typ. -85 dBm @ MCS1 20 MHz
Typ. -85 dBm @ MCS2 20 MHz
Typ. -82 dBm @ MCS3 20 MHz
Typ. -78 dBm @ MCS4 20 MHz
Typ. -74 dBm @ MCS5 20 MHz
Typ. -72 dBm @ MCS6 20 MHz
Typ. -70 dBm @ MCS7 20 MHz
Typ. -95 dBm @ MCS8 20 MHz
Typ. -90 dBm @ MCS9 20 MHz
Typ. -87 dBm @ MCS10 20 MHz
Typ. -83 dBm @ MCS11 20 MHz
Typ. -80 dBm @ MCS12 20 MHz
Typ. -74 dBm @ MCS13 20 MHz
Typ. -71 dBm @ MCS14 20 MHz
Typ. -69 dBm @ MCS15 20 MHz
Typ. -87 dBm @ MCS0 40 MHz
Typ. -83 dBm @ MCS1 40 MHz
Typ. -83 dBm @ MCS2 40 MHz
Typ. -80 dBm @ MCS3 40 MHz
Typ. -76 dBm @ MCS4 40 MHz
Typ. -73 dBm @ MCS5 40 MHz
Typ. -69 dBm @ MCS6 40 MHz
Typ. -67 dBm @ MCS7 40 MHz
Typ. -93 dBm @ MCS8 40 MHz
Typ. -88 dBm @ MCS9 40 MHz
Typ. -85 dBm @ MCS10 40 MHz
Typ. -82 dBm @ MCS11 40 MHz
Typ. -78 dBm @ MCS12 40 MHz
Typ. -73 dBm @ MCS13 40 MHz
Typ. -69 dBm @ MCS14 40 MHz
Typ. -67 dBm @ MCS15 40 MHz
WLAN Operation Mode
Antenna Connectors
Access point, Client, Client-Router, Sniffer
QMA
Ethernet Interface
PoE Ports (10/100BaseT(X), M12 D-coded 4-pin
female connector)
1, AWK-3131A-M12-RTG only
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3af for PoE
IEEE 802.1Q for VLAN Tagging
6.
Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
4
www.moxa.com
10/100BaseT(X) Ports (M12 D-coded 4-pin female
connector)
1, 10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X
connection (AWK-3131A-M12-RTG only)
100BaseFX Ports (single-mode SC connector)
Optical Fiber
1, AWK-3131A-SSC-RTG only
100BaseFX
Wavelength
Max. TX
1310 nm
0 dBm
-5 dBm
-34 dBm
29 dB
Min. TX
RX Sensitivity
Link Budget
Typical Distance
40 km
Ethernet Software Features
Management
General: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP,
PPPoE, DHCP
AP-only: ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
Security
RADIUS
Firewall
Filter
MAC/IP Protocol/Port-based
RS-232 (RJ45-type)
Serial Interface
Console Port
LED Interface
LED Indicators
PWR1, PWR2, PoE*, FAULT, STATE, SIGNAL, CLIENT, WLAN, LAN (AWK-3131A-M12-
RTG only),100M (AWK-3131A-SSC-RTG only)
*PoE is only available for the AWK-3131A-M12-RTG
Input/Output Interface
Digital Inputs
2
+13 to +30 V for state 1
+3 to -30 V for state 0
Max. input current: 8 mA
Alarm Contact Channels
Buttons
Relay output with current carrying capacity of 1 A @ 24 VDC
Reset button
Physical Characteristics
Housing
Metal
IP Rating
Dimensions
Weight
IP30
52.9 x 151.9 x 127.4 mm (2.08 x 5.98 x 5.02 in)
850 g (1.87 lb)
Installation
DIN-rail mounting, Wall mounting (with optional kit)
Power Parameters
Input Current
AWK-3131A-M12-RTG: 0.85 A @ 12 VDC, 0.22 A @ 48 VDC
AWK-3131A-SSC-RTG: 1.0 A @ 12 VDC, 0.27 A @ 48 VDC
Input Voltage
12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
5
www.moxa.com
Power Connector
1 removable 10-contact terminal block(s)
Power Consumption
AWK-3131A-M12-RTG: Maximum 10.5 W
AWK-3131A-SSC-RTG: Maximum 13 W
Reverse Polarity Protection
Supported
Environmental Limits
Operating Temperature
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
-40 to 85°C (-40 to 185°F)
Storage Temperature (package included)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 61000-6-2/-6-4
EMI
CISPR 32, FCC Part 15B Class B
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Railway
EN 50155, EN 50121-4
EN 45545-2
Railway Fire Protection
Radio
EN 301 489-1/17, EN 300 328, EN 301 893, MIC, FCC ID SLE-WAPN008, SRRC, NCC,
IDA
Safety
UL 60950-1, IEC 60950-1, EN 60950-1 (LVD)
MTBF
Time
AWK-3131A-M12-RTG: 552,454 hrs
AWK-3131A-SSC-RTG: 528,478 hrs
Standards
Telcordia SR332
Warranty
Warranty Period
5 years
Details
See www.moxa.com/warranty
Package Contents
Device
1 x AWK-3131A-RTG wireless AP/client
Installation Kit
1 x DIN-rail kit
2 x cap, plastic, for RJ45 port
1 plastic protective cap for fiber port (AWK-3131A-SSC-RTG only)
1 x cable holder with screw
Documentation
1 x quick installation guide
1 x warranty card
6
www.moxa.com
Dimensions
AWK-3131A-M12-RTG Models
AWK-3131A-SCC-RTG Models
Ordering Information
Model Name
Band
EU
US
JP
Connector
M12
Conformal Coating
AWK-3131A-M12-RTG-EU-T
AWK-3131A-M12-RTG-US-T
AWK-3131A-M12-RTG-JP-T
AWK-3131A-M12-RTG-EU-CT-T
AWK-3131A-M12-RTG-US-CT-T
AWK-3131A-M12-RTG-JP-CT-T
AWK-3131A-SSC-RTG-EU-T
AWK-3131A-SSC-RTG-US-T
AWK-3131A-SSC-RTG-JP-T
–
–
M12
M12
–
EU
US
JP
M12
✓
✓
✓
–
M12
M12
EU
US
JP
Single-mode SC
Single-mode SC
Single-mode SC
–
–
7
www.moxa.com
Model Name
Band
EU
Connector
Conformal Coating
AWK-3131A-SSC-RTG-EU-CT-T
AWK-3131A-SSC-RTG-US-CT-T
AWK-3131A-SSC-RTG-JP-CT-T
Single-mode SC
Single-mode SC
Single-mode SC
✓
✓
✓
US
JP
Accessories (sold separately)
Wall-Mounting Kits
WK-51-01
Wall-mounting kit, 2 plates, 6 screws, 51.6 x 67 x 2 mm
© Moxa Inc. All rights reserved. Updated Aug 20, 2019.
This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of
Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.
8
www.moxa.com
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明