IOLOGIKE1211 [MOXA]

Ethernet remote I/O with 2-port Ethernet switch;


型号：	IOLOGIKE1211
厂家：	Moxa
描述：	Ethernet remote I/O with 2-port Ethernet switch
文件：	总9页 (文件大小：2339K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ioLogik E1200 Series

Ethernet remote I/O with 2-port Ethernet switch

Features and Benefits

• User-definable Modbus TCP Slave addressing

• Supports EtherNet/IP Adapter mode

• Supports RESTful API for IIoT applications

• 2-port Ethernet switch for daisy-chain topologies

• Saves time and wiring costs with peer-to-peer communications

• Active communication with MX-AOPC UA Server

• Supports SNMP v1/v2c

• Easy mass deployment and configuration with ioSearch utility

• Friendly configuration via web browser

• Simplifies I/O management with MXIO library for Windows or Linux

• Class I Division 2, ATEX Zone 2 certification

• Wide operating temperature models available for -40 to 75°C (-40 to 167°F)

environments

Certifications

Introduction

The ioLogik E1200 Series supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of

applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus

and EtherNet/IP. Moxa's Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The

ioLogik E1200 Series speaks six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP,

RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the

same time, allowing you to get your applications connected easily and effortlessly.

Daisy-Chained Ethernet I/O Connection

This industrial Ethernet remote I/O comes with two switched Ethernet ports to allow for the free flow of information downstream to another local

Ethernet device, or upstream to a control server via expandable daisy-chained Ethernet I/O arrays. Applications such as factory automation,

security and surveillance systems, and tunneled connections can make use of daisy-chained Ethernet for building multidrop I/O networks over

standard Ethernet cables. Many industrial automation users are familiar with multidrop as the configuration most typically used in fieldbus

solutions. The daisy-chain capabilities supported by ioLogik Ethernet remote I/O units not only increase the expandability and installation

possibilities for your remote I/O applications, but also lower overall costs by reducing the need for separate Ethernet switches. Daisy-chaining

devices in this way will also reduce overall labor and cabling expenses.

Requires online registration (available free of charge)

Class I Division 2 and ATEX currently do not apply to the E1213/E1213-T models.

www.moxa.com

Save Time and Wiring Costs with Peer-to-Peer Communications

In remote automation applications, the control room and sensors are

often far removed, making wiring over long distances a constant

challenge. With peer-to-peer networking, users may now map a pair

of ioLogik Series modules so that input values will be directly

transferred to output channels, greatly simplifying the wiring process

and reducing wiring costs.

User-Definable Modbus TCP Addressing for Painless Upgrading of Existing Systems

For Modbus devices that are controlled and detected by fixed

addresses, users need to spend a vast amount of time researching

and verifying initial configurations. Users need to locate each device’s

networking details, such as I/O channels or vendor-defined

addresses, to enable the initial or start address of a SCADA system or

PLC. Devices that support user-definable Modbus TCP addressing

offer greater flexibility and easier setup. Instead of worrying about

individual devices, users simply configure the function and address

map to fit their needs.

Push Technology for Events

When used with MX-AOPC UA Server, devices can use active push

communications when communicating changes in state and/or

events to a SCADA system. Unlike a polling system, when using a

push architecture for communications with a SCADA system,

messages will only be delivered when changes in state or configured

events occur, resulting in higher accuracy and lower amounts of data

that need to be transferred.

Specifications

Input/Output Interface

Analog Input Channels

ioLogik E1240 models: 8

ioLogik E1242 models: 4

Analog Output Channels

ioLogik E1241 models: 4

ioLogik E1212 models: 8

Configurable DIO Channels (by jumper)

www.moxa.com

ioLogik E1213/E1242 models: 4

Digital Input Channels

Digital Output Channels

ioLogik E1210 models: 16

ioLogik E1212/E1213 models: 8

ioLogik E1214 models: 6

ioLogik E1242 models: 4

ioLogik E1211 models: 16

ioLogik E1213 models: 4

Isolation

3k VDC or 2k Vrms

Relay Channels

RTD Channels

Thermocouple Channels

Buttons

ioLogik E1214 models: 6

ioLogik E1260 models: 6

ioLogik E1262 models: 8

Reset button

Digital Inputs

Connector

Screw-fastened Euroblock terminal

250 Hz

Counter Frequency

Digital Filtering Time Interval

Dry Contact

Software configurable

On: short to GND

Off: open

I/O Mode

DI or event counter

Points per COM

ioLogik E1210/E1212 models: 8 channels

ioLogik E1213 models: 12 channels

ioLogik E1214 models: 6 channels

ioLogik E1242 models: 4 channels

Sensor Type

Dry contact

Wet contact (NPN or PNP)

Wet Contact (DI to COM)

On: 10 to 30 VDC

Off: 0 to 3 VDC

Digital Outputs

Connector

Screw-fastened Euroblock terminal

Current Rating

ioLogik E1211/E1212/E1242 models: 200 mA per channel

ioLogik E1213 models: 500 mA per channel

I/O Mode

I/O Type

DO or pulse output

ioLogik E1211/E1212/E1242 models: Sink

ioLogik E1213 models: Source

Over-Current Protection

ioLogik E1211/E1212/E1242 models: 2.6 A per channel @ 25°C

ioLogik E1213 models: 1.5 A per channel @ 25°C

Over-Temperature Shutdown

Over-Voltage Protection

Pulse Output Frequency

175°C (typical), 150°C (min.)

35 VDC

500 Hz (max.)

www.moxa.com

Relays

Breakdown Voltage

500 VAC

Connector

Screw-fastened Euroblock terminal

Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC

100 milli-ohms (max.)

Contact Current Rating

Contact Resistance

Electrical Endurance

Initial Insulation Resistance

Mechanical Endurance

Pulse Output Frequency

Type

100,000 operations @ 5 A resistive load

1,000 mega-ohms (min.) @ 500 VDC

5,000,000 operations

0.3 Hz at rated load (max.)

Form A (N.O.) power relay

Note

Ambient humidity must be non-condensing and remain between 5 and 95%. The relays

may malfunction when operating in high condensation environments below 0°C.

Analog Inputs

Accuracy

ioLogik E1240/E1242:

0.1% FSR @ 25°C

0.3% FSR @ -10 to 60°C

ioLogik E1240-T/E1242-T:

0.1% FSR @ 25°C

0.3% FSR @ -10 to 60°C

0.5% FSR @ -40 to 75°C

Built-in Resistor for Current Input

Connector

120 ohms

Screw-fastened Euroblock terminal

Voltage/Current

I/O Mode

I/O Type

Differential

Input Impedance

Input Range

10 mega-ohms (min.)

0 to 10 VDC

0 to 20 mA

4 to 20 mA

4 to 20 mA (with burn-out detection)

Resolution

16 bits

Sampling Rate

ioLogik E1240: 12 samples/sec per module (shared between up to 8 channels)³

ioLogik E1242: 12 samples/sec per module (shared between up to 4 channels)³

Analog Outputs

Accuracy

ioLogik E1241:

0.1% FSR @ 25°C

0.3% FSR @ -10 to 60°C

ioLogik E1241-T:

0.1% FSR @ 25°C

0.3% FSR @ -40 to 75°C

Connector

Screw-fastened Euroblock terminal

Voltage Output Short-Circuit Protection

Internal Resistor

10 mA

400 ohms

If N channels are enabled, the sampling rate for each enabled channel = 12/N samples/sec.

www.moxa.com

Note: 24 V of external power required when loading exceeds 1000 ohms

Output Range

Resolution

0 to 10 VDC

4 to 20 mA

12-bit

RTDs

Accuracy

ioLogik E1260:

0.1% FSR @ 25°C

0.3% FSR @ -10 to 60°C

ioLogik E1260-T:

0.1% FSR @ 25°C

0.3% FSR @ -40 to 75°C

Connector

Screw-fastened Euroblock terminal

2- or 3-wire

Input Connection

Input Impedance

Sensor Type

625 kilo-ohms (min.)

PT1000 (-200 to 350°C)

PT50, PT100, PT200, PT500 (-200 to 850°C)

Resistance Type

Resolution

310, 620, 1250, and 2200 ohms

0.1°C or 0.1 ohms

Sampling Rate

ioLogik E1260: 12 samples/sec per module (shared between up to 6 channels)⁴

Thermocouples

Millivolt Accuracy

ioLogik E1262:

0.1% FSR @ 25°C

0.3% FSR @ -10 to 60°C

ioLogik E1262-T:

0.1% FSR @ 25°C

0.3% FSR @ -40 to 75°C

Connector

Screw-fastened Euroblock terminal

TC Accuracy

Types J, T, E, S, B: 5°C

Types K, R, N: 8°C

CJC Accuracy

0.5°C @ 25°C

1.5°C @ -40 to 75°C

Input Impedance

Millivolt Type

10 mega-ohms (min.)

19.532 mV

39.062 mV

78.126 mV

Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power

on)

Resolution

16 bits

Sampling Rate

Sensor Type

ioLogik E1262: 12 samples/sec per module (shared between up to 8 channels)⁴

J, K, T, E, R, S, B, N

If N channels are enabled, the sampling rate for each enabled channel = 12/N samples/sec.

www.moxa.com

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)

2, 1 MAC address (Ethernet bypass)

1.5 kV (built-in)

Magnetic Isolation Protection

Ethernet Software Features

Configuration Options

Web Console (HTTP), Windows Utility (ioSearch)

Industrial Protocols

Management

EtherNet/IP Adapter, Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO

Library

BOOTP, RESTful API, DHCP Client, HTTP, IPv4, TCP/IP, UDP, SNMPv1 Trap, SNMPv1/

v2c

MIB

Device Settings MIB

Access control list

Security

LED Interface

LED Indicators

Power, Ready, Port 1, Port 2

Modbus TCP

Functions Supported

1, 2, 3, 4, 5, 6, 15, 16, 23

Mode

Server (Slave)

Max. No. of Client Connections

EtherNet/IP

Mode

Adapter

Max. No. of Scanner Connections

9 (for read-only), 1 (for read/write)

Power Parameters

Power Connector

Screw-fastened Euroblock terminal

No. of Power Inputs

Input Voltage

12 to 36 VDC

Power Consumption

ioLogik E1210 Series: 110 mA @ 24 VDC

ioLogik E1211 Series: 200 mA @ 24 VDC

ioLogik E1212 Series: 155 mA @ 24 VDC

ioLogik E1213 Series: 130 mA @ 24 VDC

ioLogik E1214 Series: 188 mA @ 24 VDC

ioLogik E1240 Series: 121 mA @ 24 VDC

ioLogik E1241 Series: 194 mA @ 24 VDC

ioLogik E1242 Series: 139 mA @ 24 VDC

ioLogik E1260 Series: 110 mA @ 24 VDC

ioLogik E1262 Series: 118 mA @ 24 VDC

Physical Characteristics

Housing

Plastic

Dimensions

Weight

27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)

200 g (0.44 lb)

Installation

Wiring

DIN-rail mounting, Wall mounting

I/O cable, 16 to 26 AWG

Power cable, 12 to 24 AWG

www.moxa.com

Environmental Limits

Operating Temperature

Standard Models: -10 to 60°C (14 to 140°F)

Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

Ambient Relative Humidity

Altitude

-40 to 85°C (-40 to 185°F)

5 to 95% (non-condensing)

4000 m⁵

Standards and Certifications

EMC

EN 55032/24, EN 61000-6-2/-6-4

CISPR 32, FCC Part 15B Class A

EMI

EMS

IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV

IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV

IEC 61000-4-6 CS: 10 V

IEC 61000-4-8 PFMF

Hazardous Locations

Safety

ATEX, Class I Division 2⁶

UL 508

Shock

IEC 60068-2-27

IEC 60068-2-32

IEC 60068-2-6

Freefall

Vibration

Declaration

Green Product

RoHS, CRoHS, WEEE

MTBF

Time

ioLogik E1210 Series: 671,345 hrs

ioLogik E1211 Series: 923,027 hrs

ioLogik E1212 Series: 561,930 hrs

ioLogik E1213 Series: 715,256 hrs

ioLogik E1214 Series: 808,744 hrs

ioLogik E1240 Series: 474,053 hrs

ioLogik E1241 Series: 888,656 hrs

ioLogik E1242 Series: 502,210 hrs

ioLogik E1260 Series: 660,260 hrs

ioLogik E1262 Series: 631,418 hrs

Standards

Telcordia SR332

Warranty

Warranty Period

ioLogik E1214: 2 years⁷

ioLogik E1210/E1211/E1212/E1213/E1240/E1241/E1242/E1260/E1262: 5 years

Details

See www.moxa.com/warranty

Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

ATEX and Class I Division 2 currently do not apply to the ioLogik E1213/E1213-T models.

Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.

www.moxa.com

Package Contents

Device

1 x ioLogik E1200 Series remote I/O

Installation Kit

1 x terminal block, 8-pin, 3.81 mm

1 x terminal block, 12-pin, 3.81 mm

1 x terminal block, 3-pin, 5.00 mm

Documentation

1 x quick installation guide

1 x warranty card

Dimensions

Ordering Information

Model Name

Input/Output Interface

Digital Output Type

Operating Temp.

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

ioLogik E1210

ioLogik E1210-T

ioLogik E1211

ioLogik E1211-T

ioLogik E1212

ioLogik E1212-T

ioLogik E1213

ioLogik E1213-T

ioLogik E1214

ioLogik E1214-T

ioLogik E1240

ioLogik E1240-T

ioLogik E1241

ioLogik E1241-T

ioLogik E1242

ioLogik E1242-T

16 x DI

–

16 x DO

Sink

Source

–

16 x DO

8 x DI, 8 x DIO

8 x DI, 4 x DO, 4 x DIO

6 x DI, 6 x Relay

8 x AI

–

8 x AI

–

4 x AO

–

4 x AO

–

4 DI, 4 x DIO, 4 x AI

Sink

www.moxa.com

Model Name

Input/Output Interface

6 x RTD

Digital Output Type

Operating Temp.

-10 to 60°C

-40 to 75°C

-10 to 60°C

-40 to 75°C

ioLogik E1260

ioLogik E1260-T

ioLogik E1262

ioLogik E1262-T

–

6 x RTD

8 x TC

Accessories (sold separately)

Software

MX-AOPC UA Server

OPC UA Server software for converting fieldbus to the OPC UA standard

This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of

Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.

www.moxa.com

IOLOGIKE1211 [MOXA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E