MGATEMB3660-8-2AC [MOXA]

8 and 16-port redundant Modbus gateways;


型号：	MGATEMB3660-8-2AC
厂家：	Moxa
描述：	8 and 16-port redundant Modbus gateways
文件：	总6页 (文件大小：899K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MGate MB3660 Series

8 and 16-port redundant Modbus gateways

Features and Benefits

• Supports Auto Device Routing for easy configuration

• Supports route by TCP port or IP address for flexible deployment

• Innovative Command Learning for improving system performance

• Supports agent mode for high performance through active and parallel

polling of serial devices

• Supports Modbus serial master to Modbus serial slave communications

• 2 Ethernet ports with the same IP or dual IP addresses for network

redundancy

• microSD card for configuration backup/duplication and event logs

• Accessed by up to 256 Modbus TCP clients

• Connects up to Modbus 128 TCP servers

• RJ45 serial interface (for “-J” models)

• Serial port with 2 kV isolation protection (for “-I” models)

• Dual VDC or VAC power inputs with wide power input range

• Embedded traffic monitoring/diagnostic information for easy troubleshooting

• Status monitoring and fault protection for easy maintenance

Certifications

Introduction

The MGate MB3660 (MB3660-8 and MB3660-16) gateways are redundant Modbus gateways that convert between the Modbus TCP and Modbus

RTU/ASCII protocols. They can be accessed by up to 256 TCP master/client devices, or connect to 128 TCP slave/server devices. The MGate

MB3660 isolation model provides 2 kV isolation protection suitable for power substation applications. The MGate MB3660 gateways are designed

to easily integrate Modbus TCP and RTU/ASCII networks. The MGate MB3660 gateways offer features that make network integration easy,

customizable, and compatible with almost any Modbus network.

For large-scale Modbus deployments, MGate MB3660 gateways can effectively connect a large number of Modbus nodes to the same network.

The MB3660 Series can physically manage up to 248 serial slave nodes for 8-port models or 496 serial slave nodes for 16-port models (the Modbus

standard only defines Modbus IDs from 1 to 247). Each RS-232/422/485 serial port can be configured individually for Modbus RTU or Modbus

ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway.

High Performance with Innovative Command Learning

The MGate MB3660 gateways support two communication modes: transparent mode and agent mode. For transparent mode, the gateway

converts Modbus commands from Modbus TCP to Modbus RTU/ASCII, and vice versa, or from serial (master) to serial (slave). However, since only

one Modbus protocol request-response action can be executed at any given time, each Modbus device has to wait its turn, resulting in poorer

performance.

In order to provide better performance, the MGate MB3660 gateways are designed with an innovative Command Learning function, which can be

activated with a single mouse click. Once activated, the gateway will learn and remember the Modbus commands it receives, and once a command

has been learned, the gateway will act as though it were in agent mode, and actively send Modbus requests to the relevant Modbus devices. Since

the data is saved in a different memory space that can be accessed by the SCADA system, the SCADA system can retrieve Modbus response data

directly from the gateway’s memory, instead of waiting for the data to pass through the Modbus devices, dramatically increasing communication

performance.

Auto-Device Routing for Easy Configuration (Patented)

Moxa’s Auto-Device Routing function helps eliminate many of the problems and inconveniences encountered by engineers who need to configure

large numbers of Modbus devices. A single mouse click is all that’s required to set up a slave ID routing table and configure Modbus gateways to

www.moxa.com

automatically detect Modbus requests from a supervisory control and data acquisition (SCADA) system. By removing the need to manually create

the slave ID routing table, the Auto-Device Routing function saves engineers significant time and reduces cost.

Modbus Gateway with Power and Ethernet Redundancy

For a complicated Modbus system, redundancy is extremely important. The MGate MB3660 Modbus gateways support redundancy for both the

power input and Ethernet connection. The MGate MB3660 gateways come with dual AC or DC power inputs built in for power redundancy, and

have dual Ethernet ports (with different IPs) for network redundancy. To accommodate different types of applications, the dual Ethernet ports can

be configured in one of two ways:

• Use the same IP for both Ethernet ports. In this case, the MGate MB3660 gateway will automatically switch to the backup LAN when the main

LAN fails.

• Use different IP addresses for each of the two Ethernet ports. In this case, Modbus clients/masters can use both Ethernet ports to communicate

with Modbus RTU/ASCII slave devices at the same time.

Specifications

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)

2 IP addresses

Auto MDI/MDI-X connection

Ethernet Software Features

Industrial Protocols

Modbus TCP Client (Master), Modbus TCP Server (Slave)

Configuration Options

Management

Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console

ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP,

Telnet, UDP, NTP Client, RADIUS

MIB

RFC1213, RFC1317

NTP Client

Time Management

Serial Interface

Console Port

RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

No. of Ports

MGate MB3660-8 Series: 8

MGate MB3660-16 Series: 16

Serial Standards

Connector

RS-232/422/485 (software selectable)

MGate MB3660-8/16: DB9 male

MGate MB3660-8/16-J: RJ45

Baudrate

50 bps to 921.6 kbps

Data Bits

7, 8

Parity

None, Even, Odd, Space, Mark

1, 2

Stop Bits

Flow Control

RTS/CTS, DTR/DSR, RTS Toggle (RS-232 only)

ADDC® (automatic data direction control)

1 kilo-ohm, 150 kilo-ohms

120 ohms

RS-485 Data Direction Control

Pull High/Low Resistor for RS-485

Terminator for RS-485

Isolation

2 kV (I models)

Serial Signals

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

Tx+, Tx-, Rx+, Rx-, GND

RS-422

www.moxa.com

RS-485-2w

RS-485-4w

Data+, Data-, GND

Tx+, Tx-, Rx+, Rx-, GND

Serial Software Features

Industrial Protocols

Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave

Serial Console

Configuration Options

Modbus RTU/ASCII

Mode

Master, Slave

Functions Supported

Max. No. of Commands

Memory Size

1, 2, 3, 4, 5, 6, 15, 16, 23

256 per serial port

65535 bytes

Modbus TCP

Mode

Client (Master), Server (Slave)

Max. No. of Client Connections

Max. No. of Server Connections

Functions Supported

256

128

1, 2, 3, 4, 5, 6, 15, 16, 23

256

Max. No. of Commands

Memory Size

65535 bytes

Modbus (Transparent)

Max. No. of Client Connections

256

128

Max. No. of Server Connections

Power Parameters

Input Voltage

All models: Redundant dual inputs

AC models: 100 to 240 VAC (47 to 63 Hz)

DC models: 20 to 60 VDC (1.5 kV isolation)

No. of Power Inputs

Power Connector

Power Consumption

Terminal block (for DC models)

MGate MB3660-8-2AC: 144 mA @ 110 VAC

MGate MB3660-8-J-2AC: 111 mA @ 110 VAC

MGate MB3660-16-2AC: 178 mA @ 110 VAC

MGate MB3660-16-J-2AC: 133 mA @ 110 VAC

MGate MB3660I-8-2AC: 310 mA @ 110 VAC

MGate MB3660I-16-2AC: 310 mA @ 110 VAC

MGate MB3660-8-2DC: 312 mA @ 24 VDC

MGate MB3660-16-2DC: 390 mA @ 24 VDC

Relays

Contact Current Rating

Resistive load: 2 A @ 30 VDC

Physical Characteristics

Housing

Metal

IP Rating

IP30

Dimensions (with ears)

480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)

www.moxa.com

Dimensions (without ears)

Weight

440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)

MGate MB3660-8-2AC: 2731 g (6.02 lb)

MGate MB3660-8-2DC: 2684 g (5.92 lb)

MGate MB3660-8-J-2AC: 2600 g (5.73 lb)

MGate MB3660-16-2AC: 2830 g (6.24 lb)

MGate MB3660-16-2DC: 2780 g (6.13 lb)

MGate MB3660-16-J-2AC: 2670 g (5.89 lb)

MGate MB3660I-8-2AC: 2753 g (6.07 lb)

MGate MB3660I-16-2AC: 2820 g (6.22 lb)

Environmental Limits

Operating Temperature

0 to 60°C (32 to 140°F)

Storage Temperature (package included)

Ambient Relative Humidity

-40 to 85°C (-40 to 185°F)

5 to 95% (non-condensing)

Standards and Certifications

Safety

EN 60950-1, UL 60950-1

EN 55032/24

EMC

EMI

CISPR 32, FCC Part 15B Class A

EMS

IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV

IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV

IEC 61000-4-6 CS: 10 V

IEC 61000-4-8 PFMF

Freefall

Shock

IEC 60068-2-31

IEC 60068-2-27

Vibration

IEC 60068-2-6, IEC 60068-2-64

MTBF

Time

MGate MB3660-8-2AC: 716,647 hrs

MGate MB3660-8-2DC: 706,783 hrs

MGate MB3660-8-J-2AC: 616,505 hrs

MGate MB3660-16-2AC: 487,416 hrs

MGate MB3660-16-2DC: 482,835 hrs

MGate MB3660-16-J-2AC: 437,337 hrs

MGate MB3660I-8-2AC: 429,807 hrs

MGate MB3660I-16-2AC: 256,208 hrs

Standards

Telcordia SR332

Warranty

Warranty Period

5 years

Details

See www.moxa.com/warranty

Package Contents

Device

1 x MGate MB3660 Series gateway

1 x power cord, suitable for your region

1 x RJ45-to-DB9 console cable

1 x wall-mounting kit

Power Supply

Cable

Installation Kit

Documentation

1 x quick installation guide

1 x warranty card

www.moxa.com

Dimensions

Ordering Information

Model Name

No. of Serial Ports

Serial Connector

DB9 male

Serial Isolation

Input Voltage

MGate MB3660-8-2DC

MGate MB3660-16-2DC

MGate MB3660-8-2AC

MGate MB3660-16-2AC

MGate MB3660I-8-2AC

–

20-60 VDC (1.5 kV isolation)

100-240 VAC (47-63 Hz)

DB9 male

–

DB9 male

–

DB9 male

2 kV

www.moxa.com

Model Name

No. of Serial Ports

Serial Connector

DB9 male

RJ45

Serial Isolation

Input Voltage

MGate MB3660I-16-2AC

MGate MB3660-8-J-2AC

MGate MB3660-16-J-2AC

2 kV

100-240 VAC (47-63 Hz)

–

RJ45

Accessories (sold separately)

Cables

CBL-F9M9-150

CBL-F9M9-20

DB9 female to DB9 male serial cable, 1.5 m

DB9 female to DB9 male serial cable, 20 cm

RJ45 to DB9 female serial cable, 1.5 m

CBL-RJ45F9-150

CBL-RJ45SF9-150

RJ45 to DB9 female serial shielded cable, 1.5 m

Connectors

Mini DB9F-to-TB

DB9 female to terminal block connector

Rack-Mounting Kits

WK-45-01

Wall-mounting kit, 2 L-shaped plates, 6 screws, 45 x 57 x 2.5 mm

Power Cords

PWC-C13AU-3B-183

PWC-C13CN-3B-183

PWC-C13EU-3B-183

PWC-C13JP-3B-183

PWC-C13UK-3B-183

PWC-C13US-3B-183

CBL-PJTB-10

Power cord with Australian (AU) plug, 1.83 m

Power cord with three-prong China (CN) plug, 1.83 m

Power cord with Continental Europe (EU) plug, 1.83 m

Power cord with Japan (JP) plug, 7A/125V, 1.83 m

Power cord with United Kingdom (UK) plug, 1.83 m

Power cord with United States (US) plug, 1.83 m

Non-locking barrel plug to bare-wire cable

This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of

Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.

www.moxa.com

MGATEMB3660-8-2AC [MOXA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E