MPQ20056-AEC1 [MPS]
Low-Noise, High-PSRR, 250mA Linear Regulator AEC-Q100 Qualified;型号: | MPQ20056-AEC1 |
厂家: | MONOLITHIC POWER SYSTEMS |
描述: | Low-Noise, High-PSRR, 250mA Linear Regulator AEC-Q100 Qualified |
文件: | 总14页 (文件大小:855K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MPQ20056-AEC1
Low-Noise, High-PSRR, 250mA
Linear Regulator
AEC-Q100 Qualified
DESCRIPTION
FEATURES
•
Guaranteed Industrial/Automotive Temp.
Range Limits
The MPQ20056 is a low-dropout linear regulator
that supplies up to 250mA current with a 100mV
dropout voltage and can operate from 2.5V to
5.5V input. The output voltage is preset at 1.8V,
2.5V or 3.3V for the two different packages. An
external resistor divider can adjust the output
voltage from 0.8V to 5V.
•
•
•
•
•
•
•
•
•
•
Up to 250mA Output Current
Low 100mV Dropout at 250mA
Low 150μA Ground Current
Low Noise: 13μVRMS typical (10Hz to 100kHz)
63dB PSRR @1kHz
Stable with Ceramic Capacitor
An internal PMOS pass element allows for a low
150μA ground current, making the MPQ20056
suitable for battery-powered devices. Other
features include low-power shutdown, short-
circuit protection, and thermal protection. The
MPQ20056 is available in a 2mm×2mm 8-pin
QFN and a 5-pin TSOT23-5 packages.
Excellent Load/Line Transient Response
Current Limiting and Thermal Protection
Fixed output voltage 1.8V, 2.5V, and 3.3V.
Adjustable Output Voltage from 0.8V to 5V
Using an External Resistor Divider
Available in AEC-Q100 Qualified Grade
•
APPLICATIONS
•
•
•
•
•
Notebook Computers
Cordless Phones
Cellular Phones
Wireless Communication Equipment
Hand-Held Instruments
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
TYPICAL APPLICATION
VOUT
VIN
VIN
EN
VOUT
CIN
2.2µF
COUT
4.7µF
FB
MPQ20056
VEN
GND
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
1
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
ORDERING INFORMATION
Part Number*
MPQ20056GG-18
MPQ20056GG-18-AEC1
MPQ20056GJ-25
MPQ20056GJ-25-AEC1
MPQ20056GJ-33
MPQ20056GJ-33-AEC1
MPQ20056GG-33
Package
QFN8(2x2mm)
QFN8(2x2mm)
TSOT23-5
TSOT23-5
TSOT23-5
TSOT23-5
QFN8(2x2mm)
QFN8(2x2mm)
Top Marking
BK
BK
ALA
ALA
AFT
AFT
BV
MPQ20056GG-33-AEC1
BV
* For Tape & Reel, add suffix –Z (e.g. MPQ20056GG-18–Z)
PACKAGE REFERENCE
FN8 (2 x 2mm)
TSOT23-5
Thermal Resistance (5)
θJA θJC
ABSOLUTE MAXIMUM RATINGS (1)
QFN8 (2x2mm).......................80 ......16 ...°C/W
TSOT23-5..............................220 ....110 ..°C/W
VIN, EN, FB to GND ...................... -0.3V to +6V
OUT to GND...................... -0.5V to (VIN + 0.5V)
(2)
Notes:
Continuous Power Dissipation ..... (TA=25°C)
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ (MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ
(MAX)-TA)/θJA. Exceeding the maximum allowable power
dissipation will cause excessive die temperature, and the
regulator will go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
QFN8 (2x2mm) ...............................................1.6W
TSOT23-5 ..................................................... 0.57W
Junction Temperature……………………..150°C
Storage Temperature Range .....-65°C to 150°C
Lead Temperature (Soldering, 10sec)...........260°C
ESD SUSCEPTIBILITY(3)
HBM (Human Body Mode).......................... 2kV
MM (Machine Mode) .................................200V
Recommended Operating Conditions (4)
Supply Input Voltage...................... 2.5V to 5.5V
Enable Input Voltage ........................ 0V to 5.5V
Operating Junction Temp. (TJ). -40°C to +125°C
3) Devices
are
ESD
sensitive.
Handling
precaution
recommended.
4) The device is not guaranteed to function outside of its
operating conditions.
5) Measured on JESD51-7, 4-layer PCB.
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
2
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
ELECTRICAL CHARACTERISTICS
VIN=VOUT+0.5V or VIN=2.5V, EN=VIN, VOUT =1.8V or 3.3V. TJ=-40oC to +125oC, Typical values are at
Tj=25°C, unless otherwise specified.
Parameter
Condition
Min
Typ
Max
Units
Input Voltage
Input
Lockout
2.5
5.5
V
Under-Voltage
VIN rising, VOUT=1.8V
1.95
2.3
V
Hysteresis of UVLO
160
0.8
mV
V
V
VOUT=0.8V, IOUT=1mA, TJ=25°C
VOUT=0.8V, IOUT=1mA, -40°C≤TJ≤+125°C
IOUT=1mA, TJ=25°C
0.784
0.776
-2
0.816
0.824
2
FB Voltage
Output Voltage Accuracy
%
IOUT=1mA, -40°C≤TJ≤125°C
-3
3
Maximum Output Current
Short-Circuit Current Limit
Continuous
250
350
mA
mA
VOUT=0, VIN≥2.5V
VOUT within 4% of normal output voltage
VIN=5.5V
IOUT=0.1mA
IOUT=250mA
IOUT=250mA,
VOUT=3.3V,
VIN from VOUT+0.5V or 2.5V to 5.5V,
IOUT=100mA,
IOUT from 100mA to
250mA
550
550
850
800
In-Regulation Current Limit
Ground Current
300
mA
150
220
100
100
250
330
150
200
μA
TJ=25°C
-40°C≤TJ≤125°C
Dropout Voltage(6)
mV
%/V
%
Line Regulation(7)
-0.15
0.15
VOUT=1.8V, 3.3V
VOUT=2.5V
VOUT=1.8V
VOUT=3.3V
f=100Hz
f=1kHz
f=10kHz
f=1MHz
TJ=25°C
-0.3
-0.4
0.3
0.4
Load Regulation@Vtyp(8)
Output-Voltage Noise(9)
20
35
65
63
63
33
0.1
10
0.1
IOUT=100mA, f ranges
from 10Hz to 100kHz
μVRMS
VOUT
3.3V
= 1.8V, 2.5V,
PSRR(9)
dB
IOUT = 250mA
0.3
30
0.3
Shutdown Supply Current
EN Pin Current , Enabled
VIN=+5.5V
μA
μA
-40°C≤TJ≤125°C
VIN=VEN=+5.5V
C
OUT=4.7μF,
VOUT=1.8V
100
300
450
Startup Time
VOUT=10% to
90%VOUT(NOM)
μs
VOUT=3.3V, 2.5V
100
1.5
EN Logic High
EN Logic Low
EN PIN Threshold
V
0.4
Thermal Shutdown(9)
150
20
°C
°C
Thermal
Hysteresis(9)
Notes:
Shutdown
6) Dropout Voltage is defined as the input to output differential when the output voltage drops 100mV below its nominal value.
VOUT V
− VOUT V
IN(MIN)
IN(MAX)
7) Line Regulation=
×(% / V)
× VOUT(NOM)
V
− V
)
IN(MIN)
IN MAX
(
V
− V
OUT IOUT(MIN)
OUT IOUT(MAX)
8) Load Regulation=
×(%)
VOUT NOM
(
)
9) Design guarantee, no test in production
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
3
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
PIN FUNCTIONS
Pin #
QFN8
(2x2mm)
Pin #
TSOT23-5
Name Pin Function
1,
Ground. Connect exposed pad to GND plane for optimal thermal
performance.
Exposed
Pad
2
3
1
5
GND
EN
Regulator Enable Control Input. Drive EN above 1.5V to turn on the
MPQ20056. Drive EN below 0.4V to turn it off. Do not float the EN pin.
2
Regulator Input. Supply voltage ranges from 2.5V to 5.5V. Bypass with a
2.2μF capacitor. These pins must be externally connected for proper
operation even if they are internally connected.
3, 4
VIN
Regulator Output. Bypass with a standard 4.7μF ceramic capacitor to GND.
Connect all the pins together externally.
5, 6
7
VOUT
NC
No Connection. Leave this NC pin open.
Feedback Input. Connect FB to the center point of the external resistor
divider. The feedback threshold voltage is 0.8V.
8
4
FB
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
4
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
TYPICAL PERFORMANCE CHARACTERISTICS
VIN=2.5V/3.7V, VOUT=1.8V/3.3V, TA=25ºC, unless otherwise noted.
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
5
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
VIN=2.5V, VOUT=1.8V, TA=25ºC, unless otherwise noted.
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
6
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
VIN=3.7V, VOUT=3.3V, TA=25ºC, unless otherwise noted.
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
7
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
TA=25ºC, unless otherwise noted.
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
8
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
FUNCTIONAL BLOCK DIAGRAM
VIN
UVLO
Vreference
EA
VOUT
FB
EN
GND
Figure 1: Functional Block Diagram
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
9
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
OPERATION
The MPQ20056 is a low-dropout linear regulator
that can supply up to 250mA current, which
makes it suitable for very low voltage, low
quiescent, low noise, and high PSRR
applications, such as wireless LAN transceivers,
notebook computers, smartphones, and other
low-power electronics.
Current Limit
The MPQ20056 includes a current limit structure
that monitors and controls the PMOS gate
voltage to limit the guaranteed maximum output
current to 0.4A.
Thermal Protection
Thermal protection turns off the PMOS when the
junction temperature exceeds 150°C, allowing
the IC to cool. When the IC’s junction
temperature drops by 20°C, the PMOS will turn
on again. Thermal protection limits total power
dissipation in the MPQ20056. For reliable
operation, limit the junction temperature to a
maximum of 125°C.
The MPQ20056 uses an internal PMOS as the
pass element and includes both thermal
shutdown and an internal current-limiting circuit.
Dropout Voltage
Dropout voltage is the minimum input to output
differential voltage required for the regulator to
maintain an output voltage within 100mV of its
nominal value. Because the PMOS pass element
behaves as a low-value resistor.
Load-Transient Considerations
The output response of the load-transient
consists of a transient response and DC shift—
the MPQ20056’s excellent load regulation
effectively limits the DC shift. The output voltage
transient depends on the output capacitor’s value
and ESR. Increasing the capacitance and
decreasing the ESR will improve the transient
response.
Shutdown
The MPQ20056 can be switched ON or OFF by a
logic input at the EN pin: Logic high turns the
regulator on and logic low turns it off. Tie the EN
pin to VIN if the application does not require the
shutdown feature. Do not float the EN pin.
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
10
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
APPLICATION INFORMATION
Setting the Output Voltage
The allowable power dissipation can be
calculated using the following equation:
The output voltage of the MPQ20056 is preset to
1.8V, 2.5V or 3.3V by internal resistor divider.
The output voltage also can be adjusted by using
an external resistor divider (R1 and R2 in Figure
2).
P
=
(
TJunction − TAmbient / θJA
)
(MAX)
Where (TJunction − TAmbient) is the temperature
differential between the junction and the
surrounding environment, θJA is the thermal
resistance from the junction to the ambient
environment. Connecting the exposed GND pad
to a large ground pad or plane helps to channel
away heat.
VOUT
R1
FB
MPQ20056
Output Capacitor Selection
R2
The MPQ20056 is specifically designed to work
with a standard ceramic output capacitor to save
space and improve performance. Use a 4.7µF
ceramic capacitor for most applications. Larger
output capacitors will improve load transient
response and reduce noise at the cost of
increased size.
GND
Figure 2: Setting the Output Voltage
However, the sum of R1 and R2 should not
exceed 10kΩ to minimize their impact on the
internal resistor divider. For an accurate output-
voltage setting, use 1kΩ (±1%) for R2, and
determine R1 with:
VOUT − VFB
R1 = R2×
VFB
For example, for a 1.1V output voltage, R2 is
1kΩ, and R1 is 374Ω. You can select a standard
374Ω (±1%) resistor for R1.
Power Dissipation
The power dissipation for any package depends
on the thermal resistance of the case and circuit
board, the temperature differential between the
junction and ambient air, and the rate of air flow.
The power dissipation across the device can be
represented by the equation:
P =
(
V
IN − VOUT ×IOUT
)
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
11
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
TYPICAL APPLICATION CIRCUITS
Figure 3: 1.8V Fixed Output Application (QFN-8L)
Figure 4: 2.5V Fixed Output Application (TSOT23-5L)
Figure 5: 3.3V Fixed Output Application (TSOT23-5L)
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
12
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
PACKAGE INFORMATION
QFN8 (2×2mm)
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
13
MPQ20056 – LOW-NOISE, HIGH-PSRR, 250mA LINEAR REGULATOR, AEC-Q100 QUALIFIED
PACKAGE INFORMATION
TSOT23-5
0.95
BSC
0.60
TYP
2.80
3.00
5
4
1.20
TYP
1.50
1.70
2.60
TYP
2.60
3.00
1
3
TOP VIEW
RECOMMENDED LAND PATTERN
0.84
0.90
1.00 MAX
SEATING PLANE
0.09
0.20
0.30
0.50
0.00
0.10
0.95 BSC
SEE DETAIL "A"
FRONT VIEW
SIDE VIEW
NOTE:
1) ALL DIMENSIONS ARE IN MILLIMETERS.
2) PACKAGE LENGTH DOES NOT INCLUDE MOLD FLASH,
PROTRUSION OR GATE BURR.
GAUGE PLANE
0.25 BSC
3) PACKAGE WIDTH DOES NOT INCLUDE INTERLEAD FLASH
OR PROTRUSION.
0.30
0.50
4) LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING)
SHALL BE 0.10 MILLIMETERS MAX.
0o-8o
5) DRAWING CONFORMS TO JEDEC MO-193, VARIATION AA.
6) DRAWING IS NOT TO SCALE.
DETAIL “A”
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.
MPQ20056 Rev.1.1
5/24/2016
www.MonolithicPower.com
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
14
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明