10EHZ-226/C02 [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10EHZ-226/C02
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总3页 (文件大小：97K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10EHZ

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

High-density Signal Conditioners 10-RACK

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

J: 0 – 5 mA DC (Load resistance 2400 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

FREQUENCY TRANSDUCER

Functions & Features

• Providing a DC output signal in proportion to deviation (±5

Hz) from center frequency (50 Hz or 60 Hz)

• DC output containing little ripple is ideal for computer

input

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

• Isolation up to 2000 V AC (input)

Typical Applications

• Centralized monitoring and control of power management

system in manufacturing facility or building

• Measuring frequency for UPS

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

MODEL: 10EHZ–[1][2][3]–R[4]

/C02: Polyurethane coating

/C03: Rubber coating

ORDERING INFORMATION

• Code number: 10EHZ-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10EHZ-11A-R/Q)

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

[1] FREQUENCY

1: 45 – 55 Hz

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

2: 55 – 65 Hz

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

3: 45 – 65 Hz

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

[2] INPUT

1: 110 V AC

2: 220 V AC

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

Input burden: 1 VA max.

[3] OUTPUT

Current

Operational range: 85 – 120 % of rating

Overload capacity: 150 % of rating for 10 sec., 120 %

continuous

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

http://www.m-system.co.jp/

10EHZ SPECIFICATIONS

ES-0844 Rev.2 Page 1/3

MODEL: 10EHZ

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 12 V maximum

■ DC Voltage: 0 – 12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

■ OPERATION DIAGRAM (example)

OUT

20mA

OUT

10V

65 Hz

Remark: When there is no input voltage,

the transducer outputs as negative (–) overrange.

INSTALLATION

Current consumption: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 400 g (0.88 lb)

PERFORMANCE in percentage of span

Accuracy: ±1.0 %

Temp. coefficient: ±0.1 %/°C (±0.06 %/°F)

Response time: ≤ 1 sec. (0 – 90 %)

Ripple: 0.5 %p-p max.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(input to output or power to ground)

500 V AC @ 1 minute (output to power)

CONNECTION DIAGRAM

SOURCE

FUSE

–

OUTPUT

POWER

LOAD

http://www.m-system.co.jp/

10EHZ SPECIFICATIONS

ES-0844 Rev.2 Page 2/3

MODEL: 10EHZ

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

Terminals 8 through 11 are deleted.

8 (.31)

15–M3.5 SCREW

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

10 11

12 13 14 15

26 (1.02)

50 (1.97)

3 (.12)

51 (2.01)

130 (5.12)

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10EHZ SPECIFICATIONS

ES-0844 Rev.2 Page 3/3

相关型号：