10LCS-060-R [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10LCS-060-R
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总3页 (文件大小：95K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10LCS

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

High-density Signal Conditioners 10-RACK

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

STRAIN GAUGE TRANSMITTER

Functions & Features

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

• Providing a DC output signal proportional to a bridge type

strain gauge utilized in load cells, pressure transducers

• Supplying required excitation voltage

• Excitation adjustable from 2 V to 10 V

• Wide-range adjustment: 0 – 80 % for zero, 20 – 100 % for

span

OUTPUT 2

Typical Applications

0: None

• Weighing system for tanks, hoppers, silos

• Weighing system using cranes

• Float level meter utilizing strain gauges

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

MODEL: 10LCS–[1][2]0–R[3]

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

ORDERING INFORMATION

• Code number: 10LCS-[1][2]0-R[3]

Specify a code from below for each [1] through [3].

(e.g. 10LCS-2A0-R/Q)

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

• Specify the specification for option code /Q

(e.g. /C01)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

[1] INPUT STRAIN GAUGE

2: 2 mV/V

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

0: Specify (strain gauge and excitation)

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Excitation adjustment: 2 – 10 V (front)

Zero adjustment (tare): 0 – 80 % (front)

(May not applicable when the excitation voltage is changed

after shipment.)

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

Span adjustment: 100 – 20 % (front)

(May not applicable when the excitation voltage is changed

after shipment.)

http://www.m-system.co.jp/

10LCS SPECIFICATIONS

ES-0835 Rev.6 Page 1/3

MODEL: 10LCS

INPUT SPECIFICATIONS

■ Input: Bridge voltage from load cells

• Strain Gauge

Rated output from strain gauge: 1 – 20 mV/V;

Input to this module must be over 3 mV.

• Excitation: 2 – 10 V adjustable (5 V standard)

Maximum current: 35 mA

INSTALLATION

Current consumption: Approx. 120 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % (input ≥ 3 mV)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F) (input ≥ 3

mV)

Response time: ≤ 0.5 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output to power)

1500 V AC @ 1 minute (input or output or power to ground)

EXTERNAL VIEW

Excitation

Zero

Span

http://www.m-system.co.jp/

10LCS SPECIFICATIONS

ES-0835 Rev.6 Page 2/3

MODEL: 10LCS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7–M3.5 SCREW

8 (.31)

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

3 (.12)

25 (.98)

51 (2.01)

130 (5.12)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

STRAIN

GAUGE

Low Drift

Amplifier

Output

Driver

–

OUTPUT

Low Drift

DC Volt.

Stabilizer

EXC.

OUTPUT

POWER

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10LCS SPECIFICATIONS

ES-0835 Rev.6 Page 3/3

相关型号：