10MK-E0-R [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10MK-E0-R
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总3页 (文件大小：91K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10MK

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

High-density Signal Conditioners 10-RACK

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

POTENTIOMETER TRANSMITTER

(fast response)

Functions & Features

• Providing two DC outputs proportional to a potentiometer

or slidewire position input

[2] OUTPUT 2

0: None

• 50 % zero/span adjustments with minimal interaction

• Optional second channel output available at the front

terminals and at the Standard Rack connector

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

Typical Applications

• Tank levels

POWER INPUT

DC Power

• Positions

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

MODEL: 10MK–[1][2]–R[3]

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

ORDERING INFORMATION

• Code number: 10MK-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. 10MK-A6-R/Q)

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

• Specify the specification for option code /Q

(e.g. /C01)

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

INPUT POTENTIOMETER

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: 0 – 50 % of total resistance (front)

Span adjustment: 50 – 100 % of total resistance (front)

Total resistance 100 Ω – 10 kΩ

[1] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

INPUT SPECIFICATIONS

Minimum span: 50 % of total resistance

Excitation: Approx. 0.2 V DC

INSTALLATION

Current consumption: Approx. 35 mA with voltage output 1

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

Approx. 55 mA with current output 1

http://www.m-system.co.jp/

10MK SPECIFICATIONS

ES-0849 Rev.2 Page 1/3

MODEL: 10MK

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Approx. 25 msec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output 1 to output 2 to power)

1500 V AC @ 1 minute (input or output or power to ground)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7–M3.5 SCREW

8 (.31)

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

3 (.12)

25 (.98)

51 (2.01)

130 (5.12)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

POTENTIOMETER

max.

Excitation

Circuit

Isolation

Low Drift

Amplifier

Voltage/

Duty Cycle

Output

Driver

–

OUTPUT 1

OUTPUT 2

–

min.

Output

Driver

–

OUTPUT 2*

POWER

*1 output type has the output 1 connected to the card-edge connector in parallel.

Remark 1) The section enclosed by broken line is only for 2nd output channel.

http://www.m-system.co.jp/

10MK SPECIFICATIONS

ES-0849 Rev.2 Page 2/3

MODEL: 10MK

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10MK SPECIFICATIONS

ES-0849 Rev.2 Page 3/3

相关型号：