10PE-5E0-R [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10PE-5E0-R
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总3页 (文件大小：92K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10PE

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

High-density Signal Conditioners 10-RACK

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

PT TRANSMITTER

(RMS sensing)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

Functions & Features

• Converting an alternating voltage from a potential

(voltage) transformer into two standard process signals

• Minimum ripple

• Optional second channel output available at the front

terminals and at the Standard Rack connector

[3] OUTPUT 2

0: None

Typical Applications

Voltage

• Centralized monitoring and control of power line and

power supply voltage measured at switch boards

• Monitoring abnormal voltage drops for detecting overload

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

MODEL: 10PE–[1][2][3]–R[4]

/C03: Rubber coating

ORDERING INFORMATION

• Code number: 10PE-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10PE-1A6-R/Q)

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

• Specify the specification for option code /Q

(e.g. /C01)

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

[1] INPUT

Voltage

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

1: 0 – 110 V AC

5: 0 – 150 V AC

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Input waveform: Up to 15 % of 3rd harmonic content

Overrange output: Approx. 0 to 120 % at 1 – 5V

Zero adjustment: -5 to +5 % (front)

[2] OUTPUT 1

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

Frequency: 50 or 60 Hz

Input burden: 0.5 VA max.

http://www.m-system.co.jp/

10PE SPECIFICATIONS

ES-0852 Rev.1 Page 1/3

MODEL: 10PE

Overload capacity: 200 % of rating for 1 minute, 120 %

continuous

Operational range: 0 – 120 % of rating

INSTALLATION

Current consumption: Approx. 35 mA with voltage output 1

Approx. 55 mA with current output 1

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.4 %

Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Ripple: 0.5 %p-p max. (100/120 Hz)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(input to output 1 or output 2 or power)

500 V AC @ 1 minute

(output 1 to output 2 to power)

1500 V AC @ 1 minute

(input or output or power to ground)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7–M3.5 SCREW

8 (.31)

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

3 (.12)

25 (.98)

51 (2.01)

130 (5.12)

http://www.m-system.co.jp/

10PE SPECIFICATIONS

ES-0852 Rev.1 Page 2/3

MODEL: 10PE

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SOURCE

Isolation

FUSE

Low Drift

Amplifier

RMS

Operation

Output

Driver

–

Divider

OUTPUT 1

OUTPUT 2

LOAD

Voltage/

Duty Cycle

Output

Driver

–

Isolation

OUTPUT 2*

POWER

*1 output type has the output 1 connected to the card-edge connector in parallel.

Remark 1) The section enclosed by broken line is only for 2nd output channel.

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10PE SPECIFICATIONS

ES-0852 Rev.1 Page 3/3

相关型号：