10PP-322-R [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10PP-322-R
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总4页 (文件大小：111K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10PP

High-density Signal Conditioners 10-RACK

[3] OUTPUT 2

0: None

2: Open collector (max. 10 kHz)

PULSE ISOLATOR

Functions & Features

• Galvanically isolating pulse rate signals

• Input frequency = output frequency

• Various outputs (relay, open collector and voltage pulses)

• Optional second channel output available at the front

terminals and at the Standard Rack connector

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

Typical Applications

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear; terminal cover provided

Connection: M3.5 screw terminals (torque 0.8 N·m) and

card-edge connector

MODEL: 10PP–[1][2][3]–R[4]

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

ORDERING INFORMATION

• Code number: 10PP-[1][2][3]-R[4]

Specify a code from below for each of [1] through [4].

(e.g. 10PP-332-R/Q)

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Frequency range: Input and output are the same.

Chattering protection: Filter provided for mechanical

contact input

• Frequency range (e.g. 0 – 1000 Hz)

• Specify the specification for option code /Q

(e.g. /C01)

INPUT SPECIFICATIONS

Excitation: 12V DC ±2 V @ 30 mA; shortcircuit protection

■ Open Collector

Note: Output 1 and 2 frequency is equal.

[1] INPUT

Maximum frequency: 10 kHz

1: Mechanical contact (max. 30 Hz)

2: Open collector (max. 10 kHz)

3: Voltage pulse (max. 10 kHz)

Pulse width time requirement: 10 μsec. min. for ON and OFF

Sensing: Approx. 12 V DC @ 3 mA

ON/OFF level: ≤ 200 Ω / 3.5 V for ON, ≥ 100 kΩ / 7 V for OFF

■ Mechanical Contact

Maximum frequency: 30 Hz

[2] OUTPUT 1

Pulse width time requirement: 10 msec. min. for ON and

OFF

1: Low frequency open collector (max. 30 Hz)

2: High frequency open collector (max. 10 kHz)

3: 5 V pulse (max. 10 kHz)

Sensing: Approx. 12 V DC @ 3 mA

ON/OFF level: ≤ 200 Ω / 3.5 V for ON, ≥ 100 kΩ / 7 V for OFF

■ Voltage Pulse

4: 12 V pulse (max. 10 kHz)

5: 24 V pulse (max. 10 kHz)

Maximum frequency: 10 kHz

8: Photo MOSFET relay pulse (max. 30 Hz)

Pulse width time requirement: 10 μsec. min. for high and

low levels

10PP SPECIFICATIONS

ES-0861 Rev.9 Page 1/4

http://www.m-system.co.jp/

MODEL: 10PP

Waveforms: Square or sine

Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level

Input impedance: 10 kΩ min.

OUTPUT SPECIFICATIONS

■ Low Frequency Open Collector (Output 1)

50 V DC @ 100 mA (resistive load)

Maximum frequency: 30 Hz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Saturation voltage: 0.5 V DC

■ High Frequency Open Collector (Output 1)

50 V DC @ 100 mA (resistive load)

Maximum frequency: 10 kHz

Saturation voltage: 0.5 V DC

■ Open Collector (Output 2)

40 V DC @ 100 mA (resistive load)

Maximum frequency: 10 kHz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses (Timer is provided when output 1 is low

frequency open collector or photo MOSFET relay pulse.)

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 10 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5V

Load resistance:

≥ 250 Ω for 5 V

≥ 600 Ω for 12 V

≥ 1200 Ω for 24 V

■ Photo MOSFET Relay Pulse

Maximum frequency: 30 Hz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Rating: 132 V AC @ 200 mA (cos ø = 1)

30 V DC @ 200 mA (resistive load)

ON resistance: ≤ 2 Ω

INSTALLATION

Current consumption: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 200 g (0.44 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output 1 to output 2 to power)

1500 V AC @ 1 minute (input or output or power to ground)

10PP SPECIFICATIONS

ES-0861 Rev.9 Page 2/4

http://www.m-system.co.jp/

MODEL: 10PP

OUTPUT LOGIC

Applicable for both Output 1 and 2.

VOLTAGE PULSE

OUTPUT

OPEN COLLECTOR or

PHOTO MOSFET RELAY PULSE OUTPUT

INPUT TYPE

Voltage Pulse

INPUT

OFF

Mechanical Contact

Open Collector

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7–M3.5 SCREW

8 (.31)

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

3 (.12)

25 (.98)

51 (2.01)

130 (5.12)

10PP SPECIFICATIONS

ES-0861 Rev.9 Page 3/4

http://www.m-system.co.jp/

MODEL: 10PP

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Output

Driver

–

Timer

INPUT

OUTPUT 1

OUTPUT 2

SENSOR EXCITATION

12 V Supply

Output

Driver

–

Isolation

OUTPUT 2**

POWER

* Timer is provided for low frequency open collector or photo MOSFET relay pulse output.

For 1 output channel type, OUTPUT 1 is also connected to the card-edge connector inside.

Note: The section enclosed by broken line is only for 2nd output channel.

Input Connection Examples

Output Connection Examples

■ Mechanical Contact or Open Collector

■ Open Collector

■ Photo MOSFET Relay Pulse

• AC Powered

Relay or

Counter Coil

–

Varistor or Spark

Quenching Circuit

LOAD

+12V

PWR

4kΩ

■ Voltage Pulse

• DC Powered

■ Voltage Pulse

Relay or

Counter Coil

–

Spark Quenching

Diode

–

LOAD

+12V

PWR

Specifications are subject to change without notice.

10PP SPECIFICATIONS

ES-0861 Rev.9 Page 4/4

http://www.m-system.co.jp/

相关型号：