10PV-2D6-R [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10PV-2D6-R
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总3页 (文件大小：92K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10PV

5: 0 – 5 V DC (Load resistance 500 Ω min.)

High-density Signal Conditioners 10-RACK

6: 1 – 5 V DC (Load resistance 500 Ω min.)

P/I TRANSDUCER

Functions & Features

[3] OUTPUT 2

0: None

• Converting a standard pneumatic signal into a

proportional DC output

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

• Optional second channel output available at the front

terminals and at the Standard Rack connector

POWER INPUT

DC Power

Typical Applications

• Converting a pneumatic system into a 4 – 20 mA for

indicating and controlling in DCS system

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Pressure Range

blank: 0.2 - 1.0kgf/cm

/A1S: 19.6 – 98.1 kPa

/A2S: 20 – 100 kPa

/A3S: 20.7 – 103.4 kPa

/A2: 0.2 – 1.0 bar

/A3: 3 – 15 psig

Other Options

MODEL: 10PV-[1][2][3]-R[4]

blank: none

/Q: Option other than the above (specify the specification)

ORDERING INFORMATION

• Code number: 10PV-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10PV-2A6-R/A2S/Q)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Specify the specification for option code /Q

(e.g. /C01)

/C02: Polyurethane coating

/C03: Rubber coating

[1] PNEUMATIC CONNECTION

2: Rc 1/4"

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear

5: Rc 1/8" fitting

7: 1/4" NPT fitting

Connection

Output: M3.5 screw terminals (torque 0.8 N·m) and card-

edge connector

[2] OUTPUT 1

Current

Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female (torque

≤12 N·m)

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

Power input: Supplied from card-edge connector

Material

Housing: Flame-resistant resin (black)

Base: Die cast aluminium

Screw terminals: Nickel-plated steel

Isolation: Output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

http://www.m-system.co.jp/

10PV SPECIFICATIONS

ES-0820 Rev.11 Page 1/3

MODEL: 10PV

INPUT SPECIFICATIONS

■ Input

19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm

20 – 100 kPa, 0.2 – 1.0 bar

20.7 – 103.4 kPa, 3 – 15 psig

INSTALLATION

Current consumption: Approx. 35 mA with voltage output 1

Approx. 55 mA with current output 1

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.2 %

Temp. coefficient: ±0.03 %/°C (±0.02 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28

psig)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(output 1 to output 2 to power)

1500 V AC @ 1 minute (output or power to ground)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

approx.

27 (1.06)

20 (.79)

2–4.3 (.17) dia.

MTG HOLE

[13 (.51)]

** FITTING

PNEUMATIC CONNECTION

Rc 1/4”, Rc 1/8”, 1/4” NPT

4–M3.5 SCREW

3 (.12)

25 (.98)

32 (1.26)

130 (5.12)

* [ ] for Rc 1/8".

** Fitting provided for Rc 1/8" or 1/4" NPT connection.

8 (.31)

http://www.m-system.co.jp/

10PV SPECIFICATIONS

ES-0820 Rev.11 Page 2/3

MODEL: 10PV

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Semiconductor

Pressure Sensor

Output

Driver

–

Amplifier

INPUT

OUTPUT 1

OUTPUT 2

Voltage/

Duty Cycle

Output

Driver

–

Isolation

OUTPUT 2*

POWER

*1 output type has the output 1 connected to the card-edge connector in parallel.

Remark 1) The section enclosed by broken line is only for 2nd output channel.

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10PV SPECIFICATIONS

ES-0820 Rev.11 Page 3/3

相关型号：