10SN-AA0/C03 [MSYSTEM]
High-density Signal Conditioners 10-RACK;型号: | 10SN-AA0/C03 |
厂家: | M-SYSTEM |
描述: | High-density Signal Conditioners 10-RACK |
文件: | 总3页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: 10SN
High-density Signal Conditioners 10-RACK
OUTPUT 2
0: None
INPUT LOOP POWERED ISOLATOR
Functions & Features
[3] OPTIONS
• Loop-powered design eliminates output loop power supply
• 500 V DC input-to-output isolation
blank: none
/Q: With options (specify the specification)
• 350 Ω output drive with 4 – 20 mA
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Typical Applications
• Isolation between control room and field instrumentation,
between telemetering system and input device
• Eliminates ground problems in existing systems thanks to
easiness of application without requiring additional power
wiring
/C02: Polyurethane coating
/C03: Rubber coating
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear; terminal cover provided
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: Card-edge connector and M3.5 screw terminals
(torque 0.8 N·m)
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output
Zero adjustment (front)
Voltage output: -5 to +5 %
Current output: -0.5 to +0.5 %
MODEL: 10SN–[1][2]0[3]
Span adjustment (front)
Voltage output: 95 to 105 %
Current output: 98.5 to 101.5 %
ORDERING INFORMATION
• Code number: 10SN-[1][2]0[3]
Specify a code from below for each [1] through [3].
(e.g. 10SN-A60/Q)
INPUT & OUTPUT
■ Input 4 – 20 mA DC / Output 1 – 5 V DC
Equivalent input impedance: Approx. 250 Ω with 20 mA
input
• Specify the specification for option code /Q
(e.g. /C01)
Operational range: 3 – 22 mA DC
(Accuracy is assured within 4 – 22 mA)
Load resistance: ≥ 50 kΩ
[1] INPUT
Current
A: 4 – 20 mA DC
H: 10 – 50 mA DC
■ Input 10 – 50 mA DC / Output 1 – 5 V DC
Equivalent input impedance: Approx. 100 Ω with 50 mA
input
[2] OUTPUT 1
Current
Operational range: 7 – 55 mA DC
(Accuracy is assured within 8 – 55 mA)
Load resistance: ≥ 50 kΩ
A: 4 – 20 mA DC
Voltage
6: 1 – 5 V DC
■ Input 4 – 20 mA DC / Output 4 – 20 mA DC
Equivalent input impedance: 230 Ω plus load resistance with
20 mA input
Operational range: 3 – 22 mA DC
http://www.m-system.co.jp/
10SN SPECIFICATIONS
ES-0819 Rev.6 Page 1/3
MODEL: 10SN
(Accuracy is assured within 4 – 22 mA)
Load resistance: 50 – 350 Ω (min. 50 Ω required for
adequate operation)
Weight: 200 g (0.44 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.1 %
■ Input 10 – 50 mA DC / Output 4 – 20 mA DC
Equivalent input impedance: 90 Ω + [load resistance×0.16]
with 50 mA input
Temp. coefficient
Voltage output: ±0.015 %/°C (±0.008 %/°F)
Current output: ±0.02 %/°C (±0.01 %/°F)
Response time
Operational range: 7 – 55 mA DC
(Accuracy is assured within 8 – 55 mA)
Load resistance: 50 – 600 Ω (min. 50 Ω required for
adequate operation)
Voltage output: ≤ 0.5 sec. (0 – 90 %)
Current output: Approx. 15 msec. (0 – 90 %)
Load effect (current output)
•INPUT 4 – 20 mA DC / OUTPUT 1 – 5 V DC
4 – 20 mA input: 0.015 %/Ω (50 – 150 Ω)
0.003 %/Ω (150 – 350 Ω)
5.0
approx. 5.0
10 – 50 mA input: 0.015 %/Ω (50 – 100 Ω)
0.003 %/Ω (100 – 600 Ω)
4.0
approx.
3.7
(The unit is calibrated with 250 Ω load at the factory.)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(input to output)
3.0
4
12
20
INPUT CURRENT [mA]
1500 V AC @ 1 minute
•INPUT 10 – 50 mA DC / OUTPUT 1 – 5 V DC
(input or output to ground)
5.0
approx. 5.0
4.0
approx.
3.7
3.0
10
30
50
INPUT CURRENT [mA]
•INPUT 4 – 20mA DC / OUTPUT 4 – 20 mA DC
12.0
approx. 11.6
(load 350Ω)
10.0
8.0
approx. 9.6
(load 250Ω)
6.0
approx. 5.0
approx. 4.6
approx. 3.8
approx. 5.6
(load 50Ω)
3.0
4
12
20
INPUT CURRENT [mA]
•INPUT 10 – 50 mA DC / OUTPUT 4 – 20 mA DC
10.0
approx. 9.3
(load 600Ω)
8.0
approx. 6.5
(load 250Ω)
6.0
approx. 4.7
approx. 4.1
approx. 3.8
3.0
approx. 4.9
(load 50Ω)
10
30
50
INPUT CURRENT [mA]
INSTALLATION
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 10BXx
http://www.m-system.co.jp/
10SN SPECIFICATIONS
ES-0819 Rev.6 Page 2/3
MODEL: 10SN
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
7–M3.5 SCREW
8 (.31)
2–4.3 (.17) dia.
MTG HOLE
TERMINAL COVER
1
5
2
6
3
7
8
3 (.12)
25 (.98)
51 (2.01)
130 (5.12)
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
■ VOLTAGE OUTPUT
Z
S
Buffer
Amplifier
+
–
1
2
3
5
6
Chopper
Inverter
7
8
+
–
INPUT
OUTPUT
OUTPUT
Rectifier
■ CURRENT OUTPUT
S
Isolation
Inverter
Load Effect
Compensation
+
–
1
7
8
+
–
OUTPUT
Z
INPUT
2
3
5
6
OUTPUT
Specifications are subject to change without notice.
http://www.m-system.co.jp/
10SN SPECIFICATIONS
ES-0819 Rev.6 Page 3/3
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明