10TS-856-R [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10TS-856-R
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总4页 (文件大小：102K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10TS

0: Specify

High-density Signal Conditioners 10-RACK

[2] OUTPUT 1

Current

THERMOCOUPLE TRANSMITTER

Functions & Features

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Voltage

• Accepting direct input from a thermocouple and providing

two standard process signals

• 5-segment linearization

• Burnout protection

• High-accuracy cold junction compensation

• Optional second channel output available at the front

terminals and at the Standard Rack connector

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

Typical Applications

• High-accuracy cold junction compensation benefits narrow

span measurements

• 0.1 μA burnout sensing enables long distance

transmission with minimum offset drifts

• Electric furnace (isolation)

• No burnout type can connect to a single T/C in parallel

with a recorder

[3] OUTPUT 2

0: None

Voltage

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[4] OPTIONS (multiple selections)

Burnout

MODEL: 10TS-[1][2][3]-R[4]

blank: Upscale burnout

/BL: Downscale burnout

ORDERING INFORMATION

• Code number: 10TS-[1][2][3]-R[4]

Specify a code from below for each [1] through [4].

(e.g. 10TS-2A6-R/BL/Q)

/BN: No burnout

CJC Sensor

blank: With Cold Junction Compensation Sensor

/N: Without Cold Junction Compensation Sensor

Other Options

• Temperature range (e.g. 0 – 800 ℃)

• Specify the specification for option code /Q

(e.g. /C01)

blank: none

/Q: Option other than the above (specify the specification)

[1] INPUT THERMOCOUPLE

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)

2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)

3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)

4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)

5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)

6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)

7: R (Usable range -50 to +1760°C, -58 to +3200°F)

8: S (Usable range -50 to +1760°C, -58 to +3200°F)

N: N (Usable range -270 to +1300°C, -454 to +2372°F)

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

http://www.m-system.co.jp/

10TS SPECIFICATIONS

ES-0812 Rev.9 Page 1/4

MODEL: 10TS

rear; terminal cover provided

INSTALLATION

Current consumption: Approx. 30mA with voltage output 1

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Output: Card-edge connector and M3.5 screw terminals

(torque 0.8 N·m)

Approx. 60mA with current output 1

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Power input: Supplied from card-edge connector

Screw terminal: Nickel-plated steel

Weight: 200 g (0.44 lb)

Housing material: Flame-resistant resin (black)

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

PERFORMANCE in percentage of span

Accuracy: ±0.4 % (at over 400°C or 750°F for R, S and PR;

over 770°C or 1420°F for B)

Span adjustment: 95 to 105 % (front)

At burnout: Downscale ≤ -10 %, Upscale ≥ 110 %

Linearization: Standard

Cold junction compensation error

(at 20°C ±10°C or 68°F ±18°F; with CJC sensor)

K, E, J, T, N: ±0.5°C or ±0.9°F

Cold junction compensation (CJC): CJC sensor attached to

the input terminals as standard; No CJC optional (B

thermocouple is without CJC as standard.)

S, R, PR: ±1°C or ±1.8°F

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

(at over 400°C or 750°F for R, S and PR; over 770°C or

1420°F for B)

INPUT SPECIFICATIONS

Input resistance: 20 kΩ minimum

Burnout sensing: 0.1 μA

Minimum span: 3 mV

Offset: Max. 1.5 times span

Minimum span (in °C)

(PR): 370°C

Response time: ≤ 0.5 sec. (0 – 90 %)

Burnout response: ≤ 10 sec.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output 1 to output 2 to power)

1500 V AC @ 1 minute (input or output or power to ground)

K (CA): 75°C

E (CRC): 50°C

J (IC): 60°C

T (CC): 75°C

B (RH): 780°C

R: 360°C

S: 380°C

N: 110°C

Minimum span (in °F)

(PR): 670°F

K (CA): 140°F

E (CRC): 90°F

J (IC): 110°F

T (CC): 140°F

B (RH): 1410°F

R: 650°F

S: 690°F

N: 200°F

For the temperatures that range below 0°C, the transmitter

may partially not satisfy the described accuracy. Consult

factory.

http://www.m-system.co.jp/

10TS SPECIFICATIONS

ES-0812 Rev.9 Page 2/4

MODEL: 10TS

DIMENSIONS unit: mm (inch)

Terminal 3 is deleted with CJC sensor attached models.

7–M3.5 SCREW

8 (.31)

2–4.3 (.17) dia.

MTG HOLE

TERMINAL COVER

3 (.12)

25 (.98)

51 (2.01)

130 (5.12)

TERMINAL ASSIGNMENTS

CJC SENSOR

(model: CJM)

*Deleted with Option /N

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Burnout

Protection

comp. leadwire

Isolation

T / C

Low Drift

Amplifier

Voltage/

Duty Cycle

Output

Driver

Linearizer

OUTPUT 1

–

metal leg

–

Output

Driver

CJC

SENSOR

CJC Sensing

Volt. Generator

red

black

OUTPUT 2

–

model: CJM

OUTPUT 2***

POWER

Deleted with Option /N.

** Deleted with Option /N or B thermocouple.

***1 output type has the output 1 connected to the card-edge connector in parallel.

Remark 1) The section enclosed by broken line is only for 2nd output channel.

http://www.m-system.co.jp/

10TS SPECIFICATIONS

ES-0812 Rev.9 Page 3/4

MODEL: 10TS

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10TS SPECIFICATIONS

ES-0812 Rev.9 Page 4/4

相关型号：