10VPN-5A10/Q [MSYSTEM]

High-density Signal Conditioners 10-RACK;


型号：	10VPN-5A10/Q
厂家：	M-SYSTEM
描述：	High-density Signal Conditioners 10-RACK
文件：	总3页 (文件大小：97K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 10VPN

High-density Signal Conditioners 10-RACK

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

LOOP POWERED I/P TRANSDUCER

Functions & Features

• Converting a DC input into a proportional standard

pneumatic signal

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Loop powered

• Semiconductor pressure sensor in the feedback circuit

• High resolution

/C02: Polyurethane coating

/C03: Rubber coating

• No mounting position effect

RELATED PRODUCTS

• Standard rack with air manifold

The 10VPN must be installed in a 10-Rack series rack with

air manifold.

Typical Applications

• Converting a 4 – 20 mA from a PID controller into a

pneumatic signal

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals at the front and via card-edge connector at the

rear

Connection

Input: M3.5 screw terminals (torque 0.8 N·m) and card-

edge connector

Pneumatic: Rc 1/4", Rc 1/8" or 1/4" NPT female

(torque ≤ 12 N·m)

MODEL: 10VPN–[1]A[2]0[3]

Material

Housing: Flame-resistant resin (black)

Base: Die cast aluminium

ORDERING INFORMATION

• Code number: 10VPN-[1]A[2]0[3]

Specify a code from below for each [1] through [3].

(e.g. 10VPN-2A2S0/Q)

Screw terminals: Nickel-plated steel

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

• Specify the specification for option code /Q

(e.g. /C01)

INPUT SPECIFICATIONS

Equivalent input impedance: Approx. 310 Ω at 20 mA

The voltage measure at the input terminals changes

corresponding to the input signal as in the diagram below.

Be sure that the device at the input side allows the load

increase.

[1] PNEUMATIC CONNECTION

2: Rc 1/4"

5: Rc 1/8" fitting

7: 1/4" NPT fitting

approx. 6.2

INPUT

Current

6.0

A: 4 – 20 mA DC

5.8

[2] OUTPUT

1S: 19.6 – 98.1 kPa

2S: 20 – 100 kPa

approx. 5.7

INPUT CURRENT [mA]

3S: 20.7 – 103.4 kPa

1: 0.2 – 1.0 kgf/cm

2: 0.2 – 1.0 bar

3: 3 – 15 psig

http://www.m-system.co.jp/

10VPN SPECIFICATIONS

ES-0830 Rev.13 Page 1/3

MODEL: 10VPN

OUTPUT SPECIFICATIONS

■ Output:

19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm

20 – 100 kPa, 0.2 – 1.0 bar

20.7 – 103.4 kPa, 3 – 15 psig

The output goes below 0 % if the input loop is open.

Maximum air delivery: 60 Nl/minute (2.1 SCFM)

Maximum air exhaust: 60 Nl/minute (2.1 SCFM)

INSTALLATION

Supply pressure: 140 kPa (1.4 kgf/cm , 1.4 bar, 20 psig)

±10 %. Use dry air containing no carbon black or other

foreign particles. To ensure reliability use an air filter (0.01

microns).

Air consumption: 6 Nl/minute (0.21 SCFM)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 10BXx

Weight: 300 g (0.66 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.3 % including linearity and repeatability

Linearity: ±0.2 %

Repeatability: 0.1 %

Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)

Response time: ≤ 3 sec. (0 – 90 %)

Mounting position effect: ±0.1 % (all dimensions)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

approx.

27 (1.06)

20 (.79)

2–4.3 (.17) dia.

MTG HOLE

[13 (.51)]

**FITTING

OUTPUT CONNECTION

Rc 1/4”, Rc 1/8”, 1/4” NPT

4–M3.5 SCREW

3 (.12)

25 (.98)

32 (1.26)

130 (5.12)

25 (.98)

* [ ] for Rc 1/8".

**Fitting provided for Rc 1/8" or 1/4" NPT connection.

8 (.31)

http://www.m-system.co.jp/

10VPN SPECIFICATIONS

ES-0830 Rev.13 Page 2/3

MODEL: 10VPN

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SUPPLY

PRESSURE

Pilot

Valve

OUTPUT

Semiconductor

Pressure Sensor

–

Power

Supply

Deviation

Amplifier

Driver

ELECTRO-MAGNETIC

FLAPPER

INPUT

–

INPUT

MONITOR mA

(4 – 20mA DC)

When the input signal is provided from the card-edge connector,

the front terminals are not available for use.

Specifications are subject to change without notice.

http://www.m-system.co.jp/

10VPN SPECIFICATIONS

ES-0830 Rev.13 Page 3/3

相关型号：