18KBXH-E1 [MSYSTEM]

Rack-mounted DCS Signal Conditioners 18K-RACK;


型号：	18KBXH-E1
厂家：	M-SYSTEM
描述：	Rack-mounted DCS Signal Conditioners 18K-RACK DCS 分布式控制系统
文件：	总5页 (文件大小：150K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 18KBXH

Rack-mounted DCS Signal Conditioners 18K-RACK

RELATED PRODUCTS

• Blank filler plate (model: P-181)

• Connector terminal block (model: CNT)

• Special cable with 40-pin connector (model: FCN)

STANDARD RACK

Functions & Features

• Housing for storage of Rack-mounted DCS Signal

Conditioners 18K-RACK

GENERAL SPECIFICATIONS

Construction: Metal plates assembly

Coating: Colored Zn-Cr

• Integrated rack and field terminals allow for signal

conditioners to be removed without touching the terminal

screws, making field wiring insulation tests possible

• Signal conditioner power via the rear rack bus for all 8

modules

Capacity: 8 positions

Connection

Power input: M4 screw terminals (torque 0.8 N·m)

Field terminal: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal

• Connectors are available for direct connection to DCS

units of various manufacturers

• Mounting bracket position selectable

Power: Nickel-plated brass

Field terminal: Nickel-plated steel

Isolation: I/O connector to field terminal to power to FG

INSTALLATION

Power supply: Operational voltage range: 24 V DC ±10%

Ripple 10 % p-p max. @ ≥ 1.3 A

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Rack or Surface

Weight: 1.8 kg (4.0 lb)

MODEL: 18KBXH–[1][2]

PERFORMANCE

ORDERING INFORMATION

• Code number: 18KBXH-[1][2]

Specify a code from below for each [1] and [2].

(e.g. 18KBXH-E1/W)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(I/O connector to field terminal to power)

1000 V AC @ 1 minute (I/O connector or field terminal or

power to FG)

[1] CONNECTOR

0: None

U1: Fujitsu FCN type I/O connector

E1: For Toshiba DCS SAMP1 card use

E3: For Toshiba DCS SAIN1, SAI06 and SAO06 card use

(Panasonic AXM220011 used)

(DISCONTINUED; replace with code "E3A".)

E3A: Toshiba DCS SAIN1, SAI06, SA006 card supported

(Omron XG4A-2034 used)

E4: For Toshiba DCS SAIN1 card use

M-System guarantees the connecting section.

[2] OPTIONS

Mounting Bracket

blank: Rack mounting, standard

/W: Surface mounting

http://www.m-system.co.jp/

18KBXH SPECIFICATIONS

ES-0493 Rev.1 Page 1/5

MODEL: 18KBXH

MOUNTING REQUIREMENTS unit: mm (inch)

273 (10.75)

255 (10.04)

4−M5

ANGLE BRACKET

Note: Leave an appropriate amount of space above/below

the rack for wiring.

*100 (3.94) for JIS standard

CONNECTION DIAGRAM

CN1

CN2

POWER

−

Note : CN1 and CN2 are not provided without connector.

http://www.m-system.co.jp/

18KBXH SPECIFICATIONS

ES-0493 Rev.1 Page 2/5

MODEL: 18KBXH

DIMENSIONS unit: mm (inch)

SURFACE MOUNTING (Option: /W)

RACK MOUNTING, STANDARD (Option: blank)

243 (9.57)

6 7 8

CN1

CN2

CONNECTOR

2 3 4 5 6 7 8

3-M4 POWER TERMINAL

273 (10.75)

288 (11.34)

32-M3.5 FIELD TERMINAL *

8.2 (.32)

* Field I/O Terminal Block

1ch

7ch

8ch

I/O CONNECTOR PIN ASSIGNMENT

FUJITSU FCN TYPE I/O CONNECTOR

FOR TOSHIBA SAMP1 CARD USE

Location

Connector Pin Assignment

Output Connector: Hirose Electric HIF3BA-40PA-2.54DS (11)

CN1: For SAMP1

I/O Connector: Fujitsu FCN-365P40-AU

CN1: Output 1 or input

CN2: Output 2

CN2: For SAMP1 (for redundancy)

18K-RACK Location No.

PIN NO.

ASSIGNMENT

ch.1 +

PIN NO.

ASSIGNMENT

ch.1 −

ch.2 +

ch.2 −

CN1, CN2

ch.3 +

ch.3 −

ch.4 +

ch.4 −

SAMP1 Input No.

ch.5 +

ch.5 −

ch.6 +

ch.6 −

ch.7 +

ch.7 −

ch.8 +

ch.8 −

A9 - A20, B9 - B20 are not in use

Pin assignment is common to both CN1 and CN2

http://www.m-system.co.jp/

18KBXH SPECIFICATIONS

ES-0493 Rev.1 Page 3/5

MODEL: 18KBXH

¢ TOSHIBA DCS SAIN1 CARD USE

FOR TOSHIBA DCS SAIN1, SAI06 AND SAO06 CARD USE

Location

I/O Connector: Omron XG4A-2034

Output Connector: Hirose Electric HIF3BA-20PA-2.54DS (11)

CN1: SAIN1, SAI06, SAO06 (ch.1 - ch.8)

CN2: SAIN1, SAI06, SAO06 (ch.1 - ch.8) (for redundancy)

CN1: SAIN1 (ch.1 - ch.8)

18K-RACK Location No.

CN2: SAIN1 (ch.1 - ch.8) (for redundancy)

18K-RACK Location No.

CN1, CN2

SAIN1, SAI06, SAO06 I/O No.

SAIN1 I/O No.

Connector Pin Assignment

PIN NO.

ASSIGNMENT

ch.1 +

ch.1 −

ch.2 +

ch.2 −

ch.3 +

ch.3 −

ch.4 +

ch.4 −

ch.5 +

ch.5 −

ch.6 +

ch.6 −

ch.7 +

ch.7 −

ch.8 +

ch.8 −

Connector Pin Assignment

PIN NO.

ASSIGNMENT

ch.1 +

ch.1 −

ch.2 +

ch.2 −

ch.3 +

ch.3 −

ch.4 +

ch.4 −

ch.5 +

ch.5 −

ch.6 +

ch.6 −

ch.7 +

ch.7 −

ch.8 +

ch.8 −

Pin assignment is common to both CN1 and CN2

The signal that is connected to the connector is the input signal

Pin assignment is common to both CN1 and CN2

or the output signal 1.

The signal that is connected to the connector is the input signal

or the output signal 1.

Toshiba DCS SAMP1 uses Panasonic AXM220001. As connec-

tor is discontinued, Omron XG4A-2034 is used as an alternative.

(Replace cable side.)

http://www.m-system.co.jp/

18KBXH SPECIFICATIONS

ES-0493 Rev.1 Page 4/5

MODEL: 18KBXH

Specifications are subject to change without notice.

http://www.m-system.co.jp/

18KBXH SPECIFICATIONS

ES-0493 Rev.1 Page 5/5

相关型号：