18RK-366-R/BL [MSYSTEM]

Rack-mounted DCS Signal Conditioners 18-RACK;


型号：	18RK-366-R/BL
厂家：	M-SYSTEM
描述：	Rack-mounted DCS Signal Conditioners 18-RACK DCS 分布式控制系统
文件：	总3页 (文件大小：94K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 18RK

Rack-mounted DCS Signal Conditioners 18-RACK

OUTPUT 1

Voltage

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

RTD CONVERTER

(fast response)

Functions & Features

[2] OUTPUT 2

• Accepting direct input from an RTD and providing two

standard process signals

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

• Linearization

• Burnout protection

6: 1 – 5 V DC (Load resistance 2000 Ω min.)

• Second channel output available at the front terminals

and at the Standard Rack connector

• Fast response type

POWER INPUT

DC Power

R: 24 V DC

Typical Applications

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Converting into standard signals

• Power plant

[3] OPTIONS

Burnout

blank: Upscale burnout

/BL: Downscale burnout

GENERAL SPECIFICATIONS

Construction: Rack-mounted; terminal access via screw

terminals on the front and connector on the rear; terminal

cover provided

Connection

MODEL: 18RK–[1]6[2]–R[3]

Input: M3.5 screw terminals (torque 0.8 N·m)

Output 1: Connector

Output 2: M3.5 screw terminals (torque 0.8 N·m)

and connector

ORDERING INFORMATION

• Code number: 18RK-[1]6[2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. 18RK-166-R/BL)

Power input: Supplied from connector

Screw terminal: Nickel-plated steel

Isolation: Input to output 1 to output 2 to power

Overrange output: Approx. -10 to +120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Linearization: Standard

• Temperature range (e.g. 0 – 100°C)

[1] INPUT RTD (2- or 3-wire)

1: JPt 100 (JIS'89)

(Usable range: -200 to +500°C, -328 to +932°F; min.span: 30°C, 54°F)

3: Pt 100 (JIS'89)

INPUT SPECIFICATIONS

Maximum leadwire resistance: 20 Ω per wire (3-wire)

Sensing current: 2 mA

(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 30°C, 54°F)

4: Pt 100 (JIS'97, IEC)

(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 30°C, 54°F)

5: Pt 50 Ω (JIS'81)

(Usable range: -200 to +500°C, -328 to +932°F; min.span: 60°C, 108°F)

6: Ni 508.4 Ω

(Usable range: -50 to +200°C, -58 to +392°F; min.span: 20°C, 36°F)

0: Specify

Note: Consult M-System for 2-wire RTD

18RK SPECIFICATIONS

ES-1822 Rev.1 Page 1/3

http://www.m-system.co.jp/

MODEL: 18RK

INSTALLATION

Current consumption: Approx. 35 mA with voltage output

Approx. 65 mA with current output

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Standard Rack 18BXx or 18KBXx

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.2 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Approx. 25 msec. (0 – 90 %)

Burnout response: ≤ 10 sec.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(input to output 1 or output 2 or power)

500 V AC @ 1 minute

(output 1 to output 2 to power)

1500 V AC @ 1 minute

(input or output or power to ground)

EXTERNAL DIMENSIONS unit: mm (inch)

2–M3

SCREW

8–M3.5

7 (.28)

SCREW

7 (.28)

24 (.94)

32 (1.26)

78 (3.07)

TERMINAL ASSIGNMENTS

18RK SPECIFICATIONS

ES-1822 Rev.1 Page 2/3

http://www.m-system.co.jp/

MODEL: 18RK

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Burnout

RTD

Isolation

Differential

Amplifier

Voltage/

Duty Cycle

Output

Driver

–

Linearizer

OUTPUT 2

Reference

Resistor

Constant

Current

Output

Driver

OUTPUT 1

OUTPUT 2

POWER

For OUTPUT 2 with current output, use either of terminals on the front or connector on the rear.

Specifications are subject to change without notice.

18RK SPECIFICATIONS

ES-1822 Rev.1 Page 3/3

http://www.m-system.co.jp/

相关型号：