40DPT-V5-K3/Q [MSYSTEM]

Digital Panel Meters 40 Series;


型号：	40DPT-V5-K3/Q
厂家：	M-SYSTEM
描述：	Digital Panel Meters 40 Series
文件：	总7页 (文件大小：260K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 40DPT

R: 24 V DC

Digital Panel Meters 40 Series

(Operational voltage range 24 V ±20 %, ripple 10 %p-p max.)

AC VOLTAGE INPUT DIGITAL PANEL METER

(4 digit, process meter, true RMS sensing)

Functions & Features

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

• 4 digit (±9999) panel meter

• Scaling and HOLD functions

• High visible, 0.8" (20.3mm) high and bright LED

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

Moving parts and indicators are not coated.

/C01: Silicone coating

96 (3.78)

/C02: Polyurethane coating

/C03: Rubber coating

EX-FACTORY SETTING

(1.89)

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9537)

96 (3.78)

mm (inch)

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

Connection: M3 screw terminals (torque 0.6 N·m)

Solderless terminal: Refer to the drawing at the end of the

section.

MODEL: 40DPT–[1]–[2][3]

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

ORDERING INFORMATION

• Code number: 40DPT–[1]–[2][3]

Specify a code from below for each of [1] through [3].

(e.g. 40DPT-V1-K3/Q)

Applicable wire size: 0.25 to 1.65 mm

(AWG 22 to 16)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (gray)

Isolation: Input to power

Input waveform

• Specify the specification for option code /Q

(e.g. /C01/SET)

RMS sensing: Up to 15 % of 3rd harmonic content

Sampling rate: 10 times/sec. (100 msec.)

Averaging: None or moving average

Setting: (Front button)

[1] INPUT

Voltage

V1: 0.0 - 200.0 mV AC (Conformance range)

(Input range: 0.0 – 240.0 mV AC, Input resistance: ≥100 kΩ)

V2: 0.000 - 2.000 V AC (Conformance range)

(Input range: 0.000 – 2.400 V AC, Input resistance: ≥1 MΩ)

V3: 0.00 - 20.00 V AC (Conformance range)

(Input range: 0.00 – 24.00 V AC, Input resistance: ≥1 MΩ)

V4: 0.0 - 200.0 V AC (Conformance range)

(Input range: 0.0 – 240.0 V AC, Input resistance: ≥1 MΩ)

V5: 0.0 - 400.0 V AC (Conformance range)

(Input range: 0.0 – 480.0 V AC, Input resistance: ≥1 MΩ)

(CE not available)

• Scaled range

• Low-end cutout

• Moving average

• Brightness

• Others

■Recommended solderless terminal

3.3 (.13) max

mm (inch)

[2] POWER INPUT

AC Power

K3: 100 – 120V AC

(Operational voltage range 85 - 132 V, 47 - 66 Hz)

L3: 200 – 240V AC

(Operational voltage range 170 - 264 V, 47 - 66 Hz)

DC Power

40DPT SPECIFICATIONS

ES-9537 Rev.7 Page 1/7

https://www.m-system.co.jp/

MODEL: 40DPT

(input to power to ground)

DISPLAY

Display: 4 digits of 20.3 mm (0.8 inch) height, 7-segment,

red LED

STANDARDS & APPROVALS

EU conformity:

Display range: -9999 to 9999

Scaling range: -9999 to 9999 counts

EMC Directive

Decimal point position: 10-1, 10-2, 10-3 or none

Zero indication: Higher-digit zeros are suppressed.

Over-range indication: '-9999' or '9999' blinking for display

values out of the display range. 'S.ERR' blinks surpassing

the permissible range. 'ERR' blinks when input scaling

setting is inappropriate.

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Measurement Category I (input)

Installation Category II (power)

Pollution degree 2

Engineering unit indication: Sticker label attached

DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,

kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,

cm, mm, m, m/sec, mm/min, cm/min, m/min,

Input to power: Reinforced insulation (300 V)

RoHS Directive

m/h, m/s2, inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m3, m3/sec,

/min, m

/h, Nm /h, N·m, N/m , g, kg, kg/h,

N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,

kJ, MJ, rpm, sec, min, pH, %, ppm, etc.

INPUT SPECIFICATIONS

■ AC Input voltage

Frequency: 40 - 100 Hz

Overload capacity: 120 % of max. measurement range

(continuous)

• V1 Max. input: 10 V

• V2 Max. input: 100 V

• V3, V4, V5 Max. input: 500 V

Input burden: ≤ 0.5 VA

■ Hold Input: Dry contact input

Detecting level: ≤ 1.5 V

Sensing: Approx. 5 V DC, 1 mA

INSTALLATION

Power consumption

•AC:

≤ 2.7 VA for 100 – 120 V

≤ 3.4 VA for 200 – 240 V

•DC: ≤ 1.0 W

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Panel flush mounting

Weight: 180 g (0.40 lb)

PERFORMANCE

Input accuracy: ±0.3% rdg ±1digit,

< 35 % of full scale: ±0.3% FS ±1digit

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Line voltage effect: ±0.2 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

40DPT SPECIFICATIONS

ES-9537 Rev.7 Page 2/7

https://www.m-system.co.jp/

MODEL: 40DPT

DISPLAY HOLD COMMAND

Displayed value is held with an external HOLD command input. Connect the contacts across HOLD to COM.

(Isolate with photo-coupler or relay as terminals 3 and 4 are not isolated to input signal, terminals 1 and 2.)

(a)

Photo-Coupler

HOLD

COM

Photo-Coupler

Twisted pair cable

(b)

Relay

HOLD

COM

Relay

Twisted pair cable

EXTERNAL VIEW

(1) Front Panel

(3) 4-digit Display

(4) Polarity Indicator

(8) Up Button

(5) Disp/ Button

(6) Scale/ Button

(2) Sticker Label

(7) Shift Button

■ FUNCTION TABLE

No.

(1)

(2)

(3)

(4)

(5)

COMPONENT

Front panel

FUNCTIONS

Removed at configuration.

Engineering unit label position

Sticker label

4-digit display

Polarity indicator

Disp/ ↓ button

4-digit LED display. Range: 0 to 9999 (not including decimal point)

Turns on when negative value is displayed.

Used to move on to the display setting modes, to shift through setting items in each setting mode,

or shift through display digits in each setting item.

(6)

Used to move on to the scaling setting modes, to shift through setting items in each setting mode,

or shift through display digits in each setting item.

Scale/ ↑ button

(7)

(8)

Shift button

Up button

Used to move on to the setting standby status.

Used to select setting value.

40DPT SPECIFICATIONS

ES-9537 Rev.7 Page 3/7

https://www.m-system.co.jp/

MODEL: 40DPT

PARAMETER LIST

■ SCALING SETTING MODE

ITEM

DISPLAY

DEFAULT

VALUE

INPUT

CODE

DISPLAY

4th LSD – 2nd LSD, none Decimal point position

PARAMETER

FUNCTION

Decimal Point Position

–

Input value to be set as Zero

in the measurement range

Input Scaling Value A

Input Scaling Value B

Display Scaling Value A

)

(

–

Input value to be set as Full

Scale in the measurement

range

)

–

Display value for input

scaling value A

Display value for input

scaling value B

Display Scaling Value B

Low-end cutout OFF

Low-end cutout

–

Low-end cutout ON

Absolute value low-end cutout ON

Low-end cutout value setting

–

Low-end cutout value

–

*1. Only for input code ‘V5’

*2. Input signal less than the preset cutout value is forcibly cut to display scaling value “zero”.

Use when minus value is not required. Lower 3 digits of displayed value are set regardless of decimal point position.

Note: With the low-end cutout or absolute value low-end cutout set to ON, the low-end cutout value setting is valid.

40DPT SPECIFICATIONS

ES-9537 Rev.7 Page 4/7

https://www.m-system.co.jp/

MODEL: 40DPT

• Input scaling

Zero and full scale of input range can be re-configured to user's desired value by entering parameters.

When initialization of setting is executed, these data is lost and return to the default value.

Input Scaling Value A:

Input value for zero point

(Input scaling value A < Input scaling value B)

Enter the value you want to set to zero in the measurement range.

Input Scaling Value B: Input value for full scale point

Enter the value you want to set to full scale in the measurement range.

• Display scaling

Display Scaling Value A:

Display Scaling Value B:

Display value for Input Scaling Value A

Display value for Input Scaling Value B

• Normal Scaling

The display value increases when the input signal increases.

• Inverted Scaling

The display value decreases when the input signal increases.

Display

Full Scale

Zero

Display Scaling

Zero

Full Scale

Input

Input Scaling

Decimal point position: Decimal point position is specified independently from the scaling. When you set the display scaling, include zeros

for fractions.

■ DISPLAY SETTING MODE

DEFAULT

VALUE

PARAMETER

ITEM DISPLAY

DISPLAY

FUNCTION

No moving averaging

Moving Average

Moving average with 2 samples

Moving average with 4 samples

Moving average with 8 samples

Moving average with 16 samples

Brightness level 0 (dark)

Brightness level 1

Brightness

Brightness level 2

Brightness level 3

Brightness level 4

Brightness level 5 (bright)

Non-initialization

Initialization

Initialize settings (change to factory settings) *¹

Version number, indication only

−

Version Indication

–

*1. While “on” is shown, pressing Shift button initializes settings.

When initialization of setting is executed, existing each parameter setings are lost and return to default value.

Be aware that settings does not return to the ex-factory settings specied by /SET option.

40DPT SPECIFICATIONS

ES-9537 Rev.7 Page 5/7

https://www.m-system.co.jp/

MODEL: 40DPT

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

■ TOP VIEW

92 (3.62)

■ FRONT VIEW

■ SIDE VIEW

103 (4.06)

96 (3.78)

85 (3.35)

(.43)

12 (.47)

■ REAR VIEW

10–M3 SCREW

TERMINALS

6.4 (.25)

MOUNTING REQUIREMENTS unit: mm

92 ⁺^{– 0}^0.8

min. 120

Panel thickness: 1.6 to 8.0 mm

40DPT SPECIFICATIONS

ES-9537 Rev.7 Page 6/7

https://www.m-system.co.jp/

MODEL: 40DPT

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SOURCE

Fuse

U(+)

V(–)

POWER

Fuse

A/D

Converter

COM

LOAD

Digital

Computation

HOLD

Display /

Setting

Specifications are subject to change without notice.

40DPT SPECIFICATIONS

ES-9537 Rev.7 Page 7/7

https://www.m-system.co.jp/

40DPT-V5-K3/Q [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E