40DR-R1K3/Q [MSYSTEM]

Digital Panel Meters 40 Series;


型号：	40DR-R1K3/Q
厂家：	M-SYSTEM
描述：	Digital Panel Meters 40 Series
文件：	总6页 (文件大小：201K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 40DR

Digital Panel Meters 40 Series

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

Moving parts and indicators are not coated.

/C01: Silicone coating

RTD INPUT DIGITAL PANEL METER

(4 digits, process meter)

/C02: Polyurethane coating

Functions & Features

/C03: Rubber coating

• 4 digit (±9999) panel meter

• HOLD functions

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9533)

• High visible, 0.8" (20.3mm) high and bright LED

96 (3.78)

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

(1.89)

Connection: M3 screw terminals (torque 0.6 N·m)

Solderless terminal: Refer to the drawing at the end of the

section.

96 (3.78)

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

mm (inch)

Applicable wire size: 0.25 to 1.65 mm

(AWG 22 to 16)

Screw terminal: Nickel-plated steel

MODEL: 40DR–R1–[1][2]

Housing material: Flame-resistant resin (gray)

Isolation: Input to power

A/D conversion: Σ – Δ

ORDERING INFORMATION

• Code number: 40DR–R1–[1][2]

Specify a code from below for each of [1] and [2].

(e.g. 40DR-R1-R/Q)

Sampling rate: 10 times/sec. (100 msec.)

Averaging: None or moving average

Setting: (Front button)

• Specify the specification for option code /Q

(e.g. /C01/SET)

• Temperature unit

• Moving average

• Brightness

• Others

INPUT

■Recommended solderless terminal

R1: Pt 100 (JIS'97, IEC)

3.3 (.13) max

(Usable range -200 to +850°C, -328 to +1562°F)

Pt 100 (JIS'89)

(Usable range -200 to +650°C, -328 to +1202°F)

mm (inch)

[1] POWER INPUT

AC Power

K3: 100 – 120V AC

DISPLAY

(Operational voltage range 85 - 132 V, 47 - 66 Hz)

L3: 200 – 240V AC

Display: 4 digits of 20.3 mm (0.8 inch) height, 7-segment,

red LED

(Operational voltage range 170 - 264 V, 47 - 66 Hz)

DC Power

Display range: -9999 to 9999

Decimal point position: 10–1 or none

Zero indication: Higher-digit zeros are suppressed.

Over-range indication:

R: 24 V DC

(Operational voltage range 24 V ±20 %, ripple 10 %p-p max.)

'S.ERR' blinks surpassing the permissible range.

'B.ERR' blinks at burnout.

[2] OPTIONS

Engineering unit indication: Sticker label attached

DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,

kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,

cm, mm, m, m/sec, mm/min, cm/min, m/min,

blank: none

/Q: With options (specify the specification)

m/h, m/s

, inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m

, m /sec,

m3/min, m3/h, Nm3/h, N·m, N/m2, g, kg, kg/h,

40DR SPECIFICATIONS

ES-9533 Rev.10 Page 1/6

https://www.m-system.co.jp/

MODEL: 40DR

N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,

kJ, MJ, rpm, sec, min, pH, %, ppm, etc.

INPUT SPECIFICATIONS

■ RTD (3-wire)

Maximum leadwire resistance: 10 Ω per wire

Sensing current: Approx. 0.5 mA

Usable range (conformance range):

Pt100 (JIS’97, IEC) -200 to +850℃ or -328 to +1562°F

Pt100 (JIS’89) -200 to +650℃ or -328 to +1202°F

Operational range: -230 to +880℃ or -382 to +1616°F

■ Hold Input: Dry contact input

Detecting level: ≤ 1.5 V

Sensing: Approx. 5 V DC, 1 mA

INSTALLATION

Power consumption

•AC:

Approx. 1.3 VA for 100 – 120 V

Approx. 1.2 VA for 200 – 240 V

•DC: Approx. 0.5 W

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Panel flush mounting

Weight: 160 g (0.35 lb)

PERFORMANCE

Accuracy

-200 – +200°C: ±0.2°C rdg ±1 digit

200 – 850°C: ±0.6°C rdg ±1 digit

-328 – +1562°F: ±1°F rdg ±1 digit

Temp. coefficient: ±0.1 ℃/℃

Line voltage effect: ±1 digit over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @1 minute (input to power to

ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Installation Category II

Pollution Degree 2

Input to power: Reinforced insulation (300 V)

RoHS Directive

40DR SPECIFICATIONS

ES-9533 Rev.10 Page 2/6

https://www.m-system.co.jp/

MODEL: 40DR

DISPLAY HOLD COMMAND

Displayed value is held with an external HOLD command input. Connect the contacts across HOLD to COM.

(a)

(c)

5V–CMOS, TTL

Photo-Coupler

HOLD

COM

HOLD

COM

Photo-Coupler

Twisted pair cable

(b)

Transistor

(d)

Relay

HOLD

COM

HOLD

COM

Relay

Twisted pair cable

EXTERNAL VIEW

(1) Front Panel

(3) 4-digit Display

(4) Polarity Indicator

(8) Up Button

(5) Disp/ Button

(6) Scale/ Button

(2) Sticker Label

(7) Shift Button

■ COMPONENT IDENTIFICATION

No.

(1)

(2)

(3)

(4)

COMPONENT

Front panel

FUNCTIONS

Removed at conguration.

Engineering unit label position

Sticker label

4-digit display

Polarity indicator

4-digit LED display. Range: 0 to 9999 (not including decimal point)

Turns on when negative value is displayed

Used to move on to the display setting modes; or to shift through setting items in each

setting mode.

(5)

(6)

Disp/ button

Scale/ button

Used to move on to the zero & span adjustment modes; or to shift through setting items in

each setting mode.

Used to move on to the setting standby status and shift through display digits in each set-

ting item.

(7)

(8)

Shift button

Up button

Used to select setting value.

40DR SPECIFICATIONS

ES-9533 Rev.10 Page 3/6

https://www.m-system.co.jp/

MODEL: 40DR

PARAMETER LIST

■ ZERO & SPAN ADJUSTMENTS

PARAMETER

DISPLAY

–

FUNCTION

Adjustment value for -200°C

DEFAULT VALUE

Zero adjustment

To distinguish from span adjustment, the "rst decimal point is blink-

ing

Span adjustment

Temperature unit

–

Adjustment value for 850°C

Display in Celsius

Display in Fahrenheit (Temperature range: -328 to +1562°F)*¹

Decimal Point Position

10^-1or none

Decimal point position for celsius

*1. For Fahrenheit, the value is rounded to integer. Decimal point position setting is not available.

■ DISPLAY SETTING MODE

PARAMETER

DISPLAY

FUNCTION

DEFAULT VALUE

Moving Average

No moving averaging

Moving average with 2 samples

Moving average with 4 samples

Moving average with 8 samples

Moving average with 16 samples

Brightness level 1 (dark)

Brightness

Brightness level 2

Brightness level 3

Brightness level 4

Brightness level 5 (bright)

Non-initialization

Initialization

Initialize settings (change to factory settings) *¹

Version Indication

−

Version number, indication only

−

*1. While “

” is shown, pressing Disp/ button or Scale/ button initializes settings.

Activating “initialization”, user’s speci"ed parameters will be deleted and overwritten with the factory default values. Notice that after this,

Ex-factory settings will be irrecoverable.

40DR SPECIFICATIONS

ES-9533 Rev.10 Page 4/6

https://www.m-system.co.jp/

MODEL: 40DR

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

■ TOP VIEW

92 (3.62)

■ FRONT VIEW

■ SIDE VIEW

103 (4.06)

96 (3.78)

85 (3.35)

(.43)

12 (.47)

■ REAR VIEW

10–M3 SCREW

TERMINALS

6.4 (.25)

MOUNTING REQUIREMENTS unit: mm

92 ⁺^{– 0}^0.8

min. 120

Panel thickness: 1.6 to 8.0 mm

40DR SPECIFICATIONS

ES-9533 Rev.10 Page 5/6

https://www.m-system.co.jp/

MODEL: 40DR

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

RTD

U(+)

V(–)

POWER

A/D

Converter

Digital

Computation

HOLD

COM

Display /

Setting

Specifications are subject to change without notice.

40DR SPECIFICATIONS

ES-9533 Rev.10 Page 6/6

https://www.m-system.co.jp/

相关型号：