40DT-T1-K3 [MSYSTEM]

Digital Panel Meters 40 Series;


型号：	40DT-T1-K3
厂家：	M-SYSTEM
描述：	Digital Panel Meters 40 Series
文件：	总6页 (文件大小：201K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 40DT

Digital Panel Meters 40 Series

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

Moving parts and indicators are not coated.

/C01: Silicone coating

THERMOCOUPLE INPUT DIGITAL PANEL METER

(4 digits, process meter)

/C02: Polyurethane coating

Functions & Features

/C03: Rubber coating

• 4 digit (±9999) panel meter

EX-FACTORY SETTING

• HOLD functions

/SET: Preset according to the Ordering Information Sheet

(No. ESU-9535)

• High visible, 0.8" (20.3mm) high and bright LED

96 (3.78)

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

(1.89)

Connection: M3 screw terminals (torque 0.6 N·m)

Solderless terminal: Refer to the drawing at the end of the

section.

96 (3.78)

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

mm (inch)

Applicable wire size: 0.25 to 1.65 mm

(AWG 22 to 16)

Screw terminal: Nickel-plated steel

MODEL: 40DT–T1–[1][2]

Housing material: Flame-resistant resin (gray)

Isolation: Input to power

Cold junction compensation: CJC sensor attached to the

input terminals

ORDERING INFORMATION

• Code number: 40DT–T1–[1][2]

Specify a code from below for each of [1] and [2].

(e.g. 40DT-T1-R/Q)

A/D conversion: Σ – Δ

Sampling rate: 10 times/sec. (100 msec.)

Averaging: None or moving average

Setting: (Front button)

• Specify the specification for option code /Q

(e.g. /C01/SET)

• Input type

• Temperature unit

INPUT

T1:

• Moving average

• Brightness

K (CA) (Usable range -150 to +1370°C, -238 to +2498°F)

J (IC) (Usable range -180 to +1000°C, -292 to +1832°F)

T (CC) (Usable range -170 to +400°C, -274 to +752°F)

R (Usable range 380 to 1760°C, 716 to 3200°F)

• Others

■Recommended solderless terminal

3.3 (.13) max

[1] POWER INPUT

AC Power

mm (inch)

K3: 100 – 120V AC

(Operational voltage range 85 - 132 V, 47 - 66 Hz)

L3: 200 – 240V AC

DISPLAY

(Operational voltage range 170 - 264 V, 47 - 66 Hz)

DC Power

Display: 4 digits of 20.3 mm (0.8 inch) height, 7-segment,

red LED

R: 24 V DC

Display range: -9999 to 9999

(Operational voltage range 24 V ±20 %, ripple 10 %p-p max.)

Minimum display/setting scale: 1°C or 1°F

Zero indication: Higher-digit zeros are suppressed.

Over-range indication:

[2] OPTIONS

blank: none

'S.ERR' blinks surpassing the permissible range.

'B.ERR' blinks at burnout.

/Q: With options (specify the specification)

Engineering unit indication: Sticker label attached

DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,

kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,

40DT SPECIFICATIONS

ES-9535 Rev.10 Page 1/6

https://www.m-system.co.jp/

MODEL: 40DT

cm, mm, m, m/sec, mm/min, cm/min, m/min,

m/h, m/s , inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m , m /sec,

/min, m /h, Nm /h, N·m, N/m , g, kg, kg/h,

STANDARDS & APPROVALS

EU conformity:

EMC Directive

N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J,

kJ, MJ, rpm, sec, min, pH, %, ppm, etc.

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

INPUT SPECIFICATIONS

■ Thermocouple

Installation Category II

Pollution Degree 2

Input to power: Reinforced insulation (300 V)

RoHS Directive

Input resistance: 1 MΩ minimum

Burnout sensing: ≤ 0.1 μA

Usable range (conformance range):

K (CA) -150 to +1370℃ or -238 to +2498°F

J (IC) -180 to +1000℃ or -292 to +1832°F

T (CC) -170 to +400℃ or -274 to +752°F

R 380 to 1760℃ or 716 to 3200°F

Operational range:

K (CA) -180 to +1400℃ or -292 to +2552°F

J (IC) -210 to +1030℃ or -346 to +1886°F

T (CC) -200 to + 430℃ or -328 to +806°F

R 170 to 1790℃ or 338 to 3254°F

■ Hold Input: Dry contact input

Detecting level: ≤ 1.5 V

Sensing: Approx. 5 V DC, 1 mA

INSTALLATION

Power consumption

•AC: Approx. 1.0 VA

•DC: Approx. 0.3 W

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Panel flush mounting

Weight: 210 g (0.46 lb)

PERFORMANCE

Accuracy

K narrow range (-150 – +400°C, -238 – +752°F ):

±1°C rdg ± 1digit, ±2°F rdg ± 1digit

K wide range (400 – 1370°C, 752 – 2498°F):

±3℃ rdg ± 1digit, ±6°F rdg ± 1digit

J: ±1℃ rdg ± 1digit, ±2°F rdg ± 1digit

T: ±1℃ rdg ± 1digit, ±2°F rdg ± 1digit

R: ±3℃ rdg ± 1digit, ±6°F rdg ± 1digit

Cold junction compensation error:

±3°C at 25 ±10°C

±5.4°F at 77 ±18°F

Temp. coefficient: ±0.1 ℃/℃

Line voltage effect: ±2 digits over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @1 minute (input to power to

ground)

40DT SPECIFICATIONS

ES-9535 Rev.10 Page 2/6

https://www.m-system.co.jp/

MODEL: 40DT

DISPLAY HOLD COMMAND

Displayed value is held with an external HOLD command input. Connect the contacts across HOLD to COM.

(a)

(c)

5V–CMOS, TTL

Photo-Coupler

HOLD

COM

HOLD

COM

Photo-Coupler

Twisted pair cable

(b)

Transistor

(d)

Relay

HOLD

COM

HOLD

COM

Relay

Twisted pair cable

EXTERNAL VIEW

(1) Front Panel

(3) 4-digit Display

(4) Polarity Indicator

(8) Up Button

(5) Disp/ Button

(6) Scale/ Button

(2) Sticker Label

(7) Shift Button

■ COMPONENT IDENTIFICATION

No.

(1)

(2)

(3)

(4)

COMPONENT

Front panel

FUNCTIONS

Removed at conguration.

Engineering unit label position

4-digit LED display. Range: 0 to 9999

Turns on when negative value is displayed

Sticker label

4-digit display

Polarity indicator

Used to move on to the display setting modes; or to shift through setting items in each

setting mode.

(5)

(6)

Disp/ button

Scale/ button

Used to move on to the zero & span adjustment modes; or to shift through setting items in

each setting mode.

Used to move on to the setting standby status and shift through display digits in each set-

ting item.

(7)

(8)

Shift button

Up button

Used to select setting value.

40DT SPECIFICATIONS

ES-9535 Rev.10 Page 3/6

https://www.m-system.co.jp/

MODEL: 40DT

PARAMETER LIST

■ ZERO & SPAN ADJUSTMENTS

PARAMETER

Input type

DISPLAY

FUNCTION

DEFAULT VALUE

K thermocouple (usable range -150 to +1370°C, -238 to +2498°F)

J thermocouple (usable range -180 to +1000°C, -292 to +1832°F)

T thermocouple (usable range -170 to +400°C, -274 to +752°F)

R thermocouple (usable range 380 to 1760°C, 716 to 3200°F)

Adjustment value for 0% of measurement range

To distinguish from span adjustment, the "rst decimal point is blink-

ing

Zero adjustment

–

Span adjustment

Temperature unit

Adjustment value for 100% of measurement range

Display in Celsius

Display in Fahrenheit

■ DISPLAY SETTING MODE

PARAMETER

DISPLAY

FUNCTION

DEFAULT VALUE

Moving Average

No moving averaging

Moving average with 2 samples

Moving average with 4 samples

Moving average with 8 samples

Moving average with 16 samples

Brightness level 1 (dark)

Brightness level 2

Brightness

Brightness level 3

Brightness level 4

Brightness level 5 (bright)

CJC sensor Enabled

CJC Sensor

CJC sensor Disabled

Initialization

Non-initialization

Initialize settings (change to factory settings) *¹

Version Indication

−

Version number, indication only

−

*1. While “

” is shown, pressing Disp/ button or Scale/ button initializes settings.

Activating “initialization”, user’s speci"ed parameters will be deleted and overwritten with the factory default values. Notice that after this,

Ex-factory settings will be irrecoverable.

40DT SPECIFICATIONS

ES-9535 Rev.10 Page 4/6

https://www.m-system.co.jp/

MODEL: 40DT

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

■ TOP VIEW

92 (3.62)

■ FRONT VIEW

■ SIDE VIEW

103 (4.06)

96 (3.78)

85 (3.35)

(.43)

12 (.47)

■ REAR VIEW

10–M3 SCREW

TERMINALS

6.4 (.25)

MOUNTING REQUIREMENTS unit: mm

92 ⁺^{– 0}^0.8

min. 120

Panel thickness: 1.6 to 8.0 mm

40DT SPECIFICATIONS

ES-9535 Rev.10 Page 5/6

https://www.m-system.co.jp/

MODEL: 40DT

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Comp. Leadwire

THERMOCOUPLE

–

U(+)

V(–)

POWER

A/D

Converter

CJC

Digital

Computation

HOLD 5

COM

Display /

Setting

Specifications are subject to change without notice.

40DT SPECIFICATIONS

ES-9535 Rev.10 Page 6/6

https://www.m-system.co.jp/

相关型号：