60C-041-K/Q [MSYSTEM]

Field Network Modules 60-UNIT Series;


型号：	60C-041-K/Q
厂家：	M-SYSTEM
描述：	Field Network Modules 60-UNIT Series
文件：	总4页 (文件大小：142K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 60C

Field Network Modules 60-UNIT Series

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

ANALOG I/O MODULE

(CC-Link)

Functions & Features

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Interfacing analog I/O signals from/to 10-RACK or 18-RACK

modules with CC-Link

• Saving power and I/O wiring inside an instrumentation

panel

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

(2.83)

RELATED PRODUCTS

•Special cable (model: MCN34)

(3.15)

PACKAGE INCLUDES...

• Terminating resistor (110 Ω, 0.5 W)

153

(6.02)

mm (inch)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

MODEL: 60C-[1][2]-[3][4]

CC-Link: Euro type connector terminal (applicable wire

size: 0.2 to 2.5 mm , stripped length 7 mm)

ORDERING INFORMATION

• Code number: 60C-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. 60C-161-K/Q)

I/O: 34-pin connector (OMRON XG4A-3434)

Power input: M3.5 screw terminal

Screw terminal: Chromated steel (standard) or stainless

steel

• Specify the specification for option code /Q

(e.g. /C01/S01)

Housing material: Flame-resistant resin (black)

Isolation: I/O to CC-Link to power to FG1

Power indicator: Green LED turns on with power supplied.

[1] NO. OF CHANNELS

04: 4 points

CC-Link COMMUNICATION

CC-Link: Conforms to Version 1.10

Station type: Remote device station

Station No. setting: Rotary switch; 1 – 64

Number of occupied stations:

08: 8 points

16: 16 points

[2] I/O TYPE

1: Input

60C-04 1 station

60C-08 2 stations

2: Output

60C-16 4 stations

Remote I/O (RX, RY) is fixed to 32 points.

Baud rate setting: Rotary switch

[3] POWER INPUT

AC Power

(156kbps(factory setting), 625kbps, 2.5Mbps, 5Mbps,

10Mbps)

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

Transmission cable: Approved for CC-Link

L RUN indicator: Red LED turns on in an normal condition.

L ERR. indicator: Red LED turns on or flashes in an

abnormality; off with wire breakdown.

SD indicator: Red LED turns on when transmitting.

RD indicator: Red LED turns on when receiving.

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

60C SPECIFICATIONS

ES-6602 Rev.10 Page 1/4

http://www.m-system.co.jp/

MODEL: 60C

INPUT SPECIFICATIONS

■ Analog Input

OUTPUT SPECIFICATIONS

■ Analog Output

Input range: 1 – 5 V DC

Output must be isolated with signal conditioners.

When the transmission line is open, the last value sampled

before failure is held.

Input resistance: ≥ 1 MΩ

10-RACK and 18-RACK I/O modules must be isolated types.

Non-isolated modules such as 10BW and 18BW are not

usable.

Output range: 1 – 5 V DC

Load resistance: 20 kΩ minimum

A/D conversion output: Signed binary

Signal range 0 – 100 % is converted into hexadecimal 0000

– 2710 (0 – 10000). -15 to 0 % is a negative range

represented by 2's complements.

10-RACK and 18-RACK I/O modules must be isolated types.

Non-isolated modules such as 10BW and 18BW are not

usable.

D/A conversion output: Signed binary

Signal range 0 – 100 % is converted into hexadecimal 0000

– 2710 (0 – 10000). -15 to 0 % is a negative range

represented by 2's complements.

Overall range is represented by hexadecimal FA24 – 2CEC

(-1500 – +11500), for -15 – +115 %.

■ A/D CONVERSION DATA

Overall range is represented by hexadecimal FA24 – 2CEC

(-1500 – +11500), for -15 – +115 %.

■ D/A CONVERSION DATA

14 13 12 11 10

SIGN

BIT

RWr n+0

RWr n+1

RWr n+2

RWr n+3

INPUT 1 A/D CONVERSION DATA

INPUT 2 A/D CONVERSION DATA

INPUT 3 A/D CONVERSION DATA

INPUT 4 A/D CONVERSION DATA

SIGN

BIT

14 13 12 11 10

SIGN

BIT

RWw n+0

RWw n+1

RWw n+2

RWw n+3

OUTPUT 1 D/A CONVERSION DATA

OUTPUT 2 D/A CONVERSION DATA

OUTPUT 3 D/A CONVERSION DATA

OUTPUT 4 D/A CONVERSION DATA

SIGN

BIT

SIGN

BIT

SIGN

BIT

SIGN

BIT

SIGN

BIT

SIGN

BIT

RWr n+7

RWr n+11

RWr n+15

INPUT 8 A/D CONVERSION DATA

INPUT 12 A/D CONVERSION DATA

INPUT 16 A/D CONVERSION DATA

SIGN

BIT

RWw n+7

RWw n+11

RWw n+15

OUTPUT 8 D/A CONVERSION DATA

OUTPUT 12 D/A CONVERSION DATA

OUTPUT 16 D/A CONVERSION DATA

SIGN

BIT

SIGN

BIT

SIGN

BIT

RWr n+0 through RWr n+3 for 4 inputs.

RWr n+0 through RWr n+7 for 8 inputs.

RWr n+0 through RWr n+15 for 16 inputs.

SIGN

BIT

• Input Connector Pin Assignment

RWw n+0 through RWw n+3 for 4 outputs.

RWw n+0 through RWw n+7 for 8 outputs.

RWw n+0 through RWw n+15 for 16 outputs.

PIN NO.

ASSIGNMENT

PIN NO.

ASSIGNMENT

COM

Input

COM

Input 10

Input 11

COM

Input 12

COM

Input 13

COM

Input 14

COM

Input 15

COM

Input 16

COM

No connection

Input 1 – 4 for 4 points, 1 – 8 for 8 points.

60C SPECIFICATIONS

ES-6602 Rev.10 Page 2/4

http://www.m-system.co.jp/

MODEL: 60C

• Output Connector Pin Assignment

PIN NO.

ASSIGNMENT

PIN NO.

ASSIGNMENT

COM

Output

COM

Output 10

Output 11

Output 12

Output 13

Output 14

Output 15

Output 16

No connection

COM

No connection

Output 1 – 4 for 4 points, 1 – 8 for 8 points.

INSTALLATION

Power consumption

•AC: Approx. 4 VA

•DC: Approx. 4 W (160 mA)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail

Weight: 450 g (0.99 lb)

PERFORMANCE in percentage of span

A/D conversion: ±0.1 %

D/A conversion: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Permissible power failure duration: ≤ 10 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (input or output

to CC-Link to power)

2000 V AC @ 1 minute (input or output or CC-Link or power

to FG1)

EXTERNAL VIEW

CN1

Modular Jack

for Factory Calibration

L RUN

L ERR.

Status Indicator LED

I/O Connector

PWR

Power LED

Station No. Setting

Baud Rate Setting

Euro Type Connector Terminal

for CC-Link

60C SPECIFICATIONS

ES-6602 Rev.10 Page 3/4

http://www.m-system.co.jp/

MODEL: 60C

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–4.5 (.18) dia.

MTG HOLE

25 (.98) deep

15 10

14–M3.5

SCREW

72 (2.83)

(.55)

109 (4.29)

139 (5.47)

60 (2.36)

72 (2.83)

38 (1.50)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

COMMUNICATION MODULE

INDICATOR ROTARY

Terminator

LED

To 10-RACK,

18-RACK etc.

To Other

CC-Link

Devices

CC-Link

INTERFACE

SLD

A / D

D / A

Conv.

I / O

CPU

Modular Jack

for Factory

Calibration

MODULAR JACK

SERIAL

TRANSMISSION

LINE

U(+)

V(–)

FG1

POWER

*Attach the terminating resistor when the module is

at the termination of a transmission line.

■ COMMUNICATION CABLE CONNECTIONS

MASTER UNIT

ANALOG I/O MODULE

I/O UNIT

TERMINATOR

blue

white

yellow

SLD

Specifications are subject to change without notice.

60C SPECIFICATIONS

ES-6602 Rev.10 Page 4/4

http://www.m-system.co.jp/

相关型号：