60D-042-K [MSYSTEM]

Field Network Modules 60-UNIT Series;


型号：	60D-042-K
厂家：	M-SYSTEM
描述：	Field Network Modules 60-UNIT Series
文件：	总4页 (文件大小：140K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 60D

Field Network Modules 60-UNIT Series

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

ANALOG I/O MODULE

(DeviceNet)

Functions & Features

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Interfacing analog I/O signals from/to 10-RACK or 18-RACK

modules with DeviceNet

• Saving power and I/O wiring inside an instrumentation

panel

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

(2.83)

(3.15)

RELATED PRODUCTS

•Special cable (model: MCN34)

• Programming Unit (model: PU-2x)

153

(6.02)

GENERAL SPECIFICATIONS

Construction: Plug-in

mm (inch)

Connection

DeviceNet: Euro type connector terminal (applicable

MODEL: 60D-[1][2]-[3][4]

wire size: 0.2 to 2.5 mm , stripped length 7 mm)

I/O: 34-pin connector (OMRON XG4A-3434)

Power input: M3.5 screw terminal

ORDERING INFORMATION

• Code number: 60D-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. 60D-161-K/Q)

Screw terminal: Chromated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: I/O to DeviceNet to power to FG1

Power indicator: Green LED turns on with power supplied.

• Specify the specification for option code /Q

(e.g. /C01/S01)

DeviceNet COMMUNICATION

Transmission cable: Approved for DeviceNet

Node address setting: DIP switch; 00 – 63

Baud rate setting: DIP switch

[1] NO. OF CHANNELS

04: 4 points

08: 8 points

16: 16 points

MS (Module Status) indicator: Bi-color (green/red) LED

indicates device status.

[2] I/O TYPE

1: Input

NS (Network Status) indicator: Bi-color (green/red)

LED indicates status of the communication link.

2: Output

INPUT SPECIFICATIONS

■ Analog Input

[3] POWER INPUT

AC Power

Input range: 1 – 5 V DC

K: 85 – 132 V AC

Input resistance: ≥ 1 MΩ

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

10-RACK and 18-RACK I/O modules must be isolated types.

Non-isolated modules such as 10BW and 18BW are not

usable.

(CE not available)

DC Power

R: 24 V DC

A/D conversion output: 16-bit binary

Signal range 0 – 100 % is converted into hexadecimal 0000

– 1770 (0 – 6000). -15 to 0 % is represented by 2’s

complements.

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Overall range is represented by hexadecimal FC7C – 1AF4

60D SPECIFICATIONS

ES-6604 Rev.15 Page 1/4

https://www.m-system.co.jp/

MODEL: 60D

(-900 – +6900), for -15 – +115 %.

• Output Connector Pin Assignment

Note: In the firmware version 3.00 or later, analog input

range 0 – 100% can be converted into hexadecimal 0000 –

2710 (0 – 10000).

PIN NO.

ASSIGNMENT

PIN NO.

ASSIGNMENT

COM

Output

COM

In addition, negative values of analog input range -15 to 0%

can be converted into signed absolute values.

Refer to the instruction manual for details.

COM

• Input Connector Pin Assignment

COM

PIN NO.

ASSIGNMENT

PIN NO.

ASSIGNMENT

COM

Input

Output 10

Output 11

Output 12

Output 13

Output 14

Output 15

Output 16

No connection

COM

No connection

COM

Output 1 – 4 for 4 points, 1 – 8 for 8 points.

Input 10

Input 11

COM

Input 12

COM

INSTALLATION

Power consumption

Input 13

COM

Input 14

COM

•AC: Approx. 4 VA

Input 15

COM

•DC: Approx. 4 W (160 mA)

Input 16

COM

No connection

Supply voltage to network: 11 – 25 V DC supplied through

the network terminal block

Input 1 – 4 for 4 points, 1 – 8 for 8 points.

Supply current to network: 60 mA max. @ 24 V

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail

OUTPUT SPECIFICATIONS

■ Analog Output

Output must be isolated with signal conditioners.

When the transmission line is open, the last value sampled

before failure is held.

Weight: 450 g (0.99 lb)

Output range: 1 – 5 V DC

Load resistance: 20 kΩ minimum

PERFORMANCE in percentage of span

A/D conversion: ±0.1 %

10-RACK and 18-RACK I/O modules must be isolated types.

Non-isolated modules such as 10BW and 18BW are not

usable.

D/A conversion: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Permissible power failure duration: ≤ 10 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (input or output

to DeviceNet to power)

D/A conversion output: 16-bit binary

Signal range 0 – 100 % is converted into hexadecimal

0000 – 1770 (0 – 6000). -15 to 0 % is represented by 2’s

complements.

Overall range is represented by hexadecimal FC7C – 1AF4

(-900 – +6900), for -15 – +115 %.

2000 V AC @ 1 minute (input or output or DeviceNet or

power to FG1)

Note: In the firmware version 3.00 or later, analog output

range 0 – 100% can be converted into hexadecimal 0000 –

2710 (0 – 10000).

STANDARDS & APPROVALS

EU conformity:

In addition, negative values of analog output range -15 to

0% can be converted into signed absolute values.

Refer to the instruction manual for details.

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

60D SPECIFICATIONS

ES-6604 Rev.15 Page 2/4

https://www.m-system.co.jp/

MODEL: 60D

EXTERNAL VIEW

PU-2x Modular Jack

Power LED

CN1

MS Indicator LED

NS Indicator LED

I/O Connector

PWR

Euro Type Connector Terminal

for DeviceNet

NA0

NA1

NA2

NA3

NA4

NA5

DR0

DR1

Node

Address

Setting

Baud Rate

Setting

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–4.5 (.18) dia.

MTG HOLE

25 (.98) deep

15 10

14–M3.5

SCREW

72 (2.83)

(.55)

109 (4.29)

139 (5.47)

60 (2.36)

72 (2.83)

38 (1.50)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

60D SPECIFICATIONS

ES-6604 Rev.15 Page 3/4

https://www.m-system.co.jp/

MODEL: 60D

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FG1 terminal to ground.

Caution: FG1 terminal is NOT a protective conductor terminal.

COMMUNICATION MODULE

INDICATOR

LED

DIP SW

V+

CAN_H

Drain

CAN_L

V–

To 10-RACK, 18-RACK etc.

To Other

DeviceNet

Devices

DeviceNet

Comm. CPU

A / D

D / A

Conv.

I / O

CPU

MODULAR JACK

PU-2x

SERIAL

TRANSMISSION

LINE

U(+)

POWER

V(–)

FG1

■ CABLE IDENTIFICATION

The following table defines wire insulation colors and

designations. The terminal block is labeled also in

the same colors so that the correct assignment can

be confirmed.

COLOR

black

blue

DESIG.

V –

DESCRIPTION

Power (–)

CAN_L

Drain

CAN_H

V +

Signal Low

Shield

bare

white

red

Signal High

Power (+)

Specifications are subject to change without notice.

60D SPECIFICATIONS

ES-6604 Rev.15 Page 4/4

https://www.m-system.co.jp/

相关型号：