61A-042-R [MSYSTEM]

Field Network Modules 61-UNIT Series;


型号：	61A-042-R
厂家：	M-SYSTEM
描述：	Field Network Modules 61-UNIT Series
文件：	总3页 (文件大小：100K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 61A

Field Network Modules 61-UNIT Series

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

ANALOG I/O MODULE

(conforms to AnyWire wiring saving system)

Functions & Features

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Interfacing analog I/O signals from/to Mini-M or Pico-M

modules with AnyWire wiring saving systems

• Saving power and I/O wiring inside an instrumentation

panel

/C02: Polyurethane coating

/C03: Rubber coating

(1.97)

RELATED PRODUCTS

• Installation Base (model: M2BS2)

• Installation Base (model: M8BS2)

100 (3.94)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

115 (4.53)

mm (inch)

AnyWire: Euro type connector terminal (applicable wire

size: 0.2 to 2.5 mm , stripped length 7 mm)

I/O: Via Installation Base (model: MxBS2)

Power input: Via Installation Base (model: MxBS2)

Housing material: Flame-resistant resin (black)

Isolation: I/O to AnyWire to power

MODEL: 61A-[1][2]-[3][4]

Power indicator: Green LED turns on with power supplied.

ORDERING INFORMATION

• Code number: 61A-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. 61A-161-K/Q)

AnyWire SPECIFICATIONS

Network: Conforms to AnyWire wiring saving system

Transmission media

• Specify the specification for option code /Q

(e.g. /C01)

• General-purpose 2-core / 4-core cable (0.75 - 1.25 mm )

• General-purpose wiring (0.75 - 1.25 mm

2) etc.

Station No.: DIP switch; 00 - 3F

[1] NO. OF CHANNELS

04: 4 points

Transmission clock / maximum transmission distance

(configurable with DIP switch(es))

08: 8 points

• 7.8 kHz / 800 m (874.9 yds)

16: 16 points

• 15.6 kHz / 500 m (546.8 yds)

• 31.3 kHz / 200 m (218.7 yds)

[2] I/O TYPE

1: Input

• 62.5 kHz / 100 m (109.4 yds)

RDY indicator: Red LED ON at normal operating

LINK indicator: Red LED blinking at normal operating

2: Output

[3] POWER INPUT

AC Power

INPUT SPECIFICATIONS

■ Analog Input

K: 85 – 132 V AC

Input range: 1 – 5 V DC

Input resistance: ≥ 1 MΩ

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

DC Power

(Each input must be isolated by signal conditioners. Non-

R: 24 V DC

isolated modules such as M2BW and M8BW are not usable.)

A/D conversion

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

(Specify power suffix code R (24 V DC) when the UNIT is to be

combined with the M8BS2.)

Moving averaging: 4 samples

Sampling rate: 160 ms

A/D conversion output: Signed binary

61A SPECIFICATIONS

ES-6639 Rev.2 Page 1/3

http://www.m-system.co.jp/

MODEL: 61A

Signal range 0 – 100 % is converted into hexadecimal 0000

– 2710 (0 – 10000). -15 to 0 % is a negative range

represented by 2's complements.

Overall range is represented by hexadecimal FA24 – 2CEC

(-1500 – +11500), for -15 – +115 %.

OUTPUT SPECIFICATIONS

■ Analog Output

Output range: 1 – 5 V DC

Load resistance: 20 kΩ minimum

(Output must be isolated with signal conditioners.

When the transmission line is open, the last value sampled

before failure is held. Non-isolated modules such as M2BW

and M8BW are not usable. )

D/A conversion input: Signed binary

Signal range 0 – 100 % is converted into hexadecimal

0000 – 2710 (0 – 10000).

-15 to 0 % is a negative range represented by 2's

complements.

Overall range is represented by hexadecimal FA24 – 2CEC

(-1500 – +11500), for -15 – +115 %.

INSTALLATION

Power consumption

•AC: Approx. 4 VA

•DC: Approx. 4 W (160 mA)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: MxBS2)

Weight: 250 g (0.55 lb)

PERFORMANCE in percentage of span

A/D conversion: ±0.1 %

D/A conversion: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Permissible power failure duration: ≤ 10 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (I/O to AnyWire

to power)

EXTERNAL VIEW

Modular Jack

for Factory Calibration

Power Indicator LED

PWR

Status Indicator LED

RDY

LINK

Euro Type Connector Terminal

for AnyWire

Transmission Setting

61A SPECIFICATIONS

ES-6639 Rev.2 Page 2/3

http://www.m-system.co.jp/

MODEL: 61A

EXTERNAL DIMENSIONS unit: mm (inch)

2–M3 SCREWS

(.47)

50 (1.97)

38 min.

(1.50)

103 (4.06)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Transmission

Indicator

Setting

LED

−

AnyWire

Interface

To other AnyWire devices

A/D

D/A

Converter

To Installation Base

I/O Side

CPU

Modular Jack

for Factory

Calibration

MODULAR

JACK

SERIAL

TRANSMISSION

LINE

Refer to the manual of the AnyWire device to be connected

for explanations how to connect the device.

Specifications are subject to change without notice.

61A SPECIFICATIONS

ES-6639 Rev.2 Page 3/3

http://www.m-system.co.jp/

相关型号：