61F-082-R [MSYSTEM]

Field Network Modules 61-UNIT Series;


型号：	61F-082-R
厂家：	M-SYSTEM
描述：	Field Network Modules 61-UNIT Series
文件：	总3页 (文件大小：100K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: 61F

Field Network Modules 61-UNIT Series

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

ANALOG I/O MODULE

(Fuji Electric T-Link use)

Functions & Features

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Interfacing analog I/O signals from/to Mini-M or Pico-M

modules with T-LINK

• Saving power and I/O wiring inside an instrumentation

panel

/C02: Polyurethane coating

/C03: Rubber coating

RELATED PRODUCTS

• Installation Base (model: M2BS2)

• Installation Base (model: M8BS2)

(1.97)

100

(3.94)

GENERAL SPECIFICATIONS

Construction: Plug-in

₁2

Connection

T-Link: Euro type connector terminal (applicable wire

115 (4.53)

mm (inch)

size: 0.2 to 2.5 mm , stripped length 7 mm)

I/O: Via Installation Base (model: MxBS2)

Power input: Via Installation Base (model: MxBS2)

Housing material: Flame-resistant resin (black)

Isolation: I/O or T-Link to power

MODEL: 61F-[1][2]-[3][4]

Power indicator: Green LED turns on with power supplied.

ORDERING INFORMATION

• Code number: 61F-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. 61F-161-K/Q)

T-Link SPECIFICATIONS

Configuration: Multi-drop

Communication: Half-duplex

Baud rate: 500 kbps

• Specify the specification for option code /Q

(e.g. /C01)

Transmission media/distance:

KPEV-SB 0.75 mm

× 1 pair, 700 m

× 1 pair, 1000 m

T-KPEV-SB, 1.25 mm

[1] NO. OF CHANNELS

04: 4 points

Station No.: Rotary switch; 00 - 99

(Factory default setting: 00)

08: 8 points

L RUN indicator: Red LED ON at normal communication

L ERR. indicator: Red LED ON/blinking at communication

abnormality

16: 16 points

[2] I/O TYPE

1: Input

L I/O indicator: Red LED blinking at normal I/O

L COM indicator: RED LED blinking at T-Link normal

communication

2: Output

■ NUMBER OF CONNECTABLE UNITS WITH T-LINK

Up to a maximum of 32 T-LINK devices can be connected in

a single T-LINK system. There is a limit of 100 words in

processor memory. Make sure that the configured word

area to be occupied does not exceed the 100-word range.

(According to the Fuji Electric MICREX-F Users Manual)

It is necessary to consider these criteria when connecting to

this device.

[3] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

(Specify power suffix code R (24 V DC) when the UNIT is to be

combined with the M8BS2.)

The below describes the number of words occupied per

device by number of modules.

61F SPECIFICATIONS

ES-6635 Rev.2 Page 1/3

http://www.m-system.co.jp/

MODEL: 61F

• For input 4 / output 4 modules: 4

• For input 8 / output 8 modules: 8

• For input 16 / output 16 modules: 16

Permissible power failure duration: ≤ 10 msec.

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (I/O or T-Link to

power)

INPUT SPECIFICATIONS

■ Analog Input

Input range: 1 – 5 V DC

Input resistance: ≥ 1 MΩ

(Each input must be isolated by signal conditioners. Non-

isolated modules such as M2BW and M8BW are not usable.)

A/D conversion

Moving averaging: 4 samples

Sampling rate: 160 ms

A/D conversion output: Signed binary

Signal range 0 – 100 % is converted into hexadecimal 0000

– 2710 (0 – 10000). -15 to 0 % is a negative range

represented by 2's complements.

Overall range is represented by hexadecimal FA24 – 2CEC

(-1500 – +11500), for -15 – +115 %.

OUTPUT SPECIFICATIONS

■ Analog Output

Output range: 1 – 5 V DC

Load resistance: 20 kΩ minimum

(Output must be isolated with signal conditioners.

When the transmission line is open, the last value sampled

before failure is held. Non-isolated modules such as M2BW

and M8BW are not usable. )

D/A conversion input: Signed binary

Signal range 0 – 100 % is converted into hexadecimal

0000 – 2710 (0 – 10000).

-15 to 0 % is a negative range represented by 2's

complements.

Overall range is represented by hexadecimal FA24 – 2CEC

(-1500 – +11500), for -15 – +115 %.

INSTALLATION

Power consumption

•AC: Approx. 3 VA

•DC: Approx. 4 W (160 mA)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: MxBS2)

Weight: 250 g (0.55 lb)

PERFORMANCE in percentage of span

A/D conversion: ±0.1 %

D/A conversion: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

61F SPECIFICATIONS

ES-6635 Rev.2 Page 2/3

http://www.m-system.co.jp/

MODEL: 61F

EXTERNAL VIEW

Modular Jack

for Factory Calibration

PU-2

RUN

ERR.

I/O

Status Indicator LED

Power Indicator LED

Station No. Setting

COM

PWR

STATION NO.

Euro Type Connector Terminal

for T-Link

EXTERNAL DIMENSIONS unit: mm (inch)

2–M3 SCREWS

(.47)

50 (1.97)

38 min.

(1.50)

103 (4.06)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Station No. Setting

Rotary Switches

Indicator

LED

SHIELDED

TWISTED-PAIR

−

CPU For T-LINK

Transmission

To other T-Link devices

A/D

D/A

Converter

RT+

RT−

To Installation Base

JUMPER PIN

I/O Side

CPU

TERMINATING

RESISTOR

Modular Jack

for Factory

Calibration

MODULAR

JACK

SERIAL

TRANSMISSION

LINE

* When the unit is located at the end of transmission line via twisted-pair cable (= no cross-wiring),

short across terminals RT+, RT- with the jumper pin (or wire) provided with the unit.

Remove the jumper pin for the one not located at the end.

Note: Use T1, T2, SD terminals for cross-wiring.

Specifications are subject to change without notice.

61F SPECIFICATIONS

ES-6635 Rev.2 Page 3/3

http://www.m-system.co.jp/

相关型号：