B3FT-1/UL [MSYSTEM]
Space-saving Two-wire Signal Conditioners B3-UNIT;型号: | B3FT-1/UL |
厂家: | M-SYSTEM |
描述: | Space-saving Two-wire Signal Conditioners B3-UNIT |
文件: | 总4页 (文件大小:133K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: B3FT
/Q: Option other than the above (specify the specification)
Space-saving Two-wire Signal
Conditioners B3-UNIT
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
THERMOCOUPLE TRANSMITTER
(field-configurable)
/C02: Polyurethane coating
Functions & Features
/C03: Rubber coating (UL not available)
• Converts a thermocouple input into an isolated, linearized
4 – 20 mA DC signal
• DIP switch configurable input range
• Cold junction compensation, linearization and burnout
• Monitor terminals
GENERAL SPECIFICATIONS
Construction: Small-sized front terminal structure
Connection: Euro type connector terminal
• High-density mounting
(applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm)
2
Housing material: Flame-resistant resin (gray)
Isolation: Input to output
18 (.71)
Burnout: Upscale (default), downscale or no burnout
selectable
Linearization: Standard
Cold junction compensation: CJC sensor attached to the
106
(4.17)
input terminals
Configuration: DIP switch
Setting:
• Input Type
110.5
(4.35)
• Input Range
mm (inch)
• Burnout
• Others
Refer to the instruction manual for details.
MODEL: B3FT–[1][2]
ORDERING INFORMATION
• Code number: B3FT-[1][2]
Specify a code from below for each of [1] and [2].
(e.g. B3FT-1/UL/Q)
• Temperature range (e.g. J 0 – 400°C)
• If you need the transmitter to be calibrated to a specific
range, please specify when ordering.
Non-specified orders will be shipped at default factory
setting (K 0 – 300°C or E 0 – 250°C).
• Specify the specification for option code /Q
(e.g. /C01)
[1] INPUT THERMOCOUPLE
1: K (CA), J (IC), T (CC)
2: E (CRC), R, N
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: CE marking
/UL: UL approval, CE marking
Other Options
blank: none
B3FT SPECIFICATIONS
ES-7512 Rev.10 Page 1/4
https://www.m-system.co.jp/
MODEL: B3FT
INPUT SPECIFICATIONS
INSTALLATION
Input resistance: 20 kΩ min.
Supply voltage: 12 – 45 V DC
Operating temperature:
-40 to +85°C (-40 to +185°F)
Burnout sensing: 0.1 μA
K, J, T thermocouple, Celsius
UPPER RANGE
Max. 55°C (131°F) for UL approval
Operating humidity: 0 to 95 %RH (non-condensing)
Mounting: DIN rail
T/C
LOWER RANGE MIN. SPAN
(usable range)
-18 to +300°C
-18 to +1370°C
-18 to +300°C
-18 to +1200°C
-18 to +150°C
-18 to +400°C
K(CA)
-18 to +190°C
-18 to +850°C
-18 to +190°C
-18 to +750°C
-18 to +75°C
-18 to +250°C
75°C
300°C
70°C
J (IC)
Weight: 80 g (2.8 oz)
300°C
75°C
T (CC)
150°C
PERFORMANCE in percentage of span
Accuracy
K, J, T thermocouple, Fahrenheit
K, J: ±0.2 % of FS or ±0.3°C (±0.54°F), whichever is
greater.
UPPER RANGE
T/C
LOWER RANGE MIN. SPAN
(usable range)
0 to 572°F
0 to 2498°F
0 to 572°F
0 to 2192°F
0 to 302°F
0 to 752°F
K(CA)
0 to 374°F
0 to 1562°F
0 to 374°F
0 to 1382°F
0 to 167°F
0 to 482°F
135°F
540°F
126°F
540°F
135°F
270°F
T, E, N: ±0.3 % of FS or ±0.4°C (±0.72°F), whichever is
greater.
J (IC)
R: ±0.4 % of FS at ≥ 400°C or 752°F
Cold junction compensation error: ±0.5°C or ±0.9°F
maximum for 0 – 55°C (32 – 131°F);
±2°C or ±3.6°F maximum for -40 – +85°C (-40 – +185°F)
Temp. coefficient: ±0.02 %/°C (±0.01 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Burnout response: ≤ 10 sec.
T (CC)
E, R, N thermocouple, Celsius
UPPER RANGE
T/C
LOWER RANGE MIN. SPAN
(usable range)
-18 to +250°C
-18 to +1000°C
-18 to +700°C
-18 to +1760°C
-18 to +400°C
-18 to +1300°C
E(CRC
)
-18 to +120°C
-18 to +600°C
-18 to +340°C
-18 to +1060°C
-18 to +250°C
-18 to +800°C
60°C
250°C
360°C
700°C
110°C
400°C
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute
(input to output to ground)
R
N
E, R, N thermocouple, Fahrenheit
STANDARDS & APPROVALS
EU conformity:
UPPER RANGE
T/C
LOWER RANGE MIN. SPAN
(usable range)
0 to 482°F
0 to 1832°F
0 to 1292°F
0 to 3200°F
0 to 752°F
0 to 2372°F
E(CRC
)
0 to 248°F
0 to 1112°F
0 to 644°F
0 to 1940°F
0 to 482°F
0 to 1472°F
108°F
450°F
648°F
1260°F
198°F
720°F
EMC Directive
EMI EN 61000-6-4
R
EMS EN 61000-6-2
RoHS Directive
N
Approval:
UL/C-UL general safety requirements
(UL 61010-1, CAN/CSA-C22.2 No.1010-1)
OUTPUT SPECIFICATIONS
Output: 4 – 20 mA DC
Load resistance vs. supply voltage:
Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02
(A) (including leadwire resistance)
1650
1600
1400
1200
1000
800
600
400
200
0
1012
20
30
40 45
SUPPLY VOLTAGE [V ]
(600Ω maximum at 24V DC)
B3FT SPECIFICATIONS
ES-7512 Rev.10 Page 2/4
https://www.m-system.co.jp/
MODEL: B3FT
EXTERNAL VIEW
■ FRONT VIEW
■ SIDE VIEW
10 11 12
Input Configuration
DIP SW
Zero Adj.
Span Adj.
1 2 3 4 5 6 7 8
SW3
SW2
SW1
4
5
6
EXTERNAL DIMENSIONS unit: mm [inch]
10 11 12
DIN RAIL
35mm wide
4
5
6
18 (.71)
110.5 (4.35)
[5 (.20)]
• When mounting, no extra space is needed between units.
TERMINAL ASSIGNMENTS unit: mm [inch]
10 11 12
4
5
6
CJC SENSOR
(model: CJM)
B3FT SPECIFICATIONS
ES-7512 Rev.10 Page 3/4
https://www.m-system.co.jp/
MODEL: B3FT
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Burnout
comp. leadwire
T/C
Z
S
Isolation
MONITOR
+
Low Drift
Amplifier
Output
Driver
+
–
+
–
mA
4
Linearizer
12
10
11
24 V DC
–
INPUT CONFIG.
DIP SW
–
OUTPUT LOAD
4 – 20 mA DC
5
6
CJC
SENSOR
Cold Junction
Compensation
Specifications are subject to change without notice.
B3FT SPECIFICATIONS
ES-7512 Rev.10 Page 4/4
https://www.m-system.co.jp/
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明