B5VS-5W/Q [MSYSTEM]

Super-mini Two-wire Terminal Block Signal Conditioners B5-UNIT;
B5VS-5W/Q
型号: B5VS-5W/Q
厂家: M-SYSTEM    M-SYSTEM
描述:

Super-mini Two-wire Terminal Block Signal Conditioners B5-UNIT

文件: 总3页 (文件大小:110K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MODEL: B5VS  
Super-mini Two-wire Terminal Block  
Signal Conditioners B5-UNIT  
[2] OPTIONS (multiple selections)  
Response Time (0 – 90 %)  
blank: Standard (≤ 0.5 sec.)  
/K: Fast Response (Approx. 25 msec.)  
Other Options  
SIGNAL TRANSMITTER  
Functions & Features  
blank: none  
• Converts a DC input into an isolated 4 – 20 mA DC signal  
• Monitor terminals  
/Q: Option other than the above (specify the specification)  
• High-density mounting  
SPECIFICATIONS OF OPTION: Q  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
• Power LED  
25 (.98)  
/C02: Polyurethane coating  
/C03: Rubber coating  
97  
(3.82)  
GENERAL SPECIFICATIONS  
Construction: Terminal block  
Connection: M3.5 screw terminals (torque 0.8 N·m)  
Screw terminal: Nickel-plated steel  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output  
41 (1.61)  
mm (inch)  
Zero adjustment: -1 to +1 % (front)  
Span adjustment: 95 to 105 % (front)  
Power LED: Orange LED turns on when the power is  
supplied.  
MODEL: B5VS–[1][2]  
ORDERING INFORMATION  
• Code number: B5VS-[1][2]  
Specify a code from below for each of [1] and [2].  
(e.g. B5VS-4W/K/Q)  
INPUT SPECIFICATIONS  
DC Current: Input resistor incorporated  
• Special input range (For codes Z & 0)  
• Specify the specification for option code /Q  
(e.g. /C01)  
Specify input resistance value for code Z.  
(R ≤ 0.125 W ÷ [F.S. Current] )  
2
DC Voltage: -30 – +30 V DC  
Minimum span: 100 mV  
Offset: Max. 1.5 times span  
Input resistance  
[1] INPUT  
Current  
A: 4 – 20 mA DC (Input resistance 249 Ω)  
B: 2 – 10 mA DC (Input resistance 499 Ω)  
C: 1 – 5 mA DC (Input resistance 1000 Ω)  
D: 0 – 20 mA DC (Input resistance 49.9 Ω)  
E: 0 – 16 mA DC (Input resistance 61.9 Ω)  
F: 0 – 10 mA DC (Input resistance 100 Ω)  
G: 0 – 1 mA DC (Input resistance 1000 Ω)  
H: 10 – 50 mA DC (Input resistance 10 Ω)  
Z: Specify current (See INPUT SPECIFICATIONS)  
Voltage  
Span 0.1 – 1 V : ≥ 100 kΩ  
Span ≥ 1 V : ≥ 1 MΩ  
OUTPUT SPECIFICATIONS  
Output: 4 – 20 mA DC  
Load resistance vs. supply voltage:  
Load Resistance (Ω) = (Supply Voltage (V) – 12 (V)) ÷ 0.02  
(A) (including leadwire resistance)  
800  
600  
400  
200  
0
3: 0 – 1 V DC (Input resistance 1 MΩ min.)  
4: 0 – 10 V DC (Input resistance 1 MΩ min.)  
5: 0 – 5 V DC (Input resistance 1 MΩ min.)  
6: 1 – 5 V DC (Input resistance 1 MΩ min.)  
4W: -10 – +10 V DC (Input resistance 1 MΩ min.)  
5W: -5 – +5 V DC (Input resistance 1 MΩ min.)  
0: Specify voltage (See INPUT SPECIFICATIONS)  
10 12 15  
20  
25 28  
SUPPLY VOLTAGE [V ]  
(600Ω maximum at 24V DC)  
B5VS SPECIFICATIONS  
ES-1513 Rev.9 Page 1/3  
https://www.m-system.co.jp/  
MODEL: B5VS  
INSTALLATION  
Supply voltage: 12 – 28 V DC  
Operating temperature: -40 to +80°C (-40 to +176°F)  
Operating humidity: 0 to 90 %RH (non-condensing)  
Mounting: DIN rail  
Weight: 60 g (2.1 oz)  
PERFORMANCE in percentage of span  
Accuracy: ±0.1 %  
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @1 minute  
(input to output to ground)  
STANDARDS & APPROVALS  
EU conformity:  
EMC Directive  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
RoHS Directive  
EXTERNAL VIEW  
1
2
Power LED  
3
4
Span Adj.  
Zero Adj.  
5
6
7
8
B5VS SPECIFICATIONS  
ES-1513 Rev.9 Page 2/3  
https://www.m-system.co.jp/  
MODEL: B5VS  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]  
7.3 (.29)  
8–M3.5 SCREW  
1
2
DIN RAIL  
35mm wide  
3
4
5
6
7
8
25 (.98)  
41 (1.61)  
[3.3 (.13)]  
• When mounting, no extra space is needed between units.  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
POWER LED  
Z
S
Isolation  
Low Drift  
Amplifier  
Output  
Driver  
+
+
+
MONITOR  
+
3
4
1
2
8
7
5
6
*
mA  
INPUT  
24V DC  
**  
OUTPUT LOAD  
4 – 20mA DC  
* Input shunt resistor incorporated for current input.  
**Short across the terminals for current input.  
Specifications are subject to change without notice.  
B5VS SPECIFICATIONS  
ES-1513 Rev.9 Page 3/3  
https://www.m-system.co.jp/  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY