F2FL-B-R [MSYSTEM]
Super-mini Signal Conditioners F2 Series;
| 型号： | F2FL-B-R |
| 厂家： | 
M-SYSTEM |
| 描述： | Super-mini Signal Conditioners F2 Series |
| 文件： | 总2页 (文件大小：96K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: F2FL
Super-mini Signal Conditioners F2 Series
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SQUARE ROOT EXTRACTOR
(non-isolated)
Functions & Features
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Provides a DC output proportional to the root of input
signal
• Low-end cutout
/C02: Polyurethane coating
Typical Applications
GENERAL SPECIFICATIONS
Construction: Stand-alone; terminal access at the front
• Converting differential pressure to flow
Connection: Euro type connector terminal
22.5 (.89)
(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)
2
Housing material: Flame-resistant resin (black)
Isolation: Input or output to power
75
(2.95)
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
Low-end cutout: Approx. 4 – 8 % (output)
107
(4.21)
mm (inch)
8% or less
MODEL: F2FL–[1]6–R[2]
4% or more
0
INPUT
ORDERING INFORMATION
• Code number: F2FL-[1]6-R[2]
Specify a code from below for each of [1] and [2].
(e.g. F2FL-66-R/Q)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
• Specify the specification for option code /Q
(e.g. /C01)
INSTALLATION
Current consumption
[1] INPUT
Current
•DC: Approx. 80 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: DIN rail
A: 4 – 20 mA DC (Input resistance 250 Ω)
B: 2 – 10 mA DC (Input resistance 500 Ω)
C: 1 – 5 mA DC (Input resistance 1000 Ω)
H: 10 – 50 mA DC (Input resistance 100 Ω)
Voltage
Weight: 150 g (0.33 lb)
PERFORMANCE in percentage of span
Accuracy: ±0.2 % (input 1 – 100 %)
6: 1 – 5 V DC (Input resistance 100 kΩ min.)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
OUTPUT
Voltage
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @1 minute (input or output
to power to ground)
6: 1 – 5 V DC (Load resistance 10 kΩ min.)
POWER INPUT
DC Power
R: 24 V DC
STANDARDS & APPROVALS
EU conformity:
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
EMC Directive
F2FL SPECIFICATIONS
ES-5445 Rev.6 Page 1/2
http://www.m-system.co.jp/
MODEL: F2FL
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
Approval:
UL/C-UL general safety requirements
(UL 3111-1, CAN/CSA-C22.2 No.1010-1)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
DIN RAIL
35mm wide
1
2 3 4
5
6 7 8
22.5 (.89)
107 (4.21)
[1.5 (.06)]
• When mounting, no extra space is needed between units.
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
Z
S
Sq. Root
Extractor
Low-end
Cutout
+
–
+
–
+
–
1
2
3
4
5
6
7
8
*
INPUT
OUTPUT
POWER
*Input shunt resistor incorporated for current input.
Specifications are subject to change without notice.
F2FL SPECIFICATIONS
ES-5445 Rev.6 Page 2/2
http://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明