F2PP-22N-R/Q [MSYSTEM]

Super-mini Signal Conditioners F2 Series;


型号：	F2PP-22N-R/Q
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners F2 Series
文件：	总3页 (文件大小：108K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: F2PP

Super-mini Signal Conditioners F2 Series

[3] OUTPUT LOGIC

N: The same as the input

R: Inverted

PULSE ISOLATOR

Functions & Features

• Galvanically isolating pulse rate signals

• Input frequency = output frequency

• Various outputs (open collector and voltage pulses)

• High-density mounting

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Typical Applications

[4] OPTIONS

blank: none

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

/Q: With options (specify the specification)

22.5 (.89)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

(2.95)

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

107

(4.21)

mm (inch)

Connection: Euro type connector terminal

(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

MODEL: F2PP–[1][2][3]–R[4]

Frequency range: Input and output are the same.

Chattering protection: Filter provided for mechanical

contact input

ORDERING INFORMATION

• Code number: F2PP-[1][2][3]-R[4]

Specify a code from below for each of [1] through [4].

(e.g. F2PP-33N-R/Q)

Input pulse sensing: DC coupled

• Frequency range (e.g. 0 – 1000 Hz)

• Specify the specification for option code /Q

(e.g. /C01)

INPUT SPECIFICATIONS

Excitation: 12 V DC @30 mA; shortcircuit protection

■ Open Collector

Sensing: Approx. 12 V DC @ 3 mA

ON/OFF level: ≤ 200 Ω / 0.6V for ON, ≥ 100 kΩ / 6V for OFF

Low frequency open collector output

Maximum frequency: 30 Hz

[1] INPUT

1: Mechanical contact (max. 30 Hz)

2: Open collector (max. 10 kHz)

3: Voltage pulse (max. 10 kHz)

Pulse width time requirement: 10 msec. min. for ON and

OFF

Note: When the output signal is Low frequency open

collector, the max. input frequency is 30 Hz.

High frequency open collector output

Maximum frequency: 10 kHz

Pulse width time requirement: 10 μsec. min. for ON and OFF

■ Mechanical Contact

[2] OUTPUT

1: Low frequency open collector (max. 30 Hz)

2: High frequency open collector (max. 10 kHz)

3: 5 V pulse (max. 10 kHz)

Maximum frequency: 30 Hz

Pulse width time requirement: 10 msec. min. for ON and

OFF

4: 12 V pulse (max. 10 kHz)

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Voltage Pulse: Square or sine waveforms

Low frequency open collector output

Maximum frequency: 30 Hz

5: 24 V pulse (max. 10 kHz)

F2PP SPECIFICATIONS

ES-5438 Rev.6 Page 1/3

http://www.m-system.co.jp/

MODEL: F2PP

Pulse width time requirement: 10 msec. min. for ON and

OFF

EN 50581

Approval:

High frequency open collector output

Maximum frequency: 10 kHz

UL/C-UL general safety requirements

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)

Pulse width time requirement: 10 μsec. min. for ON and OFF

Voltage range: -30 – +30 V DC

Hi/Lo level: 2 – 30 V for high level; ≤ 1 V for low level

Input impedance: 10 kΩ minimum

OUTPUT SPECIFICATIONS

■ Low Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 30 Hz

Timer: Limits within 75 ±25 msec.

for wider than 75 msec. pulses

ON time for output logic non-inverted

OFF time for output logic inverted

Saturation voltage: 0.5 V DC

■ High Frequency Open Collector:

50 V DC @100 mA (resistive load)

Maximum frequency: 10 kHz

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 10 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5V

Load resistance:

≥ 250 Ω for 5 V

≥ 600 Ω for 12 V

≥ 1200 Ω for 24 V

INSTALLATION

Current consumption

•DC: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

F2PP SPECIFICATIONS

ES-5438 Rev.6 Page 2/3

http://www.m-system.co.jp/

MODEL: F2PP

OUTPUT LOGIC

VOLTAGE PULSE

OUTPUT

OPEN COLLECTOR

OUTPUT

INPUT TYPE

PULSE LOGIC

Non Inverted

INPUT

OFF

Voltage Pulse

OFF

Inverted

Non Inverted

Inverted

OFF

Mechanical Contact

Open Collector

OFF

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

DIN RAIL

35mm wide

2 3 4

6 7 8

22.5 (.89)

107 (4.21)

[1.5 (.06)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Output

Driver

–

Timer

INPUT

OUTPUT

POWER

SENSOR EXCITATION

12V Supply

*Low freq. open collector only.

■ Voltage Pulse

Input Connection Examples

Output Connection Examples

■ Mechanical Contact or

Open Collector

■ Open Collector

■ Voltage Pulse

–

+12V

PWR

4kΩ

Specifications are subject to change without notice.

F2PP SPECIFICATIONS

ES-5438 Rev.6 Page 3/3

http://www.m-system.co.jp/

相关型号：