F2RS-4D-R/BL [MSYSTEM]

Super-mini Signal Conditioners F2 Series;


型号：	F2RS-4D-R/BL
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners F2 Series
文件：	总3页 (文件大小：98K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: F2RS

0: Specify

Super-mini Signal Conditioners F2 Series

Note: Consult M-System for 2-wire RTD

RTD TRANSMITTER

Functions & Features

[2] OUTPUT

Current

• Accepting direct input from an RTD and providing

a standard process signals

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

• Linearization

• Burnout protection

• "Active bridge" circuit containing two constant current

sources allows large leadwire resistances up to 200 Ω

• Fast response type available

• High-density mounting

Typical Applications

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

• Long distance transmission between the RTD and the

transmitter

• Combination with intrinsic safety barriers

22.5 (.89)

(2.95)

POWER INPUT

DC Power

R: 24 V DC

107

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

(4.21)

mm (inch)

[3] OPTIONS (multiple selections)

Response Time (0 – 90 %)

blank: Standard (≤ 0.5 sec.)

/K: Fast Response (Approx. 25 msec.)

Burnout

MODEL: F2RS-[1][2]-R[3]

ORDERING INFORMATION

• Code number: F2RS-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. F2RS-4A-R/BL)

blank: Upscale burnout

/BL: Downscale burnout

Other Options

• Temperature range (e.g. 0 – 500°C)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

[1] INPUT RTD (2- or 3-wire)

1: JPt 100 (JIS'89)

/C02: Polyurethane coating

(Usable range: -200 to +500°C, -328 to +932°F; min.span: 50°C, 90°F)

3: Pt 100 (JIS'89)

(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)

4: Pt 100 (JIS'97, IEC)

(Usable range: -200 to +650°C, -328 to +1202°F; min.span: 50°C, 90°F)

5: Pt 50 Ω (JIS'81)

(Usable range: -200 to +500°C, -328 to +932°F; min.span: 100°C, 180°F)

6: Ni 508.4 Ω

(Usable range: -50 to +200°C, -58 to +392°F; min.span: 30°C, 54°F)

F2RS SPECIFICATIONS

ES-5413 Rev.6 Page 1/3

http://www.m-system.co.jp/

MODEL: F2RS

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

Connection: Euro type connector terminal

(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Linearization: Standard

INPUT SPECIFICATIONS

Maximum leadwire resistance: 200 Ω per wire (3-wire)

Sensing current: 2 mA (Pt); 1 mA (Ni 508.4 Ω)

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Current consumption

•DC: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.2 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Burnout response: ≤ 10 sec.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL general safety requirements

F2RS SPECIFICATIONS

ES-5413 Rev.6 Page 2/3

http://www.m-system.co.jp/

MODEL: F2RS

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

DIN RAIL

35mm wide

2 3 4

6 7 8

22.5 (.89)

107 (4.21)

[1.5 (.06)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Burnout

RTD

Isolation

Reference

Resistor

Differential

Amplifier

Output

Driver

–

Constant

Current

OUTPUT

POWER

Linearizer

Specifications are subject to change without notice.

F2RS SPECIFICATIONS

ES-5413 Rev.6 Page 3/3

http://www.m-system.co.jp/

相关型号：