F2SP-E-R [MSYSTEM]

Super-mini Signal Conditioners F2 Series;


型号：	F2SP-E-R
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners F2 Series
文件：	总3页 (文件大小：103K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: F2SP

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

Super-mini Signal Conditioners F2 Series

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

LOW FREQUENCY TRANSMITTER

(50 Hz minimum)

Functions & Features

• Converting the output from a pulse-type transducer into a

standard process signal

POWER INPUT

Typical Applications

DC Power

• Positive displacement flowmeters, turbine flowmeters and

vortex flowmeters

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Proximity switches

[3] OPTIONS

22.5 (.89)

blank: none

/Q: With options (specify the specification)

(2.95)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

107

(4.21)

/C02: Polyurethane coating

mm (inch)

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

MODEL: F2SP–[1][2]–R[3]

Connection: Euro type connector terminal

(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)

ORDERING INFORMATION

• Code number: F2SP-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. F2SP-2A-R/Q)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Input pulse sensing: DC coupled; detecting pulse rise

Input filter: Provided with input range <100 Hz with dry

contact input

• Frequency range (e.g. 0 – 10 kHz)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

(time constant approx. 1 msec.)

Low-end cutout: 2 to 5 %

[1] INPUT

1: Dry contact

2: Voltage pulse

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

F2SP SPECIFICATIONS

ES-5434 Rev.6 Page 1/3

http://www.m-system.co.jp/

MODEL: F2SP

INPUT SPECIFICATIONS

Excitation: 12 V DC @30 mA; shortcircuit protection

Frequency range: 0 – 50 Hz through 10 kHz

• Dry Contact: Mechanical contact or open collector

Pulse width time requirement: 20 μsec. min. for ON and

OFF (2 msec. for ranges <100 Hz)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

Sensing: Approx. 12V DC @3 mA

EN 50581

ON/OFF level: ≤200 Ω/0.6 V for ON, ≥100k Ω/6 V for OFF

• Voltage Pulse: Square or sine waveforms

Pulse width time requirement: 20 μsec. min. for high and

low levels

Approval:

UL/C-UL general safety requirements

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)

Voltage range: -30 – +30 V DC

Hi level: 2 – 30 V p-p

Lo level: ≤1 V

Input impedance: 10k Ω minimum

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: 0 – 12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Current consumption

•DC: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % (output 10 – 100 %)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: (0 – 90%)

Approx. 1.8 sec. with 0 – 50 Hz

Approx. 0.8 sec. with 0 – 100 Hz

Approx. 0.5 sec. with 0 – 500 Hz

Approx. 0.5 sec. with 0 – 10 kHz

Ripple: 0.2 %p-p max. with input ≥ 10 %

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute (input to output

to power to ground)

F2SP SPECIFICATIONS

ES-5434 Rev.6 Page 2/3

http://www.m-system.co.jp/

MODEL: F2SP

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

DIN RAIL

35mm wide

2 3 4

6 7 8

22.5 (.89)

107 (4.21)

[1.5 (.06)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Output

Driver

–

One-Shot

Smoother

INPUT

OUTPUT

POWER

SENSOR EXCITATION

12V Supply

Input Connection Examples

■ Dry Contact

■ Voltage Pulse

–

+12V

PWR

4kΩ

Specifications are subject to change without notice.

F2SP SPECIFICATIONS

ES-5434 Rev.6 Page 3/3

http://www.m-system.co.jp/

相关型号：