F2VF-BF-R/Q [MSYSTEM]

Super-mini Signal Conditioners F2 Series;


型号：	F2VF-BF-R/Q
厂家：	M-SYSTEM
描述：	Super-mini Signal Conditioners F2 Series
文件：	总3页 (文件大小：96K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: F2VF

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

Super-mini Signal Conditioners F2 Series

4W: -10 – +10 V DC (Input resistance 1 MΩ min.)

5W: -5 – +5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

SIGNAL TRANSMITTER

(high speed response)

Functions & Features

[2] OUTPUT

Current

• Converts DC input from a sensor into a standard process

signal

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

• Isolation between input and output

• 180-microsecond response

Typical Applications

• Isolation for a vibration analyzing system

22.5 (.89)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 10 kΩ min.)

5W: -5 – +5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

(2.95)

107

(4.21)

mm (inch)

MODEL: F2VF–[1][2]–R[3]

ORDERING INFORMATION

• Code number: F2VF-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. F2VF-6A-R/Q)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Special input and output ranges (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

[1] INPUT

Current

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

A: 4 – 20 mA DC (Input resistance 250 Ω)

B: 2 – 10 mA DC (Input resistance 500 Ω)

C: 1 – 5 mA DC (Input resistance 1000 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

E: 0 – 16 mA DC (Input resistance 62.5 Ω)

F: 0 – 10 mA DC (Input resistance 100 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

GW: -1 – +1 mA DC (Input resistance 1000 Ω)

FW: -10 – +10 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

Voltage

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Construction: Stand-alone; terminal access at the front

Connection: Euro type connector terminal

(applicable wire size: 0.2 to 2.5 mm , stripped length 7 mm)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

F2VF SPECIFICATIONS

ES-5414 Rev.6 Page 1/3

http://www.m-system.co.jp/

MODEL: F2VF

INPUT SPECIFICATIONS

■ DC Current: Input resistor incorporated

Specify input resistance value for code Z.

(R ≤ 0.5 W ÷ [F.S. Current] )

■ DC Voltage: -30 – +30 V DC

Span: min. 1 V, max. 30 V

Offset: Max. 1.5 times span

Input resistance: 1 MΩ min.

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Current consumption

•DC: Approx. 80 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: DIN rail

Weight: 150 g (0.33 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 180 μsec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

1000 V AC @1 minute (input to output)

2000 V AC @1 minute (input or output to power to ground)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

Approval:

UL/C-UL general safety requirements

(UL 3111-1, CAN/CSA-C22.2 No.1010-1)

F2VF SPECIFICATIONS

ES-5414 Rev.6 Page 2/3

http://www.m-system.co.jp/

MODEL: F2VF

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

DIN RAIL

35mm wide

2 3 4

6 7 8

22.5 (.89)

107 (4.21)

[1.5 (.06)]

• When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Output

Driver

–

SIGNAL SOURCE

OUTPUT

POWER

*Input shunt resistor incorporated for current input.

The F2VF, by its fast-response feature, is not designed to eliminate noise present in the input signal.

Use a shielded twisted-pair cable for preventing noise entering through the input wiring.

Specifications are subject to change without notice.

F2VF SPECIFICATIONS

ES-5414 Rev.6 Page 3/3

http://www.m-system.co.jp/

相关型号：