FAP-G2-L/Q [MSYSTEM]

Space-saving Plug-in Signal Conditioners F-UNIT;


型号：	FAP-G2-L/Q
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners F-UNIT
文件：	总4页 (文件大小：128K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: FAP

Space-saving Plug-in Signal Conditioners F-UNIT

[2] OUTPUT

1: Open collector (max. 1 kHz)

2: 5 V pulse (max. 1 kHz)

DC/FREQUENCY CONVERTER

Functions & Features

5: Photo MOSFET relay pulse (max. 30 Hz)

• Providing a pulse rate output in proportion to DC input

signal

[3] POWER INPUT

• High-density mounting

AC Power

K: 85 – 132 V AC

Typical Applications

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

L: 170 – 264 V AC

• Totalizing applications in combination with a counter

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

DC Power

R: 24 V DC

26 (1.02)

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

100

(3.94)

[4] OPTIONS

blank: none

137

(5.39)

/Q: With options (specify the specification)

mm (inch)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

MODEL: FAP–[1][2]–[3][4]

/C02: Polyurethane coating

ORDERING INFORMATION

• Code number: FAP-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. FAP-61-K/Q)

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

• Special input range (For codes Z & 0)

• Output frequency range (e.g. 0 – 500 Hz)

• Specify the specification for option code /Q

(e.g. /C01/S01)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

[1] INPUT

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: 0 – 5 % (front)

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Z: Specify current (See INPUT SPECIFICATIONS)

( 0 % input must be 0 mA.)

Span adjustment: 95 to 105 % (front)

INPUT SPECIFICATIONS

■ DC Current:

Voltage

Shunt resistor attached to the input terminals (0.5 W)

Specify input resistance value for code Z.

■ DC Voltage: 0 – 300V DC

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

( 0 % input must be 0 V.)

Minimum span: 1V

Input resistance: 1 MΩ min.

FAP SPECIFICATIONS

ES-1451 Rev.11 Page 1/4

http://www.m-system.co.jp/

MODEL: FAP

Operating humidity: 30 to 90 %RH (non-condensing)

OUTPUT SPECIFICATIONS

■ Open Collector: 30 V DC @100 mA (resistive load)

Frequency range: 0 – 10 pulses/hour through 1 kHz

Saturation voltage: 0.6 V DC

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 190 g (0.42 lb)

■ 5 V Pulse

Frequency range: 0 – 10 pulses/hour through 1 kHz

Hi level: 3.0 – 5.5 V

PERFORMANCE in percentage of span

Accuracy: ±0.1 %

Lo level: ≤ 0.5 V

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Approx. 3 sec. (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Load resistance: 250 Ω min.

■ Photo MOSFET Relay Pulse

Frequency range: 0 – 10 pulses/hour through 30 Hz

Timer: Limits ON time within 75 ±25 msec.

Rating: 132 V AC @ 200 mA (cos ø = 1)

30 V DC @ 200 mA (resistive load)

ON resistance: ≤ 2 Ω

Power input code R:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

OUTPUT PULSE WIDTH

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)

■ Frequency less than 500 Hz at 100% input

➞ Duty ratio 20% (See the figure below)

• Open Collector

• Voltage Pulse

OFF

H Level

L Level

20%

80%

1 / f

■ Frequency greater than 500 Hz at 100% input

➞ See the figure and equation below.

• Open Collector

• Voltage Pulse

OFF

H Level

L Level

Pulse Width

Pulse Width [millisec.] =

2.09 × 100% Frequency [kHz]

■ Photo MOSFET Relay Pulse

➞ See the figure below. ON pulse width is limited

within 75 25 msec. when the output frequency

gets low (below 2 to 4 Hz).

• Photo MOSFET Relay Pulse

OFF

1 / f

INSTALLATION

Power consumption

•AC: Approx. 4.5 VA

•DC: 24 V approx. 70 mA

110 V approx. 20 mA

Operating temperature: -5 to +55°C (23 to 131°F)

FAP SPECIFICATIONS

ES-1451 Rev.11 Page 2/4

http://www.m-system.co.jp/

MODEL: FAP

EXTERNAL DIMENSIONS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

26 (1.02)

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM)

Input shunt resistor attached

for current input.

FAP SPECIFICATIONS

ES-1451 Rev.11 Page 3/4

http://www.m-system.co.jp/

MODEL: FAP

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Low Drift

Amplifier

Volt. / Freq.

Converter

Output

Driver

–

Divider

INPUT

OUTPUT

–

U(+)

V(–)

POWER

Base Socket

*Input shunt resistor attached for current input.

Output Connection Examples

■ Open Collector

■ Photo MOSFET Relay Pulse

• AC Powered

Relay or

Counter Coil

–

Varistor or Spark

Quenching Circuit

LOAD

■ Voltage Pulse

• DC Powered

Relay or

Counter Coil

–

Spark Quenching

Diode

LOAD

Specifications are subject to change without notice.

FAP SPECIFICATIONS

ES-1451 Rev.11 Page 4/4

http://www.m-system.co.jp/

相关型号：