FJPA-16-L/Q [MSYSTEM]

Space-saving Plug-in Signal Conditioners F-UNIT;


型号：	FJPA-16-L/Q
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners F-UNIT
文件：	总3页 (文件大小：105K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: FJPA

3: Mechanical contact (Excitation: 12 V @ 30 mA)

Space-saving Plug-in Signal Conditioners F-UNIT

[2] OUTPUT

Current

FREQUENCY TRANSMITTER

(field-programmable)

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Voltage

Functions & Features

• Converting the output from a pulse-type transducer into a

standard process signal

6: 1 – 5 V DC (Load resistance 500 Ω min.)

• Micro-processor based

• Field-programmable frequency range

• Linearization available for flow compensation

• Averaging non-uniform pulses

• Excitation

[3] POWER INPUT

AC Power

K: 85 – 132 V AC

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

L: 170 – 264 V AC

• Loop testing via hand-held programmer PU-2x

• Highdensity mounting

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

DC Power

Typical Applications

R: 24 V DC

• Positive displacement flowmeters, turbine flowmeters and

vortex flowmeters

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

• Proximity switches

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

• Oval flowmeters

[4] OPTIONS

blank: none

26 (1.02)

/Q: With options (specify the specification)

100

(3.94)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

137

(5.39)

/C02: Polyurethane coating

mm (inch)

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

MODEL: FJPA–[1][2]–[3][4]

RELATED PRODUCTS

• Programming Unit (model: PU-2x)

ORDERING INFORMATION

• Code number: FJPA-[1][2]-[3][4]

• PC configurator software (model: JXCON)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

Specify a code from below for each of [1] through [4].

(e.g. FJPA-3A-L/Q)

• Frequency range (e.g. 0 – 152.3 Hz)

• Linearization data (max. 16 points)

Use Ordering Information Sheet (No. ESU-1673) to specify

linearization data when the I/O signals are non-linear.

• Specify the specification for option code /Q

(e.g. /C01/S01)

GENERAL SPECIFICATIONS

Construction: Plug-in

Note: Consult factory on applications with a sensor handling

periodically (& quickly) changing frequency (e.g. oval

flowmeter).

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

[1] INPUT

1: Open collector (Excitation: 12 V @ 30 mA)

Overrange output: -10 – +120 % at 1 – 5 V

(0 – 120 % when 0 % input equals to 0 Hz.)

2: Voltage pulse (Excitation: 12 V @ 30 mA)

FJPA SPECIFICATIONS

ES-1473 Rev.13 Page 1/3

http://www.m-system.co.jp/

MODEL: FJPA

Linearization: 16 points max. represented as percentage of

full-scale

Dielectric strength

Power input code R:

Adjustments: Programming Unit (model: PU-2x); input

range, low-end cutout, zero and span, simulating output,

averaging nonuniform pulses, linearization data, etc.

(Refer to the users manual of JXCON for the adjustments

configurable with JXCON.)

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)

Low-end cutout: 0 – 100 % adjustable (factory set to 0 %);

hysteresis fixed to 1 %

INPUT SPECIFICATIONS

Excitation: 12 V DC @30 mA; shortcircuit protection

Pulse width (time) requirement: 10 msec. min. at

< 20 Hz; duty ratio 20 – 80 % at ≥ 20 Hz

Offset: Max. 3 times span

■ Open Collector

Frequency range: 0 – 0.01 Hz through 25 kHz

(0 – 1 kHz will be used if not otherwise specified)

Sensing: Approx. 12 V DC @ 3 mA

ON/OFF level: ≤ 800 Ω / 2 V for ON,

≥ 1.2 kΩ / 3.6 V for OFF

■ Mechanical Contact

Frequency range: 0 – 0.01 Hz through 5 Hz

(0 – 5 Hz will be used if not otherwise specified)

Sensing: Approx. 12 V DC @ 3 mA

ON/OFF level: ≤ 800 Ω / 2 V for ON,

≥ 1.2 kΩ / 3.6 V for OFF

■ Voltage Pulse: Square or sine waveforms

Frequency range: 0 – 0.01 Hz through 25 kHz

(0 - 1 kHz will be used if not otherwise specified.)

Input amplitude: 2 – 50 Vp-p

Input impedance: 10 kΩ min.

INSTALLATION

Power input

•AC: Approx. 4.5 VA

•DC: 24 V approx. 70 mA

110 V approx. 20 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % with segment gain ≤ 1 [±0.1 % × gain]

with segment gain > 1

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: 0.5 sec. + 1 pulse cycle (0 – 90 %)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

FJPA SPECIFICATIONS

ES-1473 Rev.13 Page 2/3

http://www.m-system.co.jp/

MODEL: FJPA

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

26 (1.02)

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Digital

Computation

Output

Driver

–

INPUT

OUTPUT

POWER

–

SENSOR EXCITATION

12V Supply

U(+)

V(–)

MODULAR JACK

PU-2x

SERIAL TRANSMISSION LINE

Base Socket

Input Connection Examples

■ Open Collector or Mechanical Contact ■ Voltage Pulse

–

+12V

PWR

4kΩ

Specifications are subject to change without notice.

FJPA SPECIFICATIONS

ES-1473 Rev.13 Page 3/3

http://www.m-system.co.jp/

相关型号：