FPP-34-K [MSYSTEM]

Space-saving Plug-in Signal Conditioners F-UNIT;


型号：	FPP-34-K
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners F-UNIT
文件：	总4页 (文件大小：115K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: FPP

Space-saving Plug-in Signal Conditioners F-UNIT

[3] POWER INPUT

AC Power

K: 85 – 132 V AC

PULSE ISOLATOR

Functions & Features

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

L: 170 – 264 V AC

• Galvanically isolating pulse rate signals

• Input frequency = output frequency

• Various outputs (open collector, voltage pulses and photo

MOSFET relay pulse)

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

• High-density mounting

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

Typical Applications

• Isolating field pulse signals in order to reduce noises

• Changing e.g. dry contact signal to e.g. 5 V signals

[4] OPTIONS

blank: none

/Q: With options (specify the specification)

26 (1.02)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

100

(3.94)

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

137

(5.39)

mm (inch)

GENERAL SPECIFICATIONS

Construction: Plug-in

MODEL: FPP–[1][2]–[3][4]

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

ORDERING INFORMATION

• Code number: FPP-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. FPP-33-K/Q)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Frequency range: Input and output are the same.

Chattering protection: Filter provided for mechanical

contact input

• Frequency range (e.g. 0 – 1000 Hz)

• Specify the specification for option code /Q

(e.g. /C01/S01)

INPUT SPECIFICATIONS

Excitation: 12V DC ±2 V @ 30 mA; shortcircuit protection

■ Open Collector

[1] INPUT

1: Mechanical contact (max. 30 Hz)

2: Open collector (max. 10 kHz)

3: Voltage pulse (max. 10 kHz)

Maximum frequency: 10 kHz

Pulse width time requirement: 10 μsec. min. for ON and OFF

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Mechanical Contact

[2] OUTPUT

1: Low frequency open collector (max. 30 Hz)

2: High frequency open collector (max. 10 kHz)

3: 5 V pulse (max. 10 kHz)

Maximum frequency: 30 Hz

Pulse width time requirement: 10 msec. min. for ON and

OFF

4: 12 V pulse (max. 10 kHz)

5: 24 V pulse (max. 10 kHz)

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Voltage Pulse

8: Photo MOSFET relay pulse (max. 30 Hz)

Maximum frequency: 10 kHz

FPP SPECIFICATIONS

ES-1461 Rev.10 Page 1/4

http://www.m-system.co.jp/

MODEL: FPP

Pulse width time requirement: 10 μsec. min. for high and

low levels

Power input code K, L, P:

1000 V AC @ 1 minute (input to output)

Waveforms: Square or sine

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)

Hi/Lo level: 2 – 50 V for high level; ≤1 V for low level

Input impedance: 10 kΩ min.

OUTPUT SPECIFICATIONS

■ Low Frequency Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 30 Hz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Saturation voltage: 0.5 V DC

■ High Frequency Open Collector

50 V DC @ 100 mA (resistive load)

Maximum frequency: 10 kHz

Saturation voltage: 0.5 V DC

■ Voltage Pulse

Maximum frequency: 10 kHz

High level: Rating (5, 12 or 24 V) ±10 %

Low level: ≤ 0.5V

Load resistance:

≥ 250 Ω for 5 V

≥ 600 Ω for 12 V

≥ 1200 Ω for 24 V

■ Photo MOSFET Relay Pulse

Maximum frequency: 30 Hz

Timer: Limits ON time within 75 ±25 msec. for wider than

75 msec. pulses

Rating: 132 V AC @ 200 mA (cos ø = 1)

30 V DC @ 200 mA (resistive load)

ON resistance: ≤ 2 Ω

INSTALLATION

Power input

•AC: Approx. 4.5 VA

•DC: 24 V approx. 70 mA

110 V approx. 20 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 180 g (0.40 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Power input code R:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

FPP SPECIFICATIONS

ES-1461 Rev.10 Page 2/4

http://www.m-system.co.jp/

MODEL: FPP

OUTPUT LOGIC

VOLTAGE PULSE

OUTPUT

OPEN COLLECTOR or

PHOTO MOSFET RELAY PULSE OUTPUT

INPUT TYPE

INPUT

OFF

Voltage Pulse

OFF

Mechanical Contact

Open Collector

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

26 (1.02)

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Output

Driver

–

Timer

INPUT

OUTPUT

POWER

–

SENSOR EXCITATION

12V Supply

U(+)

V(–)

Base Socket

* Timer is provided for low frequency open collector or photo MOSFET relay pulse output.

Input Connection Examples

Output Connection Examples

■ Mechanical Contact or Open Collector ■ Open Collector

■ Photo MOSFET Relay Pulse

• AC Powered

Relay or

Counter Coil

–

Varistor or Spark

Quenching Circuit

LOAD

+12V

PWR

4kΩ

■ Voltage Pulse

• DC Powered

Relay or

Counter Coil

■ Voltage Pulse

–

Spark Quenching

Diode

–

LOAD

+12V

PWR

FPP SPECIFICATIONS

ES-1461 Rev.10 Page 3/4

http://www.m-system.co.jp/

MODEL: FPP

Specifications are subject to change without notice.

FPP SPECIFICATIONS

ES-1461 Rev.10 Page 4/4

http://www.m-system.co.jp/

相关型号：