FSP-21-P/Q [MSYSTEM]

Space-saving Plug-in Signal Conditioners F-UNIT;


型号：	FSP-21-P/Q
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners F-UNIT
文件：	总3页 (文件大小：104K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: FSP

Voltage

Space-saving Plug-in Signal Conditioners F-UNIT

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

LOW FREQUENCY TRANSMITTER

(50 Hz minimum)

Functions & Features

• Converting the output from a pulse-type transducer into a

standard process signal

• Excitation

• High-density mounting

[3] POWER INPUT

AC Power

Typical Applications

K: 85 – 132 V AC

• Positive displacement flowmeters, turbine flowmeters and

vortex flowmeters

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

L: 170 – 264 V AC

• Proximity switches

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

DC Power

26 (1.02)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

100

(3.94)

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

[4] OPTIONS

blank: none

137

(5.39)

mm (inch)

/Q: With options (specify the specification)

MODEL: FSP–[1][2]–[3][4]

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

ORDERING INFORMATION

• Code number: FSP-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. FSP-2A-L/Q)

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

• Frequency range (e.g. 0 – 10 kHz)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

[1] INPUT

1: Dry contact

2: Voltage pulse

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: 0 to 120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Input pulse sensing: DC coupled; detecting pulse rise

Low-end cutout: 2 to 5 %

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

INPUT SPECIFICATIONS

Excitation: 12 V DC @30 mA; shortcircuit protection

Frequency range: 0 – 50 Hz through 10 kHz

■ Dry Contact: Mechanical contact or open collector

FSP SPECIFICATIONS

ES-1456 Rev.11 Page 1/3

http://www.m-system.co.jp/

MODEL: FSP

Pulse width time requirement: 20 μsec. min. for ON and OFF

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Voltage Pulse: Square or sine waveforms

Pulse width time requirement: 20 μsec. min. for high and

low levels

Hi level: 2 – 50 V

Lo level: ≤ 1 V

Input impedance: 10 kΩ min.

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: 0 – 12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Power input

•AC: Approx. 5.5 VA

•DC: 24 V approx. 85 mA

110 V approx. 25 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % (output 10 – 100 %)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: (0 – 90%)

Approx. 1.8 sec. with 0 – 50 Hz

Approx. 0.7 sec. with 0 – 100 Hz

Approx. 0.5 sec. with 0 – 500 Hz

Approx. 0.5 sec. with 0 – 10 kHz

Ripple: 0.2 %p-p max. with input ≥ 10 %

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength

Power input code R:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

500 V AC @ 1 minute (I/O to power)

Power input code K, L, P:

1000 V AC @ 1 minute (input to output)

2000 V AC @ 1 minute (input or output or power to ground)

1500 V AC @ 1 minute (I/O to power)

FSP SPECIFICATIONS

ES-1456 Rev.11 Page 2/3

http://www.m-system.co.jp/

MODEL: FSP

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

26 (1.02)

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Output

Driver

–

One-Shot

Smoother

INPUT

OUTPUT

SENSOR EXCITATION

12V Supply

U(+)

V(–)

POWER

Base Socket

Input Connection Examples

■ Dry Contact

■Voltage Pulse

–

+12V

PWR

4kΩ

Specifications are subject to change without notice.

FSP SPECIFICATIONS

ES-1456 Rev.11 Page 3/3

http://www.m-system.co.jp/

相关型号：