HAS-06-R [MSYSTEM]

Space-saving Plug-in Signal Conditioners H-UNIT;


型号：	HAS-06-R
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners H-UNIT
文件：	总4页 (文件大小：137K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: HAS

Space-saving Plug-in Signal Conditioners H-UNIT

[2] OUTPUT

1: Single (SPDT); Hi in power failure

2: Single (SPDT); Lo in power failure

5: Hi/Lo (N.O.); OFF in power failure

6: Hi/Lo (N.C.); OFF in power failure

0: Specify

DC ALARM

Functions & Features

• Providing relay contact closures at preset DC input levels

• Single or dual (Hi/Lo) trip

• Multi-turn screwdriver setpoint adjustments

• Enclosed relays

POWER INPUT

• Relays can be powered 110 V DC

• High-density mounting

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Typical Applications

• Annunciator

[3] OPTIONS

blank: none

• Various alarm applications

/Q: With options (specify the specification)

26 (1.02)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

(3.66)

/C02: Polyurethane coating

/C03: Rubber coating

137

(5.39)

TERMINAL SCREW MATERIAL

/S01: Stainless steel

mm (inch)

MODEL: HAS–[1][2]–R[3]

GENERAL SPECIFICATIONS

Construction: Plug-in

ORDERING INFORMATION

• Code number: HAS-[1][2]-R[3]

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

Specify a code from below for each of [1] through [3].

(e.g. HAS-62-R/Q)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

• Special input range (For code 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Setpoint adjustments: Multi-turn screwdriver adjustments

(front); -5 – +105 % independently

Use Ordering Information Sheet (No. ESU-1033) to specify

output code 0 specifications.

Hysteresis (deadband): Approx. 1 %

Front LEDs: Red LED turns on when the coil is energized.

Power ON timer: Relays de-energized for approx. 2 seconds

after power is turned on.

[1] INPUT

Current

A: 4 – 20 mA DC (Input resistance 250 Ω)

D: 0 – 20 mA DC (Input resistance 50 Ω)

G: 0 – 1 mA DC (Input resistance 1000 Ω)

H: 10 – 50 mA DC (Input resistance 100 Ω)

Voltage

INPUT SPECIFICATIONS

■ DC Current:

Shunt resistor attached to the input terminals (0.5 W)

■ DC Voltage: 0 – 300 V DC

Minimum span: 1 V

3: 0 – 1 V DC (Input resistance 1 MΩ min.)

4: 0 – 10 V DC (Input resistance 1 MΩ min.)

5: 0 – 5 V DC (Input resistance 1 MΩ min.)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

0: Specify voltage (See INPUT SPECIFICATIONS)

Offset: Max. 1.5 times span

Input resistance: ≥ 1 MΩ

HAS SPECIFICATIONS

ES-3481 Rev.11 Page 1/4

http://www.m-system.co.jp/

MODEL: HAS

Insulation resistance: ≥ 100 MΩ with 500 V DC

OUTPUT SPECIFICATIONS

■ Relay Contact: 100 V AC @ 1 A (cos ø = 1)

120 V AC @ 1 A (cos ø = 1)

Dielectric strength: 500 V AC @ 1 minute

(input to output to power)

1500 V AC @ 1 minute (input or output or power to ground)

240 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 1 A (resistive load)

Maximum switching voltage: 380 V AC or 125 V DC

Maximum switching power: 120 VA or 30 W

Minimum load: 5 V DC @ 10 mA

Mechanical life: 5 x 10 cycles

For maximum relay life with inductive loads, external

protection is recommended.

Alarm Trip Operation Terminal No. in parentheses

•Output Code : 1, 2

(3–5)ON

Output

(3–6)ON

Input

(%)

▲

100

Setpoint

•Output Code : 5

(3–5)ON

Hi Output

(3–6)ON

Lo Output

Input

(%)

▲

Lo Setpoint

Hi Setpoint

•Output Code : 6

(3–5)ON

Hi Output

(3–6)ON

Lo Output

Input

(%)

▲

Lo Setpoint

Hi Setpoint

Trip Operation in Power Failure

• Output Code 1: Terminals 3 – 5 turn ON

• Output Code 2: Terminals 3 – 6 turn ON

• Output Code 5, 6: both relays turn OFF

INSTALLATION

Current consumption: Approx. 40 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 180 g (0.40 lb)

PERFORMANCE in percentage of span

Trip point repeatability: ±0.1 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: Approx. 0.5 sec. (0 – 100 % at 90 %

setpoint)

Line voltage effect: ±0.1 % over voltage range

HAS SPECIFICATIONS

ES-3481 Rev.11 Page 2/4

http://www.m-system.co.jp/

MODEL: HAS

EXTERNAL VIEW

Single or Dual High LED

Single Alarm or

Dual High Setpoint Adj.

Dual Low Setpoint Adj.*

Dual Low LED*

*Not provided for Single Alarm.

EXTERNAL DIMENSIONS unit: mm (inch)

7.8 (.31)

CLAMP

(top & bottom)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM)

Input shunt resistor attached

for current input.

HAS SPECIFICATIONS

ES-3481 Rev.11 Page 3/4

http://www.m-system.co.jp/

MODEL: HAS

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

■ SINGLE ALARM

■ Relay Protection

•AC Powered

ADJ.

Inductive

Load (Coil)

Varistor or Spark

Quenching Circuit

Low Drift

Amplifier

LOAD

–

Comparator

OUTPUT

POWER

INPUT

•DC Powered

Inductive

Load (Coil)

–

Diode, Varistor or

CR Circuit

LOAD

Base Socket

* Input shunt resistor attached for current input.

**Relay status is determined by output codes.

■ DUAL ALARM

HI ADJ. LO ADJ.

Low Drift

Amplifier

–

Comparator

OUTPUT

POWER

INPUT

–

Base Socket

* Input shunt resistor attached for current input.

**Relay status is determined by output codes.

Specifications are subject to change without notice.

HAS SPECIFICATIONS

ES-3481 Rev.11 Page 4/4

http://www.m-system.co.jp/

相关型号：