HCE-55-R/Q [MSYSTEM]

Space-saving Plug-in Signal Conditioners H-UNIT;


型号：	HCE-55-R/Q
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners H-UNIT
文件：	总3页 (文件大小：108K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: HCE

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

Space-saving Plug-in Signal Conditioners H-UNIT

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

CT TRANSMITTER

(RMS sensing)

Functions & Features

• Converting an alternating current from a current

transformer into a standard process signal

• Minimum ripple

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

• RMS sensing

• CT Protector provided for open-circuit protection

• Highdensity mounting

Typical Applications

• Centralized monitoring and control of motors, pumps or

heaters by DCS

POWER INPUT

DC Power

• Monitoring power line and power supply current

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

26 (1.02)

[3] OPTIONS

blank: none

/Q: With options (specify the specification)

93 (3.66)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

137 (5.39)

(mm)

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

MODEL: HCE–[1][2]–R[3]

GENERAL SPECIFICATIONS

Construction: Plug-in

ORDERING INFORMATION

• Code number: HCE-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. HCE-1A-R/Q)

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Input waveform: Up to 15 % of 3rd harmonic content

Overrange output: 0 to 120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

[1] INPUT

Current

1: 0 – 1 A AC

5: 0 – 5 A AC

INPUT SPECIFICATIONS

Frequency: 50 or 60 Hz

[2] OUTPUT

Input burden: 0.5 VA max.

Current

Overload capacity: 500 % of rating for 5 sec., 120 %

continuous

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

Operational range: 0 – 120 % of rating

HCE SPECIFICATIONS

ES-3444 Rev.2 Page 1/3

http://www.m-system.co.jp/

MODEL: HCE

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: 0 – 12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Current consumption: Approx. 55 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.3 %

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Ripple: 0.5 %p-p max. (100/120 Hz)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(input to output or power)

500 V AC @ 1 minute (output to power)

1500 V AC @ 1 minute

(input or output or power to ground)

EXTERNAL DIMENSIONS unit: mm (inch)

7.8 (.31)

CLAMP

(top & bottom)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

HCE SPECIFICATIONS

ES-3444 Rev.2 Page 2/3

http://www.m-system.co.jp/

MODEL: HCE

TERMINAL ASSIGNMENTS unit: mm (inch)

CT PROTECTOR

(model: CTM)

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SOURCE

INPUT

TRANSFORMER

RMS

Operation

Output

Driver

–

OUTPUT

LOAD

POWER

CT PROTECTOR

model: CTM

Base Socket

Specifications are subject to change without notice.

HCE SPECIFICATIONS

ES-3444 Rev.2 Page 3/3

http://www.m-system.co.jp/

相关型号：