HPV-E-R/A1S [MSYSTEM]

Space-saving Plug-in Signal Conditioners H-UNIT;


型号：	HPV-E-R/A1S
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners H-UNIT
文件：	总3页 (文件大小：100K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: HPV

Space-saving Plug-in Signal Conditioners H-UNIT

POWER INPUT

DC Power

R: 24 V DC

P/I TRANSDUCER

Functions & Features

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Converting a standard pneumatic signal into a

proportional DC output

[2] OPTIONS (multiple selections)

• High-density mounting

Input

blank: 0.2 – 1.0 kgf/cm

/A1S: 19.6 – 98.1 kPa

/A2S: 20 – 100 kPa

/A3S: 20.7 – 103.4 kPa

/A2: 0.2 – 1.0 bar

Typical Applications

• Converting a pneumatic system into a 4 – 20 mA for

indicating and controlling in DCS system

25 (.98)

/A3: 3 – 15 psig

H•UNIT

HPV

Pneumatic Connection

blank: Rc 1/4"

123

(4.84)

/P7: 1/4" NPT fitting

GENERAL SPECIFICATIONS

Construction: Plug-in

120

(4.72)

Connection

mm (inch)

Output & power input: M3.5 screw terminals;

torque 0.8 N·m

MODEL: HPV–[1]–R[2]

Pneumatic: Rc 1/4" or 1/4" NPT female; torque ≤ 12 N·m

Material

Housing: Flame-resistant resin (black)

Base socket: Die cast aluminium

Screw terminals: Nickel-plated steel

Isolation: Output to power

ORDERING INFORMATION

• Code number: HPV–[1]–R[2]

Specify a code from below for each of [1] and [2].

(e.g. HPV-A-R/A2S/P7)

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

• Special output range (For codes Z & 0)

[1] OUTPUT

Current

INPUT SPECIFICATIONS

■ Input

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm

20 – 100 kPa, 0.2 – 1.0 bar

20.7 – 103.4 kPa, 3 – 15 psig

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

Load resistance: Output drive 15 V max.

■ DC Voltage: 0 – 12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 1 V

INSTALLATION

Current consumption: Approx. 60 mA

Operating temperature: -5 to +55°C (23 to 131°F)

HPV SPECIFICATIONS

ES-3420 Rev.9 Page 1/3

http://www.m-system.co.jp/

MODEL: HPV

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface; Standard Rack Mounting Frame (BX-

16H) available

Weight: 400 g (0.88 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.2 %

Temp. coefficient: ±0.03 %/°C (±0.02 %/°F)

Response time: ≤ 0.5 sec. (0 – 90 %)

Permissible overrange: 196 kPa (2.0 kgf/cm2, 1.96 bar, 28

psig)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500V AC @ 1 minute

(output to power to housing)

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

8.3

(.32)

4–M3.5

SCREW

15 (.59)

PNEUMATIC

CONNECTION

Rc 1/4” or 1/4” NPT

2–4.3 (.17) dia.

MTG HOLE

NPT FITTING

25 (.98)

103 (4.06)

123 (4.84)

25 (.98)

•When mounting, no extra space is needed between units.

*Fitting provided for 1/4” NPT connection.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Semiconductor

Pressure Sensor

Low Drift

Amplifier

Output

Driver

–

INPUT

OUTPUT

POWER

CONSTANT

CURRENT

Base Socket

HPV SPECIFICATIONS

ES-3420 Rev.9 Page 2/3

http://www.m-system.co.jp/

MODEL: HPV

Specifications are subject to change without notice.

HPV SPECIFICATIONS

ES-3420 Rev.9 Page 3/3

http://www.m-system.co.jp/

相关型号：