HSP-10-R/Q [MSYSTEM]

Space-saving Plug-in Signal Conditioners H-UNIT;


型号：	HSP-10-R/Q
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners H-UNIT
文件：	总3页 (文件大小：108K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: HSP

Voltage

Space-saving Plug-in Signal Conditioners H-UNIT

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 1000 Ω min.)

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

LOW FREQUENCY TRANSMITTER

(50 Hz minimum)

Functions & Features

• Converting the output from a pulse-type transducer into a

standard process signal

• Excitation

• High-density mounting

POWER INPUT

DC Power

Typical Applications

R: 24 V DC

• Positive displacement flowmeters, turbine flowmeters and

vortex flowmeters

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Proximity switches

[3] OPTIONS

26 (1.02)

blank: none

/Q: With options (specify the specification)

(3.66)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

137

(5.39)

/C02: Polyurethane coating

mm (inch)

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

MODEL: HSP–[1][2]–R[3]

GENERAL SPECIFICATIONS

Construction: Plug-in

ORDERING INFORMATION

• Code number: HSP-[1][2]-R[3]

Specify a code from below for each of [1] through [3].

(e.g. HSP-2A-R/Q)

Connection: M3.5 screw terminals (torque 0.8 N·m)

Screw terminal: Nickel-plated steel (standard) or stainless

steel

• Frequency range (e.g. 0 – 10 kHz)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Overrange output: 0 to 120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

Input pulse sensing: DC coupled; detecting pulse rise

Low-end cutout: 2 to 5 %

[1] INPUT

1: Dry contact

2: Voltage pulse

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 750 Ω max.)

B: 2 – 10 mA DC (Load resistance 1500 Ω max.)

C: 1 – 5 mA DC (Load resistance 3000 Ω max.)

D: 0 – 20 mA DC (Load resistance 750 Ω max.)

E: 0 – 16 mA DC (Load resistance 900 Ω max.)

F: 0 – 10 mA DC (Load resistance 1500 Ω max.)

G: 0 – 1 mA DC (Load resistance 15 kΩ max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

HSP SPECIFICATIONS

ES-3456 Rev.9 Page 1/3

http://www.m-system.co.jp/

MODEL: HSP

INPUT SPECIFICATIONS

Excitation: 12 V DC @30 mA; shortcircuit protection

Frequency range: 0 – 50 Hz through 10 kHz

■ Dry Contact: Mechanical contact or open collector

Pulse width time requirement: 20 μsec. min. for ON and OFF

Sensing: Approx. 12 V DC @3 mA

ON/OFF level: ≤ 200 Ω / 0.6 V for ON, ≥ 100 kΩ / 6 V for OFF

■ Voltage Pulse: Square or sine waveforms

Pulse width time requirement: 20 μsec. min. for high and

low levels

Hi level: 2 – 50 V

Lo level: ≤ 1 V

Input impedance: 10 kΩ min.

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 15 V max.

■ DC Voltage: 0 – 12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 1 mA max.; at ≥ 0.5 V

INSTALLATION

Current consumption: Approx. 85 mA

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface or DIN rail; Standard Rack Mounting

Frame BX-16H available

Weight: 200 g (0.44 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.1 % (output 10 – 100 %)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: (0 – 90 %)

Approx. 2 sec. for 0 – 50 Hz

Approx. 1 sec. for 0 – 100 Hz

Approx. 0.5 sec. for 0 – 500 Hz

Approx. 0.5 sec. for 0 – 10 kHz

Ripple: 0.2 %p-p max. with input ≥ 10 %

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to output to power)

1500 V AC @ 1 minute (input or output or power to ground)

HSP SPECIFICATIONS

ES-3456 Rev.9 Page 2/3

http://www.m-system.co.jp/

MODEL: HSP

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

7.8 (.31)

CLAMP

(top & bottom)

(.59)

DIN RAIL

35mm wide

2–4.5 (.18)

HOLE

15 (.59) deep

8–M3.5

SCREW

107 (4.21)

137 (5.39)

26 (1.02)

[3.3 (.13)]

•When mounting, no extra space is needed between units.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Isolation

Waveform

Shaper

Output

Driver

–

One-Shot

Smoother

INPUT

OUTPUT

POWER

SENSOR EXCITATION

12V Supply

Base Socket

Input Connection Examples

■ Dry Contact

■ Voltage Pulse

–

PWR

+12V

PWR

4kΩ

Specifications are subject to change without notice.

HSP SPECIFICATIONS

ES-3456 Rev.9 Page 3/3

http://www.m-system.co.jp/

相关型号：