HVP-6-R/A15 [MSYSTEM]

Space-saving Plug-in Signal Conditioners H-UNIT;


型号：	HVP-6-R/A15
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners H-UNIT
文件：	总3页 (文件大小：111K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: HVP

/A3S: 20.7 – 103.4 kPa

/A2: 0.2 – 1.0 bar

Space-saving Plug-in Signal Conditioners H-UNIT

/A3: 3 – 15 psig

I/P TRANSDUCER

Functions & Features

Pneumatic Connection

blank: Rc 1/4"

• Converting a DC input into a proportional standard

pneumatic signal

/P7: 1/4" NPT fitting

• Semiconductor pressure sensor in the feedback circuit

• High resolution

RELATED PRODUCTS

Mounting Block is required. See the data sheet for model

• No mounting position effect

• High-density mounting

MB.

• Code number of the Mounting Block (e.g. MB-08)

Typical Applications

• Converting a 4 – 20 mA from a PID controller into a

pneumatic signal

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection

25 (.98)

Input & power input: M3.5 screw terminals (torque 0.8

N·m)

H•UNIT

HVP

Pneumatic: Rc 1/4" or 1/4" NPT female; (torque ≤ 12 N·m)

Material

150

(5.91)

•Housing: Flame-resistant resin (black)

•Base socket: Die cast aluminium

•Valve section: Die cast aluminium

•Screw terminals: Nickel-plated steel;

Isolation: Input to power

120

(4.72)

mm (inch)

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

MODEL: HVP–[1]–R[2]

INPUT SPECIFICATIONS

■ DC Current:

ORDERING INFORMATION

• Code number: HVP-[1]-R[2]

Shunt resistor attached to the input terminals (0.5 W)

Specify a code from below for each of [1] and [2].

(e.g. HVP-6-R/A2S/P7)

OUTPUT SPECIFICATIONS

■ Output:

19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm

[1] INPUT

Current

20 – 100 kPa, 0.2 – 1.0 bar

20.7 – 103.4 kPa, 3 – 15 psig

A: 4 – 20 mA DC (Input resistance 250 Ω)

Voltage

The output goes below 0 % if the input loop is open.

Maximum air delivery: 60 Nl/minute (2.1 SCFM)

Maximum air exhaust: 60 Nl/minute (2.1 SCFM)

6: 1 – 5 V DC (Input resistance 1 MΩ min.)

POWER INPUT

DC Power

INSTALLATION

Supply pressure: 140 kPa (1.4 kgf/cm , 1.4 bar, 20 psig)

R: 24 V DC

±10 %. Use dry air containing no carbon black or other

foreign particles. To ensure reliability use an air filter (0.01

microns).

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[2] OPTIONS (multiple selections)

Output

Air consumption: 6 Nl/minute (0.21 SCFM)

Current consumption: Approx. 30 mA

blank: 0.2 – 1.0 kgf/cm

/A1S: 19.6 – 98.1 kPa

/A2S: 20 – 100 kPa

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface; Standard Rack Mounting Frame (BX-

HVP SPECIFICATIONS

ES-3421 Rev.13 Page 1/3

http://www.m-system.co.jp/

MODEL: HVP

16H) available

Weight: 400 g (0.88 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.3 % including linearity and repeatability

Linearity: ±0.2 %

Repeatability: 0.1 %

Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)

Response time: ≤ 3 sec. (0 – 90 %)

Mounting position effect: ±0.1 % (all dimensions)

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 500 V AC @ 1 minute

(input to power)

1500 V AC @ 1 minute (input or power to housing)

EXTERNAL DIMENSIONS unit: mm (inch)

8.3

(.32)

4–M3.5

SCREW

MOUNTING BLOCK

15 (.59)

OUTPUT

CONNECTION

2–4.3 (.17) dia.

MTG HOLE

SUPPLY CONNECTION

Rc 1/4” or 1/4” NPT

NPT FITTING

25 (.98)

103 (4.06)

123 (4.84)

150 (5.91)

24 (.94)

14 (.55)

25 (.98)

•When mounting, no extra space

is needed between units.

*Fitting is provided for 1/4” NPT connection.

HVP SPECIFICATIONS

ES-3421 Rev.13 Page 2/3

http://www.m-system.co.jp/

MODEL: HVP

TERMINAL ASSIGNMENTS unit: mm (inch)

INPUT RESISTOR

(model: REM)

Input shunt resistor attached

for current input.

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

SUPPLY

PRESSURE

Pilot

Valve

OUTPUT

P / I

Converter

–

Deviation

Amplifier

–

Driver

ELECTRO-

MAGNETIC

FLAPPER

INPUT

POWER

–

Base Socket

*Input shunt resistor attached for current input.

Specifications are subject to change without notice.

HVP SPECIFICATIONS

ES-3421 Rev.13 Page 3/3

http://www.m-system.co.jp/

相关型号：