HVPN-7A1 [MSYSTEM]

Space-saving Plug-in Signal Conditioners H-UNIT;


型号：	HVPN-7A1
厂家：	M-SYSTEM
描述：	Space-saving Plug-in Signal Conditioners H-UNIT
文件：	总3页 (文件大小：108K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: HVPN

Space-saving Plug-in Signal Conditioners H-UNIT

RELATED PRODUCTS

Mounting Block is required. See the data sheet for model

MB.

LOOP POWERED I/P TRANSDUCER

Functions & Features

• Code number of the Mounting Block (e.g. MB-08)

• Converting a DC input into a proportional standard

pneumatic signal

GENERAL SPECIFICATIONS

Construction: Plug-in

• Loop powered

• Semiconductor pressure sensor in the feedback circuit

• High resolution

Connection

Input: M3.5 screw terminals (torque 0.8 N·m)

Pneumatic: Rc 1/4" or 1/4" NPT female;

(torque ≤ 12 N·m)

• No mounting position effect

• Highdensity mounting

Material

Typical Applications

• Housing: Flame-resistant resin (black)

• Base socket: Die cast aluminium

• Valve section: Die cast aluminium

• Screw terminals: Nickel-plated steel;

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

• Converting a 4 – 20 mA from a PID controller into a

pneumatic signal

25 (.98)

H•UNIT

HVP

150

(5.91)

INPUT SPECIFICATIONS

Equivalent input impedance: Approx. 310 Ω at 20 mA

The voltage measure at the input terminals changes

corresponding to the input signal as in the diagram below.

Be sure that the device at the input side allows the load

increase.

120

(4.72)

mm (inch)

approx. 6.2

MODEL: HVPN–[1]A[2]

6.0

ORDERING INFORMATION

• Code number: HVPN-[1]A[2]

5.8

Specify a code from below for each of [1] and [2].

(e.g. HVPN-2A2S)

approx. 5.7

INPUT CURRENT [mA]

[1] PNEUMATIC CONNECTION

2: Rc 1/4"

OUTPUT SPECIFICATIONS

■ Output:

7: 1/4" NPT fitting

19.6 – 98.1 kPa, 0.2 – 1.0 kgf/cm

20 – 100 kPa, 0.2 – 1.0 bar

INPUT

Current

20.7 – 103.4 kPa, 3 – 15 psig

The output goes below 0 % if the input loop is open.

Maximum air delivery: 60 Nl/minute (2.1 SCFM)

Maximum air exhaust: 60 Nl/minute (2.1 SCFM)

A: 4 – 20 mA DC

[2] OUTPUT

1S: 19.6 – 98.1 kPa

2S: 20 – 100 kPa

INSTALLATION

Supply pressure: 140 kPa (1.4 kgf/cm , 1.4 bar, 20 psig)

3S: 20.7 – 103.4 kPa

±10 %. Use dry air containing no carbon black or other

foreign particles. To ensure reliability use an air filter (0.01

microns).

1: 0.2 – 1.0 kgf/cm

2: 0.2 – 1.0 bar

3: 3 – 15 psig

Air consumption: 6 Nl/minute (0.21 SCFM)

HVPN SPECIFICATIONS

ES-3440 Rev.15 Page 1/3

https://www.m-system.co.jp/

MODEL: HVPN

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Mounting: Surface; Standard Rack Mounting Frame (BX-

16H) available

Weight: 400 g (0.88 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.3 % including linearity and repeatability

Linearity: ±0.2 %

Repeatability: 0.1 %

Temp. coefficient: ±0.05 %/°C (±0.03 %/°F)

Response time: ≤ 3 sec. (0 – 90 %)

Mounting position effect: ±0.1 % (all dimensions)

Dielectric strength: 1500 V AC @ 1 minute

(input to housing)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

8.3

(.32)

4–M3.5

SCREW

MOUNTING BLOCK

15 (.59)

OUTPUT

CONNECTION

2–4.3 (.17) dia.

MTG HOLE

SUPPLY CONNECTION

Rc 1/4” or 1/4” NPT

NPT FITTING

25 (.98)

103 (4.06)

123 (4.84)

150 (5.91)

24 (.94)

14 (.55)

25 (.98)

•When mounting, no extra space

is needed between units.

*Fitting is provided for 1/4” NPT connection.

HVPN SPECIFICATIONS

ES-3440 Rev.15 Page 2/3

https://www.m-system.co.jp/

MODEL: HVPN

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Pilot

Valve

SUPPLY

PRESSURE

OUTPUT

P / I

Converter

Deviation

Amplifier

Driver

ELECTRO-

MAGNETIC

FLAPPER

INPUT

–

INDICATOR

Base Socket

Specifications are subject to change without notice.

HVPN SPECIFICATIONS

ES-3440 Rev.15 Page 3/3

https://www.m-system.co.jp/

相关型号：