KPE-52-D [MSYSTEM]

Plug-in Signal Conditioners K-UNIT;


型号：	KPE-52-D
厂家：	M-SYSTEM
描述：	Plug-in Signal Conditioners K-UNIT
文件：	总3页 (文件大小：99K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: KPE

G: 0 – 1 mA DC (Load resistance 12 kΩ max.)

Plug-in Signal Conditioners K-UNIT

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

PT TRANSMITTER

(RMS sensing)

1: 0 – 10 mV DC (Load resistance 10 kΩ min.)

2: 0 – 100 mV DC (Load resistance 100 kΩ min.)

3: 0 – 1 V DC (Load resistance 100 Ω min.)

4: 0 – 10 V DC (Load resistance 1000 Ω min.)

5: 0 – 5 V DC (Load resistance 500 Ω min.)

6: 1 – 5 V DC (Load resistance 500 Ω min.)

4W: -10 – +10 V DC (Load resistance 2000 Ω min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

Functions & Features

• Converting an alternating voltage from a potential

(voltage) transformer into a standard process signal

• Minimum ripple

• Isolation up to 2000 V AC

• High-density mounting

Typical Applications

[3] AUXILIARY POWER SUPPLY

AC Power

• Centralized monitoring and control of power line and

power supply voltages measured at switch boards

• Monitoring abnormal voltage drops for detecting overload

B: 100 V AC

C: 110 V AC

(1.97)

D: 115 V AC

F: 120 V AC

G: 200 V AC

(3.15)

H: 220 V AC

J: 240 V AC

DC Power

123

(4.84)

R: 24 V DC

mm (inch)

V: 48 V DC

P: 110 V DC

MODEL: KPE–[1][2]–[3][4]

[4] OPTIONS

blank: none

ORDERING INFORMATION

• Code number: KPE-[1][2]-[3][4]

Specify a code from below for each of [1] through [4].

(e.g. KPE-1A-B/Q)

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01/S01)

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

[1] INPUT

Voltage

1: 0 – 110 V AC

2: 0 – 220 V AC

5: 0 – 150 V AC

6: 0 - 300 V AC

GENERAL SPECIFICATIONS

Construction: Plug-in

Connection: M3.5 screw terminals

Screw terminal: Chromated steel (standard) or stainless

steel

[2] OUTPUT

Current

Housing material: Flame-resistant resin (black)

Isolation: Input to output to auxiliary power

Input waveform: Up to 15 % of 3rd harmonic content

Overrange output: 0 to 120 % at 1 – 5 V

Zero adjustment: -5 to +5 % (front)

Span adjustment: 95 to 105 % (front)

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

B: 2 – 10 mA DC (Load resistance 1200 Ω max.)

C: 1 – 5 mA DC (Load resistance 2400 Ω max.)

D: 0 – 20 mA DC (Load resistance 600 Ω max.)

E: 0 – 16 mA DC (Load resistance 750 Ω max.)

F: 0 – 10 mA DC (Load resistance 1200 Ω max.)

KPE SPECIFICATIONS

ES-3545 Rev.2 Page 1/3

http://www.m-system.co.jp/

MODEL: KPE

INPUT SPECIFICATIONS

Frequency: 50 or 60 Hz

Input burden: 1 VA

Overload capacity: 150 % of rating for 10 sec., 120 %

continuous

Operational range: 0 – 120 % of rating

OUTPUT SPECIFICATIONS

■ DC Current: 0 – 20 mA DC

Minimum span: 1 mA

Offset: Max. 1.5 times span

Load resistance: Output drive 12 V max.

■ DC Voltage: -10 – +12 V DC

Minimum span: 5 mV

Offset: Max. 1.5 times span

Load resistance: Output drive 10 mA max.; 5 mA for

negative voltage output; at ≥ 0.5 V

■OPERATION DIAGRAM (example)

OUT

20mA

OUT

10V

150

300V

150

300V

INSTALLATION

Auxiliary power supply

•AC: Operational voltage range: rating -15/+10 %,

50/60 Hz, approx. 2 VA

•DC: Operational voltage range: rating ±10 %,

or 85 – 150 V for 110 V rating, ripple 10 %p-p max.,

approx. 2 W (18 mA at 110 V)

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 85 %RH (non-condensing)

Mounting: Surface or DIN rail

Weight: 350 g (0.77 lb)

PERFORMANCE in percentage of span

Accuracy: ±0.2 % (at 23°C ±10°C or 73.4°F ±18°F, 45 – 65

Hz)

Response time: ≤ 1 sec. (0 – 100 % ±1 %)

Ripple: 0.5 %p-p max.

Line voltage effect: ±0.1 % over voltage range

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @1 minute

(input to output to auxiliary power to ground)

Impulse withstand voltage: 1.2 / 50 μsec., ±5 kV

(input to output or ground)

KPE SPECIFICATIONS

ES-3545 Rev.2 Page 2/3

http://www.m-system.co.jp/

MODEL: KPE

CONNECTION DIAGRAM

SOURCE

FUSE

OUTPUT

–

U(+)

V(–)

LOAD

AUXILIARY POWER*

The transmitter can be powered from the input voltage when the voltage

is sufficiently stable and meets within the range of auxiliary power supply

of the unit specified in the data sheet/instruction manual.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

CLAMP

(top & bottom)

7.8 (.31)

DIN RAIL

35mm wide

2–

4.5 (.18) dia.

MTG HOLE

15 (.59) deep

8–

M3.5

SCREW

50 (1.97)

103 (4.06)

123 (4.84)

40 (1.57)

50 (1.97)

[3.3 (.13)]

• When mounting, no extra space is needed between units.

Specifications are subject to change without notice.

KPE SPECIFICATIONS

ES-3545 Rev.2 Page 3/3

http://www.m-system.co.jp/

相关型号：